Problem Solution Center IdeaPad Y700-14ISK

Similar Questions

• HP - scanning problem solution Center

  I was in the middle of the digitization of images in a Word 2010 by using my HP6310 all in one document. After scanning a selected section of a page like I did several times, I got a message saying:

  "An internal error occurred during the processing of the document. Click OK to close the program and then try one of the following values:-restart the program. -Restart the PC and then try again. -Reinstall the software photos & images and try again. »

  I tried to close and restart the HP Solution Center and the word. I tried scanning in a new Word document. I tried to restart the PC. I've updated the software of HP. In the process, I found and downloaded the HP printer Diagnostic tools. When I ran the Scan doctor, I got a message saying:

  «Center of solution error: your system needs an update to fix this Solution Center error.» Click on the "Get Update" to download the update. Once the download is complete, run the downloaded file to update your system. »

  However, when I clicked on "Get Update", I received the following message: 'could not open the page. The service or the information requested is not available at this time. Please try again later. (Error: system-websrv_unavail) »

  I tried to restart several times over a period of several hours.

  Before this problem in his set, I started to receive error messages when I tried to save the Word file containing scanned images. The messages said that I could not save due to a file permission error. The message does not always appear, and I found I could work around the problem by using the function save pennies on the file tab. I don't know if these two problems are related.

  I am using Windows Vista 64-bit.

  Hi @CL-HP

  There are indeed a few updates available, which may be necessary; However, I think it would be better first to perform a full uninstall, then reinstall the software, then look for the necessary updates.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Series of HP Photosmart C4500 - problem Solution Center

  Whenever I start my computer, a box appears that says "Solution Center" - the component you are trying to use is on a network unavailable resource. Check ok to try again or enter a different path to the folder containing the installation package. The path shown is Solution Center.msi and use source is: C:\users\toni\appdata\local\temp\7zS36A7\setup.

  I clicked on 'Browse' computer, local disk C, program files (x 86) created HP 29/09/2013, open cllicked and nothing worked. I had to click on 'Cancel' many times before disappearing. Then he said: check HP site for a fix.

  HP is no longer my printer HP Photosmart 4520 present on its support site and I can't find any way to stop this message from appearing whenever I start my computer which is a HP Pavilion dv6-1230us Entertainment Notebook PC.

  The printer works fine and when I opened the center of Solution from the Start button, it opened.

  Hi ToniB1,

  Thanks for providing this information.

  I would disable the two of them. Everything that is related to HP.

  Then restart it to see if the error appears again.

  If you are still questions then I'd another uninstall and reinstall. Sorry, I know that you have already done this a few times, but with these additional steps should solve the problem.

  Please follow the steps listed below:

  Uninstalling the printer software.

  Ignore the name of the model.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%.

  Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted.

  Run all Windows updates.

  I would register in the register of installation of the window.
  Go to start, select Run type in msiexec / unregister then click OK, and then type msiexec/regserver, then click OK.
  (Make sure that you type it in exactly, there is a space between the two)

  Disk Cleanup tool system Accessories\ How to delete files using disk cleanup.

  Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html

  Restart the computer.

  Go to the start up programs and disable any startup programs to see if this will allow the full software to install. (msconfig)

  Apply the settings, and then restart the computer.

  Temporary disable all Antivirus software.

  Reinstall the software of the printer again.

  The printer test again to see if everything is installed.

  Please let me know the results.

  Thank you.

• Problem Solution Center in windows 8.1

  Hello. I HP Photosmart C7283.

  After the system update (I have install Windows 8.1), when I run the HP Solution Center, I got an error: "device not finished and cannot start the solution Center.". The screen on the Russia:

  OK, I have remove all the drivers, programs etc. of HP, download new drivers for hp (to Win 8.1) site, reinstall it. But the error does not disappear... I have the same error.

  I can print, but I can't scan into the computer, for example.

  Connect the printer via Wi - Fi, the connection is good and right (printer can print)

  How to fix this error and launch HP solution Center?

  I'm sorry for my English, Russian

  UPD:

  I download 'master of installation printer HP for Windows '. It download the drivers. In procees of installation, when I choose, that my printer to connect via Wi - Fi, installation of show me an error: cannot complete the configuration of the printer. I can repeat (show the same error) or ignore it. Screenshot on the Russia:

  

  After I pressed Next, the installation is complete. The Office has added icon "add a device". I run, but repeat the error on the screen 2.

