Problem solving - Images

Similar Questions

• You Tube and look at a problem with images

  Hi all

  I wonder if anyone can help me please look at my link as it will be best to see what happens thank you to explain to me.

  I embedded a video YouTube in my portfolio online and also integrated an image, video works well great YouTube Viewer when you view an embedded video image is visible even if the image as the image viewer has images of control to move from one image to another and a button close their operations work very well even though they appear not online but appear in Dreamweaver , I downloaded the entire site, all images and coded files 3 times over the two days, please help me its driving me crazy.

  Link: http://www.anthonymccormickdesigns.com/ColumbianSnow.html

  Thank you

  Thank you for your help Adninjastrator for your help after you explain the problem that I discovered thanks to research if you add '? wmode = opaque"at the end of the Tube URL you can it solve the problem.

  Link to the difficulty: http://maxmorgandesign.com/fix_youtube_iframe_overlay_and_z_index_issues/

  Now, I try to get images of work button controls.

  All problems solved my image folder had a CAPITAL i (Image no image).

  Thanks to you all

• Camera not properly initialize since v. 4 - PROBLEM SOLVED

  I'll preface this with have not only I've done several ' resets all the ', I deleted all the files from camera loaded on the SD card that have been created in v.3 and after 'Reset All' was performed manually via the menu and re configure all my preferences instead of loading old sound of the SD card.

  With that of the road, my problem is 80% of the time that I start the camera with power supply or a battery, the unit freezes at the Sony logo on the submenu. Power must be cut (which has no effect), power removed/disconnected, wait the Sony logo screen disappears and then try to restart. It usually takes 2-4 trys until the camera manages to move to the "Sony" screen and performs full initialization upward. IM dreading the day that this happens on a job and the camera completely fails to start completely. I NEVER had this problem with all previous firmwares. Anyone else having this problem and any advice on how to solve this problem?...

  Side note: my first F5 made the day I brought home from Abel a year ago, but in this case the start of Sony screen wouldn't go away no matter what I or Able tried to do. They talked to Sony and said send it back, fortunately Abel gave me a new on-site and I never knew the question once again. Until now...

  UPDATE: May 30 - problem solved.

  Well it seems that everything has been healed. I went to Sony to Teaneck service yesterday and they replaced "PCB of HIF - 64" or, as we have been referring to him as the SDI card. Also updated the wheel to stop ND, design much better. Engineers, that I talked to had seen cameras having the same problem as me and reinstallation of the map is the apparent cure. Spoke with a Senior technician there for a good 45 minutes a range of topics. Was'nt able to get new information out of him, but he was very helpful and insightful no less. He said that the Japan is aware of the issue of sensor grid that some people have, but they have not been told that the solution will be even.

  Thank you Alister, I'll give them both a go and communicate the results.

• When the error is problem solver, I go to the store?

  When the error is problem solver, I go to the store?

  Please I need help English or Spanish

  If there is an error that you cannot solve at home, then yes the Genius Bar or authorized Service Provider Apple would be a good place to go. What is the error specific are you?

• Problem-solving with HP2311x and ProBook6455b

  Hello

  I have a problem-solving with portable HP2311x and ProBook6455b.

  Maximum resolution is 1600 X 1200

  Current display driver is ATI Mobility Radeon HD 4200

  However, my HP monitor supports the 1920 X 1080.

  I used only the external monitor without using the laptop monitor and the maximum resolution is always to 1600 x 1200.

  I also downloaded the drivers recommended by HP, but it does not solve the issue.

  I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

  When I try to use the AMD Vision Engine Control Center stops unexpectedly

  I have conteacted
  Portrait Displays, Inc..
  http://support.portrait.com

  But they suggested me to contact HP because they were not able to solve my problem.

  Any help will be appreciated.

  Kind regards.

  I understand that you are not able to use the full resolution of the monitor even when the screen of the laptop is out of the question.

  Ensure that the system has the right driver for the monitor found here.

  You can try the support business forums as it appears that the two components are business models.

• problem solved

  problem solved

  Also the advice given above, I also would ensure that you have the latest drivers for touchpad

  http://support.Acer.com/us/en/product/default.aspx?modelId=2192

• Installations of updates of Windows problems solved

  delete it please: problem solved.

  Why did not change your windows update settings to exclude recommended updates installer as are updates important?

  

  Use them,

  

• Windows 10 and Lightroom problems solved.

  Windows 10 and Lightroom problems solved.  I want to update my PC system and install LR 6 (nonCC)

  Any advice before proceeding would be appreciated.

  Thank you.

  Len

  Atul, I thank you for your response. I had read a lot of comments referred to as before posting my query. Not too encouraging - used LR 2/3/4 with operating system previous Windows without problem. Will sit on the fence a little longer on this one.

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• [Problem solved] On the display screen does not not on T60

  I have replace my xp with Vista Business.

  All the drivers are installed. But on the screen display is not working properly. Display nothing when I press the volume high/low/mute key. However, other buttons like Fn + F5, Fn + F3 appear on the screen.

  Someone knows how to fix this?

  Thank you very much.

  problem solved.

  Looks like I need to install a Lenovo System Interface driver. It's just for users of an ATI graphics card and nVidia users don't need.

  Thank you very much.

• Loading dynamic images for Ipa version - problem solved?

  Hi all

  I am facing the same problem reported in the thread below on loading images dynamically in iOS apps:

  http://forums.Adobe.com/thread/868630

  Mode debugging (using the quick method), images can be loaded dynamically in the iPad app. But when the IPA version final app is generated, the images can be loaded dynamically. Just embedded image are displayed.

  Can anyone advise if this problem has been resolved, or if there is no work around for it?

  Thank you

  Inacio.

  Hello

  The following Flex code coverage your use cases? I sent a [email protected] zip file that has a bunch of flex project a png as below.

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark" title = "HomeView" >

  [Bindable]

  "' private var url: String ="http://www.messersmith.name/wordpress/wp-content/png-national-emblem.png"

  ]]>

  Are you by chance using another swf file that provides the url. No external swf cannot be loaded in the release version. So if your code is prepared in such a way that the url of the png is part of another swf file, then you need to refactor your code to a single swf file.

• Problems with images and files.

  After a computer no serious crash a few 6 months or so there are certain details applicable to each image below the icons of my photos turned the black normal script in blue and it is only in a few cases, although it doesn't bother me too much and they can be used, can it be reversed as it is annoying? recently, another point when I load more new photos to a new folder, if some require clock or anticlockwise, I sometimes get this notice of refusal, "cannot rotate this image that this file can be used or opened in another program or file or the file may be read-only." but none of this can be good as I just placed it new pictures in this folder. How to correct these problems?

  Hi J MVP, volunteer

  Thank you very much for the information that informed me of the files compressed, I asked several people about what it could be, but nobody seemed to know, your solution worked a treat, I've heard of file compression but has never had the need to use this method at all for a reason, and it was only caused initially by the computer crash.

  To answer your question above, the source of the images are directly from the camera, a Sony DSLR 550, via a USB cable, they are loaded into the computer, directly in a set end folder, there is reason for the type or the date at which the photos were taken, which is located in the folder "my pictures."

  Then I get to work with it on Photoshop, after I saw what I want to keep or discard, it's when I have a few photos activate in order to view properly, this problem only comes to occur for the first time as yesterday.

  At the same time I could turn several photos at once 3 or 4 + at a time, but it will now allow me only to make an at once it does not account for the rest, too, sometimes in the past when I turned a picture turned it the image on the screen but the icon remained impassive (this can happen sometimes at 3 or 4 in a row) When I then performed the same maneuver to the next image in the sequence, the previous icon also then becomes his main image returns to its initial position, but this happens only rarely.

  Only when I turn it dose it then right and eventually become stable, these odd little blips, I put in place with for some time, but this last problem, the fact that I can now have a soft image to look at, but can not turn as the computer says 'No', I must confess a again becomes quite painful.

  I've never confessed to be a computer buff, I want only to work on the photos for me and my pleasure to families and our web site, but when things like this crop up I admit that I have no idea where to start and so the reason I am looking for assistance.

  Thanks much again for all your help.

  Best regards

  Mahoganyoak

  ====================================
  Nice camera...

  OK... with regard to the question of the rotation... I don't know exactly
  answer, but will provide some info that may help you solve
  the question. I'm sorry that the message is so long but here
  is a lot of things that could be involved. I'm sure you
  know your system well enough to forget useless
  steps: o)

  Since you're using Photoshop to rotate your images...
  It is possible that the solution might be found in Photoshop
  Supported.

  Adobe PhotoShop help and Support
  http://www.Adobe.com/support/Photoshop/

  Personally I do not download photos via a USB cable...
  on the one hand, it irrigates the batteries from the camera. But the
  main reason is that corruption can develop in the photos
  If the batteries are low when the download is triggered.
  An example of how this happens download photos
  immediately after a session of photos long when batteries
  are low. I suggest to use an internal or external
  Media Player.

  Given that the question of the rotation recently developed... make one
  Restoration of the system Mode without failure for a time before the
  problem began could be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system to a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Also... the regular system maintenance can improve
  some of the issues. Maintenance of sufficient free space on your
  hard drive is also useful. I keep my free to at least 50%.

  Empty your temporary Internet files folder.

  (260897) how to remove the content of the
  Folder Temporary Internet Files
  http://support.Microsoft.com/?kbid=260897

  Run Disk Cleanup, error checking and
  It is a good idea to defragment regularly schedule.

  (310312) description of the disk cleanup
  Tool in Windows XP
  http://support.Microsoft.com/?kbid=310312

  (315265) how to perform disk error checking
  in Windows XP
  http://support.Microsoft.com/?kbid=315265
  (check two boxes... "automatically repair the file.
  System errors' and ' search and try to.
  recovery of bad sectors"), the utility will run
  the next time you restart your computer.
  (run check several times until it finds errors
  no error)

  (314848) how to defragment your drive
  Volumes of disk in Windows XP
  http://support.Microsoft.com/?kbid=314848

  Sometimes Thumbs.db files can be damaged...
  personally, I have remove and disable their creation.

  What is thumbs.db, and can I delete it?
  http://ask-Leo.com/what_is_thumbsdb_and_can_i_delete_it.html

  Shut down Windows to save the cache of thumbnails (THUMBS. DB)
  http://www.annoyances.org/exec/show/article03-204

  What is the thumbs.db file and how it remove?
  http://www.pchell.com/support/thumbsdb.shtml

  Next... it can be interesting to try to run the following command:

  Open an image in Windows Picture and Fax Viewer...

  Hold your Ctrl key and close the Viewer... (X on the title bar)

  You should see a dialog box stating:

  "Any rotation warnings that you have deleted."
  zero prior and can reappear when you
  Rotate an image. »

  Now, you may need to run the following command:

  Reach... Start / run and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll

  (Yes, the space after the 2 and the)
  After the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll
  Try to turn your photos...

  To reset the rotation dialog box... try the following...

  Open an image in Windows Picture and Fax Viewer...

  Hold your Ctrl key and close the Viewer... (X on the title bar)

  You should see a dialog box stating:

  "Any rotation warnings that you have deleted."
  zero prior and can reappear when you
  Rotate an image. »

  Now, you may need to run the following command:

  Reach... Start / run and type
  (or copy and paste):

  "" REGSVR32 SHIMGVW. "." DLL.
  (without the quotes) (Yes, it is)
  a space between 2 and S)

  Click on... Ok.

  A dialog box should include the following:

  "DllRegisterServer in SHIMGVW. DLL succeeded.

  Try to turn your photos...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Inspiron 1525 - problems with image restore factory (need help!)

  Hi all
   
  I have a problem with my Dell Inspiron 1525, I can not solve... so please help me!
   
  My Windows Vista Home Edition crashed while installing an update and now could not start more (I always get this bad blue screen during startup), so I would like to repair my laptop using the Dell factory image.
   
  I'm doing... .with related problems
   
  1. I press F8 during startup, but there is no entry "Dell factory image restore" or something like that (I even tried each one entry but nothing factory imagine restoration).
   
  2. by starting with a Ubuntu live cd, I can see that there is a partition that contains (among other files and folders) that image (:\dell\image\factory.wim) and a Tools folder where there are files imagex.exe and pcrestore.exe
   
  3 one... Using a pen drive usb bootable containing a bootable back version, I Prime the system. I also put in the usb pen, ntfspro.exe in order to read the ntfs partition
  b. I went in D:\Tools and run this command:
  > PCRestore.exe --> but I received an error message indicating that this program cannot be run in dos mode
  c. so I tried this other person (I've read here in the Forum):

  > imagex/apply c:\dell\image\factory.wim 1 c:\ --> but I got the same error as above, it is impossible to run this program in dos mode

   

  4. in addition (and I think it's weird), I tried to boot with the dvd operating system shipped by Dell with the laptop: loading at startup of Windows, but just after the progress bar (green) appears at the bottom of the screen, it blocks showing again this bad blue screen!

   

   

  Now I don't know what I can do!

   

   

  .. .Please help me!

   

  Is there a way to restore the laptop with the Dell factory image?

   

  Thank you

  Orlando

  orlando1,

  Thank you for using the Dell Community Forum.

  When you press F8 and the menu, choose the option which reads 'Repair your computer' and follow the menu to restore the system.
  

  This utility formats the partition of hard drive to the operating system before you restore the original image. This means data on that partition is deleted and cannot be retrieved.

  If you create a second partition with a third-party utility, Dell Factory Image Restore remains unchanged until the partition of the image is not deleted.

• Several X201T problems solved - sleep problems, lock issues, multiple monitors / dock issues

  Hi, guys.

  Immediately after obtaining my Tablet last summer, I installed Win 7 Enterprise, our company holds a license for a microsoft SA customer.  Win 7 Enterprise has all the features of Ultimate edition, including Bitlocker, I needed.  I even restored the machine using discs I got from our Lenovo account manager and had the same problems as the image of the company.  My Tablet has the touch screen feature.

  I had the following problems with the Tablet, which are now resolved:

  Trackpad spoil randomly

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-trackpad-issues-randomly-tries-to...

  The tablet on the first day, there's a new trackpad.  The party has had more than 4 weeks to arrive, but it fixed the problem once it was replaced.  I tried 1 billion software solutions (different drivers, settings, etc...) and blew a lot of time, so if you have this problem, get your replaced trackpad.

  External monitor did not work with docking station

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-multi-monitor-issue-with-ultrabas...
  

  The solution was to use an adapter displayport to DVI to my Dell 24 "monitor.  The Displayport takes a long time to synchronize with the monitor that he thinks it isn't getting a signal, and the laptop turns off the display shortly after having tried to activate it.  In this case most of the time.  With the help of an adapter DVI worked very well.  I found myself propping my tablet in portrait mode with a cheap portable stand in a big box office supply store so I can have the OneNote upward on the tablet screen throughout the day.

  The final two problems have been solved with the application of a patch of Windows:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74813

  Thanks RP68

  Laptop won't sleep or shut

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-won-t-shut-down-hard-disk-light-f...

  At the end of each computer session, I had to shut down windows with one hand on the power button.  It was extremely disruptive.

  Laptop won't lock, will not close the session cannot bring up the Ctrl-Alt-Del screen

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-Laptops/X201T-tablet-can-t-lock-the-computer-or...

  It was awful.  As I sometimes ran programs in respect of the whole of the high network privileges and have a sensitive Inbox, it meant that I had to basically hold the power to stop the machine when I go to the toilet.

  Why no system update?

  Lenovo - the fact that this fix does not appear as an update required in Lenovo System Update caused me a lot of grief.  If you have a technical reason why it was available on the site, I would like to hear about it.  The case, please make your tablet customers a favor and put this in the system update.  There is absolutely no doubt in my mind that the fix has solved all of my most serious problems, despite a description of Microsoft that doesn't seem to match the symptoms.

  I'm a happy guy now that all my stuff works.  A bad computer can really make your life difficult.

  @deathbots,

  Thanks for sharing the steps you have taken to solve the problem, I will drop a comment to the TVSU on this topic to see if it is possible to implement this go ahead.

  Thanks again
  JMT

• Problem copying images to Microsoft Word

  Hello

  I evaluate your new RoboHelp 10.0, and I have a question about copying images to Microsoft Word.
  If I copy a unique image of the word and paste it in the HR it works, but if I copy several (for example an entire document), it does not paste images (or pasta finally only the text selected)
  Y at - it a bug, or intentionally, he acts like this?

  Thank you.

  I finally found the cause of this problem.

  In Word, open the document you sent me and go to file > Options > advanced > Web Options.

  You will see an option rely on VML...

  Uncheck the box that and save.

  Now, copy and paste.

  In my view, the setting is per document.

  Please confirm this solves the problem on your side.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge