Problem setting up base appeal of the DLL (win32 API?) for the control of coherent laser Verdi-G

Similar Questions

• Problem setting MTU to 9000 on the ESX host and guests

  I just set the mtu to 9000 on the ESXi host.

  Then I changed the MTU to 9000 on the linux hosts.

  The network fails.

  This should not be supported?

  vmk0 networking fe80::a236:9fff:fe3e:cbcc 64 a0:36:9f:3e:cb:cc 1500 65535 true IPv6 STATIC, PREFERRED

  Looks like your vmk0 is to use IPV6 insist of IPv4, you can try to disable IPv6 in your vmk0?

• problem setting users and groups in the areas of security

  Deploy my application ADF of my R2 Jdev11G, but the funniest, it is there is always deletion of the parent to my user setting group layout.
  
  for example. in Weblogic server: security realms > myrealm > users and groups, and then choose a user can then see 4 tabs 'General', 'Passwords', 'Attributes' and 'Groups' settings for the selected user, and then in the 'Groups' tab, if I choose a group in the column ' Group Parent: available ' in another column "elect." It will be removed later when I re - deploy application to the J-developer the next time, could you let me know how I could avoid this deletion? Thank you!
  
  
  Kind regards!
  
  My question is not clearly described or is it Bug Oracle? Do please help me to thay! Thank you!
  
  Edited by: xsyang January 6, 2012 01:14
  
  Edited by: xsyang January 6, 2012 01:25

  See the options in the app (menu)-> Application Properties-> deployment-> Weblogic (subnode under deployment in GR 11, 2), specifically the "migrate the following security objects' 'users and groups' checkbox.

  There is little documentation available on the options here: http://docs.oracle.com/cd/E24382_01/web.1112/e16182/adding_security.htm#BGBFJDED

  CM.

• Problem setting Legacy DAQ board using NOR-DAQ 6.1 for Labview

  I know that the Board of Directors is an old legacy product not supported by NEITHER, however for a low-budget project, I have 3 of these AT-MIO-16 x cards and the need to use them.

  I know I got this job in the past not distant os, however, for the life of me can't get things sorted and work.

  You use a NT box, in which this configuration used to work... uninstalled and started fees for other reasons, and I can not get the NOR-DAQ 6.1 to support LAbview 6.1 or 7.1.

  Of course, I understand the OR-DAQ 6.1 should be used for Labview 5 and older, but also know this has been successfully done in the past.

  I downloaded all knowledge base articles dozed or both support and remember to use successfully the last time that I set up so I know not somehow it works.

  My configuration is: AT-MIO-16 X to the bus combo board (called work)

  NT PC

  LabVIEW 6.1 or 7.1

  NOR-DAQ 6.1 is the most recent to support this card.

  However, it will not install its support to its latest versions of Labview and I get errors, crashing, or missing files, when I followed various circumvention of knowledge base solutions.

  I was hoping that someone has a documentation somewhere how to handle this, because it really is a matrix of spaghetti.

  I can get NOR-DAQ support files installed, and Configuration Manager works well, finds the map and allows its parameters to be defined.

  But when I load the DAQ vi of any type, Labview accidents and the wizard of data acquisition channel does not work at all (no error).

  Thank you

  Yes, the installation program from the folder of disks for NOR-DAQ 6.1 on the ftp site has worked well.

  Workaround. Thank you

• Problems with recovery. Failure of the control of BurnBoot of P2PP

  Hello

  I bought the HP, laptop HD got crashed. Got the replacement. But now the OS recovery is the problem. I bought OS USB fromHP backup recovery.

  Recovery is running for a few hours, but iam receive not over and message. He either restart the boot process if the USB is connected, or else it gives error checking has no P2PP BurnOut.

  Is there any solution for this... ?

  I've seen a few posts wit BIOS change date... is applicable to my laptop.

  mine is HP envy 4 t 1100

  I'm trying the change of date of the BIOS for 2012 and see if it works. If this is not the case, change it back. Then I would try resetting the BIOS to default settings by pressing F9 then in the BIOS. Save and exit.

• PS CC 2015.1 lighting effects problem again... no point, the control of spot or infinite for placement is visible, not my graphics card and ideas yet?

  Same problem as in the past... they do not have the bug still worked?

  Nevermind, problem solved... apparently your new version will migrate all preferences of the old previous user as reviews, show all

• what setting to change to avoid the "unable to allocate new log"

  Hello everyone.
  I'm on 9i r2 on windows server 2003 edition of the SD with attached ISCSI. I have the drive 1 recovery as well as DBF newspaper group in the data directory. 2 other groups redo are on the 2 local disks separated and archiving logs (in another folder).
  
  I'm getting some errors "cannot allocate new logs" every two days and in Event Viewer "process Archive error: Instance ORACLE prdps - cannot allocate Journal, check-in required.
  
  
  I do not know what setting I should change.
  
  Current configuration:
  db_writer_processes 1
  dbwr_io_slaves 0
  
  
  
  Here is the output from v$ sysstat:
  49 8 7410575 written DBWR checkpoint buffers
  50 8 7748 written DBWR transaction table
  51 DBWR undo block writes 8 4600265
  52 DBWR revisited being written 8 5313 buffer
  DBWR 53 free ask 8 26383
  54 DBWR free buffers are 8 19838373
  55 DBWR lru scans 21831-8
  56 DBWR summed scan depth 8 21265425
  57 8 21265425 scanned DBWR buffers
  58 control DBWR 8 1719 points
  59 DBWR cross instance writes 40 0
  60 fusion DBWR written 40 0
  
  
  It's alert.log:
  Fri Mar 06 00:25:52 2009
  Arc0: Complete 1 thread 1 log archiving sequence 7004
  Fri Mar 06 00:25:54 2009
  Thread 1 Advanced for you connect to sequence 7006
  Currently Journal # 3 seq # 7006 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO03A. JOURNAL
  Currently Journal # 3 seq # 7006 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO03B. JOURNAL
  Currently Journal # 3 seq # 7006 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO03C. JOURNAL
  Fri Mar 06 00:25:54 2009
  Arc1: Evaluating archive log 2 thread 1 sequence 7005
  Arc1: Begins to archive log 2 thread 1 sequence 7005
  Creating archives LOG_ARCHIVE_DEST_1 destination: "F:\ORACLE\ORADATA\PRDPS\ARCHIVE\PRDPS_001_07005.ARC."
  Fri Mar 06 00:26:03 2009
  Thread 1 Advanced for you connect to sequence 7007
  Currently journal # 1, seq # 7007 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO01A. JOURNAL
  Currently journal # 1, seq # 7007 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO01B. JOURNAL
  Currently journal # 1, seq # 7007 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO01C. JOURNAL
  Fri Mar 06 00:26:03 2009
  Arc0: Assessment of the archive log 2 thread 1 sequence 7005
  Arc0: Impossible to archive log 2 thread 1 sequence 7005
  Newspapers archived by another process
  Arc0: Assessment of the 3 thread 1 sequence 7006 log archives
  Arc0: Starts to archive log 3 thread 1 sequence 7006
  Creating archives LOG_ARCHIVE_DEST_1 destination: "F:\ORACLE\ORADATA\PRDPS\ARCHIVE\PRDPS_001_07006.ARC."
  Fri Mar 06 00:26:15 2009
  Arc1: Finished 2 thread 1 log archiving sequence 7005
  Arc1: Evaluating archive log 3 thread 1 sequence 7006
  Arc1: Impossible to archive log 3 thread 1 sequence 7006
  Newspapers archived by another process
  Fri Mar 06 00:26:16 2009
  Thread 1 cannot allot of new newspapers, sequence 7008
  All newspapers need to check-in online
  Currently journal # 1, seq # 7007 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO01A. JOURNAL
  Currently journal # 1, seq # 7007 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO01B. JOURNAL
  Currently journal # 1, seq # 7007 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO01C. JOURNAL
  Thread 1 Advanced for you connect to sequence 7008
  Currently Journal # 2 seq # 7008 mem # 0: E:\ORACLE\ORADATA\PRDPS\REDO02A. JOURNAL
  Currently Journal # 2 seq # 7008 mem # 1: F:\ORACLE\ORADATA\PRDPS\REDO02B. JOURNAL
  Currently Journal # 2 seq # 7008 mem # 2: G:\ORACLE\ORADATA\PRDPS\REDO02C. JOURNAL
  Fri Mar 06 00:26:16 2009
  Arc1: Evaluating archive log 3 thread 1 sequence 7006
  Arc1: Impossible to archive log 3 thread 1 sequence 7006
  Newspapers archived by another process
  Arc1: Evaluating archive log 1 thread 1 sequence 7007
  Arc1: Beginning to archive journal 1-wire 1 sequence 7007
  
