Problem stopping construction of the central loop of three-loop vi.

Similar Questions

• Problem stopping and restarting the computer

  Hello

  I searched for so long for a solution, until I decided to post a question here.

  Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

  Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

  It's extremely frustrating because I have two options:

  Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

  or

  Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

  Here is my contact information for the computer and all the...

  Lenovo G400

  (Standard plug)
  500 GB WD hard drive

  Windows 7 ENTERPRISE

  If you need more details let me know, so I can help you.

  Hope to hear something soon!

  MBT

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  Please use the restart configuration.  This will reboot your computer 3 times then save your work

• El Capitan stop built into the optical drive to work?

  Hi people

  I hear and read that El Capitan stop construction in the optical drive to work? I don't know if it's true, and other bugs. I remember when I upgraded to Yosemite this happened to my mac mini, and the super drive was not recognized. However, it was fixed. Although I used to be able to run when any player with the mavericks, but Yosemite has changed all that.

  In any case I had to go to Yosemite, and I'm not sure whether for now, if it's going to ruin my drive and other things. I have a 2012 end pro MacBook. Everyone has problems, or advice to share, or stick to Yosemite.

  Sorry for this Question, it's just that I'm not sure on replacement after hearing this.

  Concerning

  Cap

  N ° as always do a backup in case the new version does not meet expectations. If you are happy stick with Yosemite.

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• Stop the multiple loop without delay to the cRIO

  Hi all

  the VI in cRIO has a large loop, it contains 4 small while in parallel to the work loop. In every little while, they have a stacked with a lot of frame sequence.
  I want to stop everything with only one STOP button on my host live. But when I press STOP, I have to wait for all the small loops completed their charge and finally the big one can stop. Is there any solution to immediately end all?

  Thank you very much

  d4nvjpl0ng4n wrote:

  the VI in cRIO has a large loop, it contains 4 small while in parallel to the work loop. In every little while, they have a stacked with a lot of frame sequence.
  I want to stop everything with only one STOP button on my host live. But when I press STOP, I have to wait for all the small loops completed their charge and finally the big one can stop. Is there any solution to immediately end all?

  1. you should not have the large loop.  Which is just to add unnecessary complexity.

  2. you hit the major problem with the Structures of stacked sequence: everything must go before it is complete.  The solution is to use a State Machine.

• Stop and start the task in while loop

  I try to start and stop an output meter (creates pulsed output) in a while loop and I don't know how this is possible. I have a while loop running who is taking measures from a digital compass. If my title is within acceptable limits, the outputs of the meter (2 of them to turn to the left and right) must be turned off. If the title is out of the acceptable range, let say too far to the right, I want to start one of my outings of the counter to activate the object to the left. The issue I am having is that if I put the block 'Start the task' in the while loop the system will try to start each iteration of the loop, even if it is already on. I don't know if there is a problem, but it does not appear effective from a programming perspective. I remember reading somewhere that stop and start tasks can really slow a loop. Any suggestions?

  I actually just to understand it. If you use some if statements and the "fact of task is" block you can make it work.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Programming of a conditional FOR the timing of the STOP button on the loops

  I have a conditional FOR loop with a STOP button, however, the nature of LabVIEW data flow, the stop button is now being questioned at some point before the end of the loop. A control not having no entry, I can't connect to the last operation of a single iteration of the loop to trigger the vote on the STOP command, and I prefer not to use a flat sequence just for the power button if I can avoid it. I've considered using a structure of the event, but I don't want to force the loop to wait that the stop button to be pressed, I want just the loop to EXIT, * IF * the stop button is pressed... but I want the stop button to be questioned at the end of the loop, so if the user presses the button stop at any time in the loop , at the end of the iteration, the loop will end... that makes sense? At present, given that the stop button is called once at some arbitrary during the iteration of the loop time, if the user presses the stop button after he is questioned, the loop must run an extra iteration, and I don't want that to happen.

  ... in any case, I guess I'm looking for a more elegant way to implement that having to use a flat sequence just for the stop button.

  Sorry, but you'll have to use a sequence structure.  This is why they are there.  Sometimes they have their purposes.  Here is how I would handle it.

  

• How to stop the While loop in the Structure of the event with the same button?

  

  Hello

  I have a problem. I want to use a single control to activate an event in a structure of the event and the same control to end a while loop in this case.

  It is possible to use 2 controls to do this, but I need to be alone.

  Thank you

  You should NEVER place while loops inside the case of the event, and it is never necessary to do. Think about it: all you have to do is spin the code. You can easily use the outside while loop for everything. Simply place the code of the loop internal (without the inner loop) inside the case of delay and manipulate the time-out period between a pending finished and the infinite (-1), depending on the State of the Boolean value.

  A very simple example (LV 8.0)

• For loop does not or will not stop according to the toggle switch

  This is the VI I work with joint. The VI is a bit long, but the two loops on the left side are loops that have problems. When the program works and I hit the switch 'START of CYCLE' rocking the loop simply does not work. However, when I toggle switch on before the start of the program, the loop will run the way it is supposed to, but never shuts off when the switch is turned OFF.  Any help is appreciated. Thank you.

  billko wrote:

  James.Morris wrote:

  Good, so as I was saying before the left of right data flow, so things on the right don't peut/don't do nothing until things on the left ends.

  I've seen you say this twice now, and it is not true.  Data flow from the output of a node to the input of another.  This means "from left to right" because it was designed that way.  If you had two subVIs, 'A' and 'B', no cable together and 'B' to the right of 'A', it does NOT follow that 'A' will run before 'B '.  If, for some silly reason, you had 'B' exits on the left and the 'A' entries on the right, you could connect the outputs 'B' to 'A' and the data would be sent to the right left.

  But I'm fairly certain that I have misunderstood the information you were trying to convey?  (It wouldn't be the first time, believe me!)

  Ah, point taken, I'll have to adjust the way in which I explain the data flow, stream of best practices not only. It is difficult to describe the flow of data to a beginner without using the directions. I was just trying to convey that the Boolean value that it has a cable upwards is providing data for both the first structure of matter and the main While, loop which means they expect both for the info of the Boolean value. If he makes the request to wait for the user to click on the Boolean value, then the loop will wait too long.

  I think that the data stream is one of the biggest problems new users seem to fight with and this thread is an example of this. EMART can make this code work, even if it's a mess, but I think it is obtained when the additions of code got on immediately to the point where he needs a little more experience help to understand how do to encorporate more functionality without messing up what already exists.

• Table 1 d in the while loop problem

  Hello world

  I searched this problem in the forum, but seems only some positions quite didn't answer.

  I'm stuck by saving the data in a while loop.

  I have a while loop, within which there are two exits in each iteration, I want to add to a table, and then after the while loop is completed, I want to combine these two tables in a 2D array (since the release of them must be a pair in my case).

  I tried 'Build array' and 'transpose array' and 'write in spreadsheet' element set, which maintains concerns me is how simply to add the result in a 1 d table during each iteration, these 2 outputs are in digital format, which prevent to directly create a table for it.

  Any idea is appreciated,

  Thank you

  Chen Kunsheng

  Here are some other ways to insert.

  It may be useful

• Ghost of the sent emails from my email using my account, I guess that what needs to be done to stop or solve the problem?

  Ghost of emails sent from my email address. sent from my address book full. What does take to stop or solve the problem?

  Two things may apply here.  The first is that, in fact, someone stole your credentials because you signed in to your mailbox using a public hotspot.  If you can still access your mailbox with a web browser, on a private network (such as your home network) and change your password to something complex and unguessable, using at least 10 characters, the characters being a combination of uppercase and lowercase letters, numbers, punctuation or special characters.  Who must thwart those who have stolen credentials, denying them access to your mailbox.

  The second thing that can apply is that your box to the letters is safe, but your address was hacked, which means that spammers are using their own mailing envelopes but by specifying your e-mail as well as the mailing address, something that is very easy to do something that happens to almost everyone who allows their address be visible in a public forum (such as Facebook or an online discussion group).  This case if it is a serious problem and not a threat to you.  Since spammers change mailing addresses frequently, they will move to use yours.

  You can usually tell the difference between these cases because in the first case, you would probably lose access to your mailbox because the spammer changed your credentials based on himself.  It's a problem that you need to address with your e-mail service provider.   You can also see evidence of the compromise because targeted friends can send you copies of the messages they received, and you will be able to confirm from the message turned headers to your e-mail service provider's network.  The latter manifests mainly because you will begin to get NDRs to addresses that you don't recognize or are clearly fake.  In this case, just remove and stop worrying.  They will stop after a while.  Even still, it is always advisable to change the passwords to your services online all the months to protect against the compromise.  Tools like lastpass.com are beneficial to help keep you straight.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  I'm having the problem of local connection on my Dell PC with Vista. ISP is Verizon FIOS. FiOS representative told me to disable Ipv6 and the problem stops. Is this correct?

  original title: local area connection problem

  Hello

  1. What is the exact problem you are facing with local connection?

  2. how many computers have you plugged into the network?

  Please provide the information of network event logs to help you best.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  In the meantime, run the troubleshooter mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer

  Original thread: runn dll
  I get on this on my vista desktop
  Error loading \3\lxcgtime.dll
  the specified module could not trading

  and this on my computer vista laptop
  Windows Defender
  faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer. \

  and I would like to know how to play mkv video media Center (win 7 not vista)

  Hello

   
   
  Did you do changes on the computer before the show?
  
  Method 1:
  You can perform these steps manually to start the Windows defender and check:
  a. Click Start.
  b. in "Start Search", type services.msc and then right-clicking the name of "services" in the list of programs.
  c. Select "Run as Administrator".
  d. look for windows defender and right click and select start.
  
  Method 2:
  You can also view provided articles knowledge base and check:
  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849
  Error message when you run a beta version of Windows Defender: "failed to initialize: 0x800106ba»
  http://support.Microsoft.com/kb/930522
   

• OS5 stops Javascript when the backlight is off or time > 10 seconds - is this a problem for the WebWorks applications?

  I read that the OS5 browser stops all scripts once the backlight turns off, or if the script takes longer than 10 seconds to run. The problem is that the scripts will automatically restart (!). I really hope this isn't the case for the WebWorks applications, I can't have the app stop working if the backlight turns off. If the general development of BB moves towards HTML5 and JS and expects to have success, this kind of problem cannot exist.

  WebWorks for OS5 doing?

  No, this time-out does not occur for applications WebWorks... only for pages running in the browser.