  All this time the printer and the computer has been connected

  That means, this DEVICE unfinished facility. Because of its Solution Center doesn't start... HEEELP, please.

  Hi Vladimir78,

  The only thing I can suggest at this stage is to get a printer USB cable, or you can restore to a previous point while it was working properly. Here is a document on how to do it.

  http://support.HP.com/us-en/document/c03327545

  Thank you.

• Solution Center fails to install - Photosmart C4345 Windows XP SP3

  Product HP: Photosmart 4345 all-in-one

  System: Windows XP Home SP3

  Problem: Solution Center fails to install - shortcut icon is present, but each time Center is launched, it tries to install a missing element, the applications disc.  This can be cancelled with 2-3 closures of the window installation and the request for the drive.  Printer and scanner can then be controlled form the screen with the mouse, but Center tries intermittently to install the missing module.  VERY ANNOYING.

  Trying to follow demand drive ease of installation, the message appears:

  Module

  C://Windows/System32/Macromedia/Flash/Flash9B.ocx

  Unable to save.

  HRESULT - 2147720473

  There has been no recent update is causing this problem.  It is at least a year and can be associated with automatic updates for the HP programs - which appear to be very unstable and crash constantly - or MS XP.  Both are on the automatic update.

  Solutions of someone?

  There is an HP update which should fix this.  You can get the update from the link below.  Let me know what happens.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&cc=us&DLC=en&LC=en&OS=228&product=3710120&sw_lang=

• New Ideapad 500 has no test Lenovo Solution Center

  Hello

  I just got a new Lenovo Ideapad 500 and test the Solution Center, it will return the following errors:

  Result code: WVC003002-RK8XFE

  Device: Intel(r) HD Graphics 520

  Mathematical operations failed

  PCI/PCI-e test failure

  WMB008000-RK8XFE

  What should I do? How can I solve this problem?

  Thank you

  
  

• Solution Center said problem as the printer is disabled

  Since the upgrade to 8.1 Windows solution Center says that my printer is disabled. This isn't the case, that my printer is enabled and works well. I deleted and reinstalled the printer drivers and also Center solutions lenovo, but he always tells me that I have a problem with the printer is disabled. Device Manager tells me he is correctly installed and activated. How can I get this message from the solution center off?

  Thanks for your reply Peter. I did as you suggested and off the notification, regards Steve

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• HP HDX Premium Series: hpdeskjet F4280 all-in-one series HP Solution center problem

  When I try to open the application "Solution Center" I get the following message "the feature you are trying to use is on a network unavailable resource."

  After that, I click OK after a few seconds later the open apps but is not working properly

  Everything started after that I uninstalled the printer software and reinstalled

  I tried twice and I have the same problem

  Hi @arturomv,

  I see that you have a problem with your HP Solution Center for your HP Deskjet F4280 running on Windows Vista. I'm sorry to hear that, but happy to help!

  Please solutions within this guide, in Windows Vista, the printer is available are no longer in the list of printers on the network. (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  Hope this guide to solve your problem and have a nice day!

• Printing problem after upgrade HP solutions Center / windows 7

  Hello everyone,

  Since I've updated my PC for windows 7 (and a new version of the HP Solution Center), I can print is no longer any document (the only way to get something out of the printer, print a test through the solution Center page).  Communication is Ok (correct ink levels etc.).  Printed materials appear in the print queue, and then disappear as if they are printed, but nothing is (no error message).

  I have Windows 7 Home premium, to C5180 all-in-one USB connection.

  I already tried the HP diagnostic program and uninstall / reinstall.

  Any suggestion is welcome.

  Thank you!

  I would like you to try this.  Unplug the usb cable from the printer and uninstall the printer software.  Then go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153481&lc=en&cc=us&dlc=en&lang=en&cc=us select 32 or 64 bit and install this "HP Print fix software when upgrading Vista to Windows 7" then reinstall your WIndows 7 software for this printing.  Let me know if this solves your problem

• I cannot retrieve the password for an old windows live id I was on windows live solutions Center, but they can't solve my problem. I've been at this now since Friday. Can someone help me?

  I can't recover the password for an old windows live ID, which is also an old, inactive e-mail address. I've been on the windows live solutions Center, but they can't solve my problem. They continue to send a defective, condescending loop link to my e-mail address active as a soloution. It simply doesn't get it. I've been at this now since Friday. Can someone help me?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  It will be useful.

• Problems to install the Solution Center

  HP Photosmart C6380, later Center of HP solutions web site lists as compatible Windows 8.1.

  408 PS_AIO_4_C6380_NET_FULL_WIN_WW_140_: this file will not be installed Solution Center, only drivers, even though it claims to have installed all the software.

  Is there a way I can get the software suite to a .iso file so I can burn my own installation disc? Then I might be able to navigate the disc and try to install the Solution Center in itself.

  Thank you

  Dave

  Hi Dave49,

  I'm sorry to hear that the final stages has not solved the problem. The next step would be to complete an uninstall of level 3. I've included the steps below for you.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L3

  Once the uninstall is complete, you will need to empty the temp folder. To do this simply follow the steps,
  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  Once you are in the temp folder, you can remove all entries listed. Note that not all entries will be deleted, because some programs are open. For these entries, you can click on ignore. Next, you need to empty the trash. After the Recycle Bin has been emptied, you will have to perform a clean boot. I've included the document "How to perform a boot in Windows". If your computer does not request it, restart your computer.

  Once restart is completed, you will need to download and install the software again. I have included a link to the ' all-in-one HP Photosmart C6300/6324 Printer series full feature software and driver '.

  Please let me know if you are successfully able to install all software.

• HP J3608 Fax problem: recipient cannot hear me when sending faxes using the HP Solution Center

  Hi all

  I have problems with our HP Officejet J3608. I have explored its functionality to send the fax using Solution Center HP AIO. So I opened a word file > press print to the fax > then a dialog box appears asking you for the recipient and all other info > I enter the number of the recipient fax and press send fax > then the fax includes the number and rings > the recipient responds by saying hello, "who is this?" > I said hi, "can I have a fax tone?" > the recipient says ' Hello? Hello?? "then drops the phone.

  Then I found that the recipient cannot hear us on our part, I tested it with other recipients. The recipient is on strong talk and when I lift the phone in the device, it is always to steal it. What is the problem here?

  Take note that this is not happening when we directly dial the telephone number of the device and feeding it with a printed version.

  Thank you very much and I hope someone answer my question. This will really mean a lot.

  Depending on the machine you send your fax to depends on how he responds. Most fax machines have no phone attachments, and the 'auto response' is a parameter that allows the printer to recognize the incoming faxes and receive them automatically. What you describe is the manual answer option, in which the recipient recognized the incoming fax and must manually answer.

  In this scenario, it will depend on the machine you are sending to and whether it can receive in this same way.

  Let me know!

• Help: Solution Center problem Windows 7 (64-bit)

  Hello

  I have a Photosmart 3210 and I am running Windows 7 (64-bit). I downloaded the last Center of Solution for my o/s, but have the following problem, as shown in the image below, can someone help me because I am not able to use something other than the printing functionality

  http://i120.Photobucket.com/albums/O161/killperry/HPSolutionCenterError.jpg

  (This site does not support images?)

  Thank you!

  Message edited by killperry on 05/11/2009 13:06

  I think that we have found the problem... I uninstalled Flash by using the uninstall program located here Flash: http://kb2.adobe.com/cps/141/tn_14157.html

  I then reinstalled Flash Player and open the HP Solution Center. Then he showed a dialog box that says that the Plugin Flash to Internet Explorer. I use Firefox as my main browser and therefore never installed the Flash Plugin for Internet Explorer, so the graphics error.

  Answer = install Internet Explorer Flash Plugin

  Thanks for your help JonW, that had been annoying me for several days!

• Communication of printers HP Solution Center, Port 427 problems

  I installed the HP Solution Center in the installation process it finds my printer on the network.  I can call the pritner using internet explore and type the IP address of the printer, I can print it, but HP Solution Center can 'communicate' I get the following error message:

  "Your computer is unable to communicate with your printer to 192.168.1.102. This can be the result of firewall software. If you use a software firewall, make sure that the 427 UDP port is unlocked for the inbound and outbound traffic.

  , The software cannot communicate with your printer address IP 192.168.1.102. This can be caused by many factors; the most common is the firewall software. »

  How to open port 427 or is there another solution?

  I had the same problem. I went to add devices and added the HP Officejet 6500 and it started to print. For some reason any computer would not communicate with the printer until it was added. I hope it works for you.