  
  Should I just change
  db_writer_processes 1
  dbwr_io_slaves 2
  
  Thank you
  Any help appreciated.

  This message indicates that Oracle wants to re-use a redo log file, but
  the
  associated with corresponding control point is not over. In this case,.
  Oracle
  Wait for the control point is carried out entirely. This situation
  may be encountered especially when transactional activity is
  important.

  search for:
  -Background checkpoint started.
  -Control your mat point.

  These two statistics should not differ more than once. If it is

  not true, your base weighs on the control points. LGWR does not reach
  continue
  next write operations that ends the control points.

  Three reasons may explain this difference:

  -A frequency of control points which is too high.
  -A control points are starting but not filling not
  -One DBWR writing too slowly.

  How to resolve incomplete control points is through tuning
  control points and
  newspapers:

  (1) gives the checkpoint process more time to scroll through newspapers
  -Add more redo log groups
  -increase the size of the logs again
  (2) to reduce the frequency of control points
  -increase the LOG_CHECKPOINT_INTERVAL
  -increase the size of newspapers in restoration online
  (3) improve the effectiveness of the control points for the CKPT process
  CHECKPOINT_PROCESS = TRUE
  (4) set LOG_CHECKPOINT_TIMEOUT = 0. This disables the verification script
  based on
  time interval.
  (5) another way to solve this error is for DBWR to write quickly
  the dirty
  buffers to disk. The parameter associated with this task is:

  DB_BLOCK_CHECKPOINT_BATCH.

  DB_BLOCK_CHECKPOINT_BATCH specifies the number of blocks that are
  dedicated
  inside the batch size for writing the control points. When you want to
  speed up
  control points, it is necessary to increase this value.

• Bug found during the use of references to the control in subVis on Compact RIO?

  Hallo,

  I have a simple task. I want to read higher VI into a Subvi the real value of a control to a level. I want to solve this problem by using a reference to the control.

  I have attached a simplified program that shows this.

  But the problem is now. When I run the main VI on a cRIO-device, the indicator "DataByReference" is not updated with the actual value. Only when I opened during execution of the "RefMain.vi" too, then everything works fine.

  More strange thing is, when I run the VI of hand on the host PC, everything works well, also without having to open the "RefMain.vi" when executing.

  Someone at - it an explanation for this behavior?

  Thanks in advance!

  Bernd

  This isn't a bug.  See this explanation.

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• I get an error message at the beginning: "Problem starting C:\Program Data\IntelBackup Online.dll"

  Original title: I get an error message at the beginning upward:

  "Problem starting C:\Program Data\IntelBackup Online.dll" under this line, it is said: 'the Spicific mode is not found' how can I fix?

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• My computer will not start, getting warning that the iertutil.dll is missing for Internet Explorer

  Anyone know how to fix this problem? I get a warning saying that the iertutil.dll file is missing for internet explore. When I start my computer, all I get is my screensaver with no office. The only way I can continue any part of my computer is to go to alt del to get to the control task manager.

  Do you mean you see a message like this:

  Explorer.EXE - unable to locate component
  This application has failed to start because iertutil.dll was not found. Reinstalling the application may fix this problem.

  That file should never be missed and it takes an extra effort to remove it on purpose because there are one of 3498 files who cares about Protection of file Windows (WFP).

  If explorer.exe is not running, all you will see is your screen background image.

  The file is in this folder (assuming that XP is installed on your C drive):

  c:\Windows\System32

  Since you can get into the Task Manager do the following:

  Since the Task Manager, click file, new task (run...) and then click Browse and navigate to this folder:

  c:\Windows\System32\dllcache

  If you are unable to find or do not see the dllcache folder, because your system is not configured to display hidden files and folders, simply type the path to the folder name in the "Open:" box

  c:\Windows\System32\dllcache

  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate copy the iertutil.dll file backup in the folder c:\windows\system32\dllcache, made a right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  If you can't find the file in the dllcache folder (should be), depending on your installation, there may be a copy of the file on your system in this folder:

  c:\windows\ServicePackFiles\i386

  If you find there, copy the file missing from there and paste it where it belongs

  It is possible that some malicious software or your antivirus/antimalware indeterminate quarantined (actually deleted) the right file and the backup copy of which must be in the dllcache folder.

  In this case, you can download a copy of my SkyDrive and use networks disks (on foot) to bring it to the system afflicted on a USB key or a floppy disk.

  You may be able to 'Run' iexplore.exe in the Task Manager to get on the Internet and just download it.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Since it is all very suspicious to meI would follow with this:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Printing problem with OE - 6 format since the upgrade to IE - 8: no space between the body and the subject line text.

  My computer is configured with XP SP3 and IE - 8. I've been using Outlook Express 6.0 (update of MS according to needs). Messages are always printed correctly. Lately, however, the body of the message printed directly below the object without line - the space between them. This happens on my Brother laser printer and my HP inkjet printer. I have not changed my settings of the printer. I've recently updated to IE - 7 to IE - 8; However, I see nothing in the settings of IE - 8 to explain this change in print. I recently installed "MobileMe" Panel Apple configuration, which has installed a separate set of folders in the list of folders in OE - 6. I did a clean (with Revo Uninstaller) uninstalling the MobileMe Control Panel, removed the extra e-mail account/folders and rebooted. Yet the printing problem.

  How to restore the space of line between the subject and the message body?

  Hello

  1. How is like print preview?
  2. don't you make changes to the footer settings?

  Method 1.
  If that doesn't help you can not save the file wmp.dll
  a. log on as an administrator.
  b. Click Start, type cmd.exe in the Run dialog box right click on cmd.exe, click Run as administrator and then click on continue.
  c. at the command prompt, type regsvr32 oled32.dll and press enter and then click OK.

  Method 2.
  If this problem started occurring recently, you can restore the computer to a previous state. You lose Internet Explorer 8 and return to Internet Explorer 7. In this way, we can check whether or not the root cause of the problem is installation of Internet Explorer 8.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help setting up a banner on the 25 theme

  Hello
  I managed on the basis of set up a banner on the 21 theme, but the theme 25, it doesn't work.
  
  App: 103
  [http://fam-erp.com/apex/f?p=103:3:3178558156212 url:] Example of work on the topic 21
  
  App: 131
  [http://fam-erp.com/apex/f?p=131:3:7074920954842:NO url:] Does not for example the 25 theme
  
  [url http://fam-erp.com/i/images/fam/documentation/index.html] Banner docs
  
  Can you please take a look:
  
  http://fam-ERP.com/Apex
  Workspace: test
  user: test
  PWD: test
  
  Best regards
  Fateh

  Fateh says:
  Hello
  I managed on the basis of set up a banner on the 21 theme, but the theme 25, it doesn't work.

  App: 103
  [url http://fam-erp.com/apex/f?p=103:3:3178558156212:] Example of work on the topic 21

  App: 131
  [http://fam-erp.com/apex/f?p=131:3:7074920954842:NO url:] Does not for example the 25 theme

  [url http://fam-erp.com/i/images/fam/documentation/index.html] Banner docs

  Can you please take a look:

  http://fam-ERP.com/Apex
  Workspace: test
  user: test
  PWD: test
  What is a plug-in for + {: identifier of the thread = 2462853} +?

  Great idea in the pile of "jQuery is not an object" error messages JS (you want always to the JS console?). Plug-in scripts have been included in the page model before the standard APEX/jQuery scripts. Reduced to an error "undefined is not an object" when they have been moved after them. Can't come up with something more on an iPhone on a bus...

  Published by: fac586 on December 3, 2012 18:10

  No, the score for debugging to jQuery with an iPhone on a bus 22. Same problem as in previous discussions: lose jQuery.noConflict () during the initialization of the plug-in...