Problem starting Portege 7200 - stops running and the light flashes

I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

Thanks for your help.

Hello

Have you tried to run the notebook without the docking station?
If this isn't the case, then try it.
Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

But generally, if the LED flashes then this means that there is a hardware malfunction.
The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

Good luck

Tags: Toshiba

Similar Questions

  • After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

    After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

    Hi Pops1148,

    ·         Is the question not confined with updated Microsoft Office?

    Follow the suggestions below for a possible solution:

    Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

     

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339

    Method 2: Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Startand type cmd in the box start the search .

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompt, the following line and press ENTER:

    sfc/scannow

    Reference:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

     

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

     

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

     

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

    Let us know if that helps.

  • On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »

    I am running Win 7 Pro.  On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll.  The specified module could not be found. »

    The error msg box provides an OK button. After clicking this button, everything seems to work well.

    FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.

    I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all.  Anyone know what program calls for this file? How can I get rid of this problem?   Any suggestions would be welcome.

    Thank you.  f* address email is removed from the privacy *

    Disabled under msconfig.exe startup items are moved to this location in the registry:

    HKEY_LOCAL_MACHINE Tools\MSConfig
    To permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:
    1. Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
    2. Create a System Restore Point.
    3. Start the computer with the CD in repair and check if the above Restore Point is visible.
    4. Start normally.
    5. Remove the offending registry key.
    Please mark my answer as 'Response' in this thread so that it can be closed.
  • Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

    Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

    The phone is new (5 days). It's a wedding?

    If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

    Restore your device from an iCloud or iTunes backup - Apple Support

    Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

  • I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

    I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

    Gary

    The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

    The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

    When you have done this, place you and double click on the correct catalog and LR should then start OK.

  • Problems using with a 40TL968B TV and the Blu ray BDX4350 FPT-AG02G 3D glasses

    Hello

    I just set up a new player to Tv and BDX4350 40TL968B.

    I decided to invest in two or three pairs of glasses of the FPT-AG02G.

    When you try to view a 3D disc I'm having a problem where the shutter affect on continue glass cutting.

    What is happening on the two pairs of glasses and they both had a full charge using the USB cable supplied.

    When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

    If I move then if the lenses are very close to the IR output of the TV then the affect of filling may start but stop after period again.

    The TV IR Transmitter is not blocked by anything whatsoever, and niether is the receiver the most on the glasses.

    Everyone knows that before or have any ideas how to overcome the problem?

    Thank you, Ian.

    > When I turn on the light flashes every few seconds and if I get close to the TV, the 3-d effect begins on the glasses. This will continue for perhaps 5 to 10 seconds, where the function of components and the image appears is 3D, before stopping and I find myself watching the blurry image of TV again.

    I think you should check if the battery of 3D glasses is OK.

    I found a nice page of FAQ from Toshiba that can be useful in the future. :
    https://ask.Toshiba.co.UK/help/en-UK/3D-TV/?page=1

  • Satellite Pro 4600: sometimes applications stop running with the new RAM

    Hi all

    I was wondering if anyone out there can shed some light on my problem. I've recently upgraded for an extra 256 MB on my Satellite Pro 4600. The laptop showed the increase in RAM. Since the installation, for some reason any after running for awhile applications (this varies between 10 minutes to a few hours like laptop start up), applications stop running. I can not open new applications. When I restart, I can run the applications in my laptop as usual again.

    I received my offtek RAM. Manufacturer part number is the same as specified in the manual of my laptop.

    Please someone has an idea?

    Mocha

    Hello

    Please check the number of PA of the 256 MB chip, the number of PA is properly PA3005U - 1 M 12.

    By

  • Everything on my XP request too what program to run and the absolotly nothing works

    Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?

    more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the

    Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer

    Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff

    no idea on how to solve this problem would be insanely useful thanks

    Windows XP file Association problems
    http://www.dougknox.com/XP/file_assoc.htm
    EXE file Association problem (association of default restore for EXE files)
    LNK (shortcut) file Association Fix (restores default shortcut behavior)
    HTM/HTML Associations (Restore the default associations for htm/html files) and/or
    URL file Association problem (restores default associations for URL - Internet shortcuts)
    COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
    Difficulty of file Association (restore the default associations for BAT files)
    CAB File Association problem (restore the default associations for CAB files)
    CPL file Association problem (restore the default associations for CPL files)
    COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
    Directory Extension difficulty (restores default HKCR\Directory)
    EML file Association problem (default restorations for the EML files)
    EXE file Association problem (association of default restore for EXE files)
    File Association problem (restore the default associations for file folders)
    HLP file Association problem (default restore for HLP files associations)
    HTM/HTML Associations (Restore the default associations for htm/html files)
    ICO file Association problem (restore the default association for ico files)
    INF file Association problem (restore the default binding for the INF files)
    Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
    Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
    LNK (shortcut) file Association Fix (restores default shortcut behavior)
    MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
    MSC file Association problem (default restore for MSC files associations)
    MSI File Association problem (default restore for MSI files associations)
    MSP File Association problem (default restore for MSP files associations)
    REG file Association problem (default restore for REG files associations)
    SCF file Association difficulty (default restore for SCF files associations)
    RCS File Association problem (default restore for SCR files associations)
    TXT file Association problem (default restore for files TXT associations)
    TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
    URL file Association problem (restores default associations for URL - Internet shortcuts)
    VBS file Association problem (restores default associations for VBS files)
    ZIP file Association problem (restores default associations for ZIP - file REG folders)

  • Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

    Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

    Signature of the problem:
    Problem event name: PnPDeviceProblemCode
    Architecture: x 86
    Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
    Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
    PnP problem code: 0000002B
    Driver name: nvlddmkm.sys
    Driver version: 8.17.13.142
    Driver date: 15/05/2012
    OS version: 6.0.6001.2.1.0.768.2
    Locale ID: 1033

    Hi, Senga,

    Start > right click on computer

    Select manage

    Click on continue in the UAC window

    Click on Device Manager

    Click on the + sign next to the device

    Right click on driver and select rollback

    If the cancellation is dimmed, select uninstall

    Close Device Manager

    Back to zero computer and Windows will reinstall the driver

    Go to the manufacturer website, download the updated driver to update and save it to the desktop

    Double-click the .exe file to install

    You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

  • Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

    Original title: Hello,.

    my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

    Hello Ewazn,

    ·         You get this error message only when you launch Microsoft Office applications or launch any application?

    You can view the article in the Microsoft Knowledge Base and check if it helps.

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Please elaborate on the question so that we can help you in a better way.

  • My gadgets stop working and the work of whont

    I have windows 7 and my gadgets took to the geek squd and thay are a wast of money I need help let me know as soon as possible got a presatashin in 2 weeks to help 12/01/11 Please

    You can try to use punctuation.
     
    It is a group of Windows Vista so it's for Vista 32 bit.
     
    Close the sidebar, click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type
     

    Taskkill /f /im sidebar.exe
    regsvr32 scrrun.dll
    regsvr32 jscript.dll
    regsvr32 msxml3.dll
    regsvr32 atl.dll
    regsvr32 "%ProgramFiles%\Windows Sidebar\sbdrop.dll".
    regsvr32 "%ProgramFiles%\Windows Sidebar\wlsrvc.dll".

    then click on start - all programs - accessories - run and type
    '%userprofile%\AppData\Local\Microsoft\Windows sidebar' and delete or rename Settings.ini

    Restart the sidebar (start - all programs - Accessories - Windows Sidebar).


    --
    .
    --
    "tecknerd101" wrote in message News: ac3f656b-7e4c-46a2-bb82-1ca12c0b90e3...

    > I have windows 7 and my gadgets took to the geek squd and thay are a wast of money I need help let me know as soon as possible got a presatashin in 2 weeks to help 12/01/11 Please

  • I use windows 7 and auto start program has stopped working and I can't find a way to recover.

    I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

    [Moved from comments]

    Probably tell you autoplay?

    Control Panel > programs > default Prorams > Change AutoPlay settings

    Or

    In the search programs and files, enter, AutoPlay

  • Driver IGFX stopped responding and the screen is now healed

    Hello!

    I have a problem with games on my Inspiron 1525. I found subjects with this problem but can't find any idea how to solve this problem.

    "Driver Igfx stopped responding and the screen has now recovered" - this error pops up when I play 3D games.

    Video: Mobile Intel® 965 Express Chipset Family.

    Latest drivers from dell.com are installed: 7.14.10.1409.

    Of the intel.com, I downloaded driver v7.14.10.1472 but cannot install it.

    How can I solve this problem?

    p.s. DirectX 10 installed.


  • After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

    After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

    Original title: old start bar

    Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

  • The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

    The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open


    Hi Marcelo,

    You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

    Kind regards

    Navdeep Pandey

Maybe you are looking for