Problem: The device is not cleared
Dear Sirs,
I had a problem when take the link online and it has refused to give an online interface device.
One of my devices, what is Rosemount TT0644, is always shown "NIF_ERR_DEVICE_NOT-CLEARED" in the shot:
So, I'm trying to find if there are some settings to refuse my changes to the unit.
I put "Not locked" in WRITE_LOOK of the resource pack.
Unfortunately, it seems not to be the right way to solve the problem because my change of tag still does not work.
She seems to be the same error.
Is there someone to help me? Thank you very much.
Hi aarontseng,
1. are you able to download a program (with only its own FB) in the device in question with the clear option of devices (the download Configuration)?
2. Please check if the SD profile you have selected is correct.
Tags: NI Products
Similar Questions
-
Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you
Hello
1. have you checked the problem by plugging the headset to another computer?2. it worked before?3. What are you talking about ""device"is not connected?I suggest you to connect to another computer and check.Also check if the device is compatible with Windows 7.Reference:Windows 7 Compatibility CenterIf it's compatible, perform the methods belowIf it is not compatible, see the following articles:What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsMethod 1: Run the audio Troubleshooter and see if it helps.Open the audio playback troubleshooting utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-TroubleshooterMethod 2:Run the Fixit described in the article and perform the steps:No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsSee also:Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsI hope this helps. -
Hello
So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.
Y at - it no information or help to clear this message?
We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.
The user says if 10 can be made to work well, then we can go back to 7 or 8.
Please notify.
Thank you for your time.
Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.
-
Question of Wlan Qosmio F50-108 - the device may not be present
Hello.
I have a problem with my wirreles driver.
When I try to install, it gorge yourself me the following error message: "the device may not be present or may have been ejected / disconnected from the system." Insert or reinsert now. »Hope that this problem can be solved :)
To my knowledge, this message is displayed during the installation of the wrong drivers or is not compatible
Have you chosen the right WLan driver?
As far as I know, the laptop uses Intel 5100AGN wireless network card and the Wlan driver can be found here also:
http://APS2.toshiba-tro.de/WLAN/Check it!
-
Original title: I need a market to resolve the problem remove the instrument.
How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.
I can't know what "all patches" you've tried, but:
Make sure that the system restore does not monitor the external drive. SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max. Make a right click my computer and select properties then the System Restore tab to configure SR.
Make sure that the Indexing Service is turned off (at least for the external drive). To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp. For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc
There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
http://safelyremove.com/index.html Among other features:The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.
-
Text on the screen is not clear
I have a new Dell Vista pc runiing. I have a LCD Ultrsharp DEll monitor. ATI @MB graphics card, the resolution is set to 1280 x 1024, everything seems OK, but any text on the screen is not clear. HE's a little fuzzy. How can I fix it?
Hi Amber321,
How long have you been faced with his problem?
You make changes to the computer until this problem occurred?I recommend you set the screen resolution and other settings. To do this follow the link below:
http://windowshelp.Microsoft.com/Windows/en-us/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx
You can also check out the links below:
Ways to improve display quality
http://windowshelp.Microsoft.com/Windows/en-us/help/132c1dab-6da1-47cf-96af-8f00eceaf6f51033.mspx
If the links above do not work, you can check out the link below which will be useful:
Troubleshoot monitor and video card
http://windowshelp.Microsoft.com/Windows/en-us/help/2582c444-448C-4fb5-ba0c-d753f88d64791033.mspx
I hope this information is useful.
Please let us know if you need further assistance.
Concerning
Rehman - Microsoft Support -
The device does not seem to be pluged?
Please which hat an en ansewr thisWhen I used the Microsoft fix it I get this answer "the device does not appear to be pluged?
Hi ArtanLala,
1 are you facing sound problems?
2 what Microsoft Fixit did you run?
3. using external speakers?
If you are facing problems with the sound, you can check with headphones and see if the sound works fine.
-
m facing a problem with hub 4 ports usb of my... When I connect usb hub my with my usb keyboard and mouse, and then the lights of the suite to get devices but they doesnot work... and the error message shows... I checked in Device Manager and I got the message details which are given below.
Device status:
This device is disabled because the firmware of the device did not give him the necessary resources. (Code 29)
driver version:
6.1.7601.17514
Please help me... Thank you.
Hello
In the Device Manager - right click on the device and Uninstall - when complete reboot.
Check in the Device Manager to see if the device re-installed. If it isn't action - Scan for
hardware changes.Also check the BIOS - Setup/settings - often F2 for system start - make sure that the USB port
is activated. Check with Support from the manufacturer of the system/motherboard, their documentation online.
and ask in their forums.How to fix error Code 29
http://pcsupport.about.com/od/errorc/a/code-29-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Dear,
I am desperately looking for a solution for my specific problem how access my NAS.
I have a hard drive from Western Digital NAS (Book Live) which worked fine until now. Yet, I just changed my internet provider and I now have a new Fritzbox 6360. Now, I can not access the hard disk of the commune of programs in Windows. I contacted two suppliers already, but without success. I think I have some incorrect settings in my Windows 7, