Problem Solution Whit

Similar Questions

• Problems with white print

  OK, so I work for a company where I prepare material for printing on tin cans surface. Usually I give myself the EPS files with colored rectangles that show where the required pattern must be established, to be printed exactly on the Tin. I put the pattern, remove the colored rectangles, and save to the pdf format.

  Initially he had trouble, because no white has been printed. It makes sense when you print on white paper, but this is not what we are dealing with.

  My idea to fix it was to place a white object in the same form as the rest of the ground under it. It worked and it seemed that things would work out. However the second time, it did not work.

  The only difference I noticed that might have caused this, that was when opening these files, which worked in Illustrator, the program asked whenever I want to open as a RGB or CMYK, whereas this new does not. After sitting for hours, I couldn't do things, but luckily the people faced with the printer do it differently, and if it worked.

  I was hoping that I would be at peace now, but no! It simply doesn't get it. This time, it's just white surface, nothing above him. I've searched and searched, found only one solution... In the menu attributes, I put the white surface "Overprint fill", but even this does not work!

  Anyone has an idea why the printer there would be just insist on printing is not white?

  I would be very grateful to anyone who can offer help.

  If I understand the problem: the white man must be a direct tone.

  And maybe you would like to discuss the problem with people like to know what type of file and the colors they need.

• HP 7520: HP 7520 - size output scanning image problem, excess white border

  I have a HP 7520.  For months I've been scanning black and white photos (one by one, not with the autofeeder) of different dimensions to a pin connected to the scanner code reader successfully. No problem at all and no grand only white spaces surrounding the photo when I opened the scanned photos. And I have nothing special to do this - I have yet to enter the 7520 HP set up menu on my computer. The HP 7520 seems to have missed to automatically size the size of the photo.

  I disconnected the HP 7520 recently for several days and changed my password IP. Now when I scan the pictures, I have a big white page with the photo in a corner. I read the other posts on the same problem, and that the following comments:

  1. Automatic harvest. I can't find this option anywhere on the pages of preferences when I go on the 7520 HP set up menu on my computer. I can't find even in the 100 page manual although autocropping is mentioned on page 21 of the manual.
  2. Clean the scan bed. I did it.
  3. Updates. All the updates appear to be installed.

  None of the above has worked, and I don't want to have to manually set the size each time, unless there is no other solution. But there must be another solution as the scanner worked so well 6 months without effort or installation on my part.

  That pasa?

  Hello

  Probably you (or others) have wrong change the shortcut to scan photos. Now, you can create another shortcut to analyze the size OF the photos and save it. The next time use you this shortcut to scan, you will always get the same result.  Please try to use HP Scan:

  Select your options (size, PPP...) and then save it as a shortcut.

  Moreover, the possibility of harvest in buried under Advanced settings very convenient when you scan several photos at once. I scan normally 4 photos and the culture option gives me 4 files, a photo of each.

  Kind regards.

• Problem Solution Center IdeaPad Y700-14ISK

  Ran solution Center and got the result WVC007002-RL8ZHK after the test of mathematical operations code failed. Pretty sure it's a false positive, but someone has a solution for this problem to come?

  Yes, it's a bug in the driver. You will need to upgrade to the latest version of the driver by forcing it through Windows Update. To do:

  1) open up Device Manager by right clicking on the Start Menu button.

  (2) open the option of cards do a right-click on the Intel HD Graphics 530

  (3) select the driver... software update and follow the instructions.

  After your next restart, will pass the test.

• Security system CLD Exam problem solution? Crazy?

  I just started working on the problems of CLD example.  I use Labview for about 10 years - so everything I do is old school.

  I am writing this solution for the example of security system.  There are arrays of switches to represent the alarm, derivation and inviolable

  signals - and then a loop to go through each 'zone' logically determine the State (normal, alarm, circumvent or modify).  To make the

  'State of the area' indicator an indicator is easily scalable, I have the loop of the "area of" change the color of a Boolean indicator LED.  Then I take a

  her picture and display a table of pix.

  Question: It works fine, good answer-, but to happen?  Is there a better way? I have attached the diagram...

  BADVI wrote:

  But somehow, I couldn't have the property/reference structure right key to change the colors of the individual indicators, once they are in the table - which is at the origin of the stupid 'picture of the images' work around.  Apparently, you can reference individual cluster elements to change their colours (but not individual array elements?). It was certainly not an obligation but a reflection of 'fast' go around because I couldn't ref elements the individual LED to the table.

  Fix.  Is the only thing that can vary between the elements in an array useful.  Other elements such as color, display format, visibility, etc are not.  So a Boolean array can have each element a true or false.  But all items must share the same color property.

• HP - scanning problem solution Center

  I was in the middle of the digitization of images in a Word 2010 by using my HP6310 all in one document. After scanning a selected section of a page like I did several times, I got a message saying:

  "An internal error occurred during the processing of the document. Click OK to close the program and then try one of the following values:-restart the program. -Restart the PC and then try again. -Reinstall the software photos & images and try again. »

  I tried to close and restart the HP Solution Center and the word. I tried scanning in a new Word document. I tried to restart the PC. I've updated the software of HP. In the process, I found and downloaded the HP printer Diagnostic tools. When I ran the Scan doctor, I got a message saying:

  «Center of solution error: your system needs an update to fix this Solution Center error.» Click on the "Get Update" to download the update. Once the download is complete, run the downloaded file to update your system. »

  However, when I clicked on "Get Update", I received the following message: 'could not open the page. The service or the information requested is not available at this time. Please try again later. (Error: system-websrv_unavail) »

  I tried to restart several times over a period of several hours.

  Before this problem in his set, I started to receive error messages when I tried to save the Word file containing scanned images. The messages said that I could not save due to a file permission error. The message does not always appear, and I found I could work around the problem by using the function save pennies on the file tab. I don't know if these two problems are related.

  I am using Windows Vista 64-bit.

  Hi @CL-HP

  There are indeed a few updates available, which may be necessary; However, I think it would be better first to perform a full uninstall, then reinstall the software, then look for the necessary updates.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Series of HP Photosmart C4500 - problem Solution Center

  Whenever I start my computer, a box appears that says "Solution Center" - the component you are trying to use is on a network unavailable resource. Check ok to try again or enter a different path to the folder containing the installation package. The path shown is Solution Center.msi and use source is: C:\users\toni\appdata\local\temp\7zS36A7\setup.

  I clicked on 'Browse' computer, local disk C, program files (x 86) created HP 29/09/2013, open cllicked and nothing worked. I had to click on 'Cancel' many times before disappearing. Then he said: check HP site for a fix.

  HP is no longer my printer HP Photosmart 4520 present on its support site and I can't find any way to stop this message from appearing whenever I start my computer which is a HP Pavilion dv6-1230us Entertainment Notebook PC.

  The printer works fine and when I opened the center of Solution from the Start button, it opened.

  Hi ToniB1,

  Thanks for providing this information.

  I would disable the two of them. Everything that is related to HP.

  Then restart it to see if the error appears again.

  If you are still questions then I'd another uninstall and reinstall. Sorry, I know that you have already done this a few times, but with these additional steps should solve the problem.

  Please follow the steps listed below:

  Uninstalling the printer software.

  Ignore the name of the model.

  Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%.

  Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted.

  Run all Windows updates.

  I would register in the register of installation of the window.
  Go to start, select Run type in msiexec / unregister then click OK, and then type msiexec/regserver, then click OK.
  (Make sure that you type it in exactly, there is a space between the two)

  Disk Cleanup tool system Accessories\ How to delete files using disk cleanup.

  Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html

  Restart the computer.

  Go to the start up programs and disable any startup programs to see if this will allow the full software to install. (msconfig)

  Apply the settings, and then restart the computer.

  Temporary disable all Antivirus software.

  Reinstall the software of the printer again.

  The printer test again to see if everything is installed.

  Please let me know the results.

  Thank you.

• WRT1900ac internet connectivity problem, internet white flashing light!

  So my wrt1900ac has been flashing white tonight. I logged into the router, and do you have a router reboot. That did not work, then I rebooted my modem still does not work.

  After all that I did a factory delivered to my wrt1900ac which was a big mistake because now my wrt1900ac THAT WILL NOT back upward. He remains stuck on the detection of internet.

  So I did a factory reset my modem which is c1000a and after resetting my modem works fine connected to the wifi without problem what so ever. I handed my modem tried to re-setup my router and transparent bridge mode. Once more the internet wrt1900ac light just flashes white and not connecting, even if my modem works perfectly fine, can anyone help me please?

  Sorry, I'm such a newbie to metworking. I take a Cisco class at my local community college. I have no ideal just like the static IPS of default gateways. Now, I know I put my router for a PPPOE connection with my ISP provided connection information. And when I did a factory reset, I continued stuck in the 1st stage of the installation. I know that it does not help anyone to help me. But if someone could give me a few steps on exactly what to check before considering again to exchange it.

• HP pavilion cannot launch Windows-Stuck on pc problems - solutions of attemptin quotes

  My HP pavilion stuck on diagnose PC-tent loop solution after initiatin automatic repair of pc.

  I run the HP PC hardware Diagnostotic and I got:

  INTELLIGENT control: PAST

  Long DST: FAILURE

  FAILURE ID: 9LG1VQ-6NP78B-MFPWXG-61AL03

  PRODUCT ID: E2H36EA #AB7

  With regard to the verification of memory, he passed the test.

  the model is HP Pavilion Notebook 15 pc running windows 8

  When you press f11 to the system recovery

  Recovery

  Your PC needs to be repaired

  A required device is not connected or cannot be accesed.

  Error code: 0xc0000185

  You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the PC manufacturer

  I don't possses not the windows disc 8 since he came with the laptop.

  I searched on the net that removing the battery and wait can work, but it didn't.

  Any suggestions or maybe no matter what diagnosis on what's wrong with my laptop?

  Hello

  Error code 24 characters for the lond Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the startup problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced (you will also need to order a set of replacement of the recovery media to reinstall the operating system on the new drive) - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Report problems & Solution

  Hello:

  I have a laptop - Vista-32 operating system.  Can someone help me with these items.  I keep getting the following errors - ' hpsudelpacks.exe. Windows Defender Command Line Utility (telemetry Mp) & hpqddsvc.  I dial the number 800 several times but failed to get any help.  I did a system restore, but the problem is not going away.  I really need someone to help me here.

  Hello

  1.hpsudelpacks.exe

  This file is in relation to HP Total Care Advisor. This software has a lot of bugs. Just uninstall it and your problem will be solved.

  2hpqddsvc

  See this topic. In the second message written by Dexter you will find solution about this problem too.

• Selection of 64-bit Windows 7 text-to-speech: problems & Solutions possible

  There are several problems with the default value of the TTS voice implementation in
  Windows Server 2008 R2 and Windows 7 64-bit edition.

  Control Panel TTS voice option lists only properly registered
  Voice of 64-bit. Microsoft Anna is the only 64-bit voice which is
  provided with operating systems. Kate of Loquendo, which is
  probably the best voice quality TTS that is currently available,
  a versions 32 and 64 bit. Kate is difficult to obtain in small
  quantities and very expensive. The best alternative is
  considered Heath voice Acapela Group. It is only
  currently available as a 32-bit version for Windows operation
  systems. (64-bit Heather is available for Apple Snow Leopard).

  There is a fix that allows the display of all installed voices and
  the selection of any one as the default voice of the system. It's
  run:

  C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl

  instead of using the selection of voices TTS of Control Panel.
  This fix works fine except for one unfortunate problem.

  The statement of Visual C/C++

  HR = m_cpVoice.CoCreateInstance (CLSID_SpVoice);

  Configures a voice object regardless of the default value correctly
  Voice System.

  The Visual Basic statement

  Voice = new SpeechLib.SpVoice

  causes a system crash or a program abort if the defect has voice
  summer set on something else than a properly registered 64 voices
  as Anna. 'Try Catch' is not catch this error. Note that
  Set the voice = CreateObject ("SAPI. SpVoice") fails with the same
  error.

  There is no easy solution to this problem. It may, however, be lower
  64-bit TTS voice concern as more become available.

  First of all, Microsoft should certainly change the TTS box command
  to use the same code as "C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl".

  Second, Microsoft should correct the problem with the way in which
  The statement Visual Basic 'voice = New SpeechLib.SpVoice' functions.
  There is no reason that this cannot have the same capacity as its
  Visual C/C++ counterpart.

  Third, the application programs that use TTS could be written entirely
  in Visual C/C++, the creation of the object of the voice could be in one
  Control ActiveX Visual C or a wrapper might be used to access
  CoCreateInstance.

  Fourth, it is possible to modify the voice so registry entries
  that the ILO 32 voices work with control panel TTS list. It's
  easy to change the registry so that the voices are displayed. He
  is, however, a consistent error message on failure of the audio
  output. TTS registry entries are generally well documented.
  Unfortunately, there are multiple entries for which there no publicly
  documentation available. This in addition to a lack of technical assistance from the
  either third party sellers of TTS or Microsoft voices makes
  Cannot resolve the registry at this time entry.
  These registry problems are not a problem when you use
  'C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl '.

  Fifth, one of the major reasons to be able to change the system
  by default the voice TTS is to offer a choice to vote for programs
  as MapPoint that automatically select the default value of the voice system.
  There is no choice to the user to change the voice of MapPoint.
  He has a key to register MapPoint
  HKEY_CURRENT_USER\Software\Microsoft\MapPoint\17.0\USA\PreferredTTSEngine
  It seems as if the TTS voice can be selected. Unfortunately, he
  There is no documentation for this entry and change the name of voice is not
  override the default value of the voice system.

  Sixthly, the registry entries could be changed by program as well
  the default voice to meet the requirements of
  'Voice = New SpeechLib.SpVoice' only for this one statement. The
  original Scriptures are then replaced before further use of the
  The object of the voice.
  It's far from perfect, but we chose this approach as the
  best current compromise for our programming environment. One
  unfortunate limitation is that Windows 7 64-bit and Windows Server
  2008 R2 use different paths of directory registry TTS and values for
  DefaultTokenId.
  By the way, is an invaluable tool for working with the registry
  Workshop to register for X 64. It can do copy/paste and more
  several other useful registry operations.

  The following code snippet illustrates the method.

  'Created inside of Form_Load and released within Form_Unload.

  Dim WithEvents Voice As SpeechLib.SpVoice
  Dim modifyRegistryFlag As Boolean = False

  "Form_Load code snippet.

  Dim keyName userRoot, subkeys, defaultString, anciennechaine As String
  Dim OSName, OSPlatform, OSVersion As String
  OSName = Trim (My.Computer.Info.OSFullName.ToString)
  OSPlatform = Trim (My.Computer.Info.OSPlatform.ToString)
  OSVersion = Trim (My.Computer.Info.OSVersion.ToString)
  If InStr (1, OSVersion, "6.1") > = 1 Then
  modifyRegistryFlag = True
  If InStr (1, OSName, "Microsoft Windows 7") > = 1 Then
  "Path of the Windows 7 64-bit registry directory
  userRoot = "HKEY_CURRENT_USER".
  subkeys = "Software\Microsoft\Speech\Voices."
  ' Default string DefaultTokenId for Windows 7 64 bit
  defaultString = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Speech\Voices\Tokens\MS-Anna-1033-20-DSK.
  On the other
  If InStr (1, OSName, "Microsoft Windows Server 2008 R2") > = 1 Then
  "Path of the directory of registry for Server 2008 R2
  userRoot = "HKEY_USERS".
  subkeys = '. '. DEFAULT\Software\Microsoft\Speech\Voices ".
  ' Default DefaultTokenId string for Server 2008 R2
  defaultString = "HKEY_CURRENT_USER\SOFTWARE\Microsoft\Speech\Voices\Tokens\MS-Anna-1033-20-DSK.
  End If
  End If
  End If

  keyName = userRoot & "\" & subkeys

  If modifyRegistryFlag = True Then
  ' Retrieve the name of the default voice
  anciennechaine = «»
  Try
  anciennechaine = Registry.GetValue (keyName, "DefaultTokenId", "-1")
  Catch ex As Exception
  MessageBox.Show (ex.) Message.ToString, ' TTS Error: Get current default Voice ", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try

  If anciennechaine = "-1" then
  MessageBox.Show ("No DefaultTokenId", "TTS Error: Get current default Voice", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End If

  ' Name of the default configuration to Anna if she is not the default
  If anciennechaine <> defaultString then
  ' MessageBox.Show (anciennechaine & + "\n" & defaultString).
  Try
  Registry.SetValue (keyName, "DefaultTokenId", defaultString, RegistryValueKind.String)
  Catch ex As Exception
  MessageBox.Show (ex.) Message, "TTS voice of default error: Set", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try
  End If
  End If

  ' Creates the object of the voice
  Try
  Voice = new SpeechLib.SpVoice
  Catch err As Exception
  MessageBox.Show ("Error creating SpeechLib Voice" & vbNewLine & err.) Message, "TTS Error", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try

  If modifyRegistryFlag = True Then
  "Restore default original voice."
  If anciennechaine <> defaultString then
  Try
  Registry.SetValue (keyName, "DefaultTokenId", anciennechaîne, RegistryValueKind.String)
  Catch ex As Exception
  MessageBox.Show (ex.) Message, "voice TTS Error: default restore", MessageBoxButtons.OK, MessageBoxIcon.Error, MessageBoxDefaultButton.Button1)
  Exit Sub
  End Try
  End If
  End If
  Robbie

  I used System.Speech with c# and .NET version 2 (visual studio 2005 - windows forms project) and the same problem occurred with me.

  The solution was change the given target, from "Any CPU" to "X 86". (Project-> properties-> Build).
  Works like a charm too :)

• Problems with white text and transparency from Photoshop to Acrobat

  Hello Adobe community!

  What I do: I have a design that I created in Photoshop CC. This design has a transparent background. I try to save it as a PDF in photoshop, so I am able to open it in Adobe Acrobat Pro XI and print it on a color with only design showing paper

  Question: When I open the PDF file in Acrobat. I see only my white text and a light outline on the part of my design and still not all the rest of the design.

  Then when I print it on paper to color only the text appears (with a black stroke) on paper with my crop marks, I've done in the design of the PS. also when the text becomes transparent for some reason any (showing the color of the paper through the race), even if the text was put to white and the PDF presents the white text printed on colored paper

  Here are my steps:

  1. create Design

  2. save under...

  3. save - under Photoshop PDF

  4 [] as a copy, not controlled

  5. [check] layers, checked

  6 OK

  7. the General settings-

  Adobe PDF preset: [print high quality]

  Standard: no

  Compatibility: Acrobat 9/10 (PDF 1.7 +)

  Preserve Photoshop editing capabilities, verified

  Embed page thumbnails, Unchecked

  Optimize for fast web viewing, Checked

  View the PDF after registration, unchecked

  8 - compression

  Compression: None

  The rest of the settings are default.

  9. open a PDF of the file

  10. printing with the default settings

  11. look at my design massacred in the press

  12 frustration continues

  If for any reason any its like Acrobat of 'ignore' the white in my design? I'm so confused, and I've been at this for hours, through the forum post after post on the forum and it seems that I do everything correctly, but I get anywhere with it.

  I hope that I have added all of the necessary information, it's my first time posting here.

  Any ideas on what I am doing wrong? Would someone mind looking at the file? any help would be much appreciated.

  Note: also, I inverted the whole design makes all black instead of all white people. followed the exact same steps as above, and it printed perfectly. My confusion/frustration continues.

  You wrote:... also when printed on the paper of the color the text become transparent for some reason any (showing the color of the paper through the race), even if the text was put to white and the PDF document shows the text white .

  
  

  You cannot print white using an inkjet or laser because it is not white ink or toner in the printer.

  White was to come from your document that should be white.

  All the presses and printers use CMYK inks or toner.

  What is the definition of white? C = 0, M = 0, Y = 0, K = 0 so not a single of any ink drop is hoisted on paper in an area that is supposed to be white...

  Of course it will show the color of the paper in the areas where there is no ink.

  When you see something white that is printed on paper dark special white Opaque spot on an offset press using a color...

  (there is a model unique inket Epson which can print ink that appears to be white.)  The model is $ 7,000 by the way. ink [White] is $350, all other inks are only $90)

  On the Epson website:

  Ink Epson UltraChrome HDR white introduced an all-new organic hollow resin particle technology, forcing the fire to disperse randomly, producing the illusion of seeing white color.

  Note that even only claims Epson, it produces the illusion of white.

  The only way around this problem is to print on paper white and printed the "paper color" everywhere on paper that doesn't have your elements of design. ".

  
  

  
  

• Not maximized PSD bug/problem - solution [half] as possible.

  Just been checked by images in early 2005 that are part of a large ongoing project and, basically, all files PSD in the first year is missing from LR, despite have no problem being viewed in Bridge.

  At first, I thought it was my duotoned PSD which were the cause of the problem, but it is a problem of "not maximize compatibility" which is to have LR. However, if I go to the PS and resave files with max compatibility enabled [even if changed], the problem still exists.

  Fact some research and others have had same problem but no clear solution with Cs2 + CS4. So, an intuition led me to try and do a "save under" in CS5 instead and voila, thumbnails appear in Path Finder and I can now import into LR.

  The downside is that you can't write an action that includes a simple "Save as return to the same file" that I can tell. Be able to do that would make this possible [and many others] action much more versatile. Present stops "save under" for all other specific file path was chosen during the action was written. Activation of ' save slot for original in the preferences folder is no help either. I missed something or I'll have to do it manually one "save under" on each of 500 + just this first part of a large project. Not to mention the many, many thousands of old PSD files I probably suffer the same bug.

  imajez wrote:

  I tried a basic action that only registered and closed file - it does not work. But if I have this action of the bridge of batch and then do a backup and close during the journey and also save as [which I think is what you suggested], which then gives a warning dialog that suggests adding a "save under" action don't work if a destination is included in the action. Which is what I don't want. But I did anyway. Files now have thumbnails in Path Finder, which would indicate a composite layer has been added, but LR says still preview not available and will not import the files.

  I just did a test... I made an action with a step of Save as. The test images were PSDs I re-recorded without backward compatibility verified. In Lightroom import, these images presented as files without previews which indicate that LR will not be able to import them (I didn't not try actually since I have the warning).

  I ran the action into a bridge called Photoshop batch. I selected test with PSD without the composite files saved records. I selected the option Save and close in the drop destination and then checked the option Override Action "save under" commands checkbox.

  I got the warning "when this option is enabled, the files will be saved in the destination folder that by" save under "steps in the action." If there is no 'Save' or ' Save as ', no files will be saved.

  This is as expected and since step save as a been recorded in the action, you must select this option. I ran the batch on the test and then in LR 3.x Import folder and the PSD had been recorded in the folder with the compatibility has been verified and I could import them into Lightroom.

  So, as far as I know, you should be able to perform an action with a step save money to re - register without backward compatibility of PSD files checked and end with the PSD WITH back verified compatibility for import into Lightroom.

• Equium M50: Problems with white screen at startup-> solved

  I posted a request on this issue on 5 March 2007 that has since been locked.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20992

  For anyone having the same problem, I discovered this is a temperature problem. I live in a place very cold (in China) with no central heating, and now that the weather has warmed up considerably I have no problem starting.

  Thanks for this information. In fact the high temperature could cause some strange behaviors anyway thank you laptop or share this info ;)

• Today my laptop was turnedoff like 4 times till now please suggest some ICC code blue screen problem solution: d1 and 1000007e

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: d1
  BCP1: 0000000000001310
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF88007B9CE98
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\030516-24398-01.dmp
  C:\Users\Sid\AppData\Local\Temp\WER-34445-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88007B63E24
  BCP3: FFFFF8800CEAB6D8
  BCP4: FFFFF8800CEAAF30
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\030516-18798-01.dmp
  C:\Users\Sid\AppData\Local\Temp\WER-34367-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Related to the Extensible Atheros athr.sys wireless device driver.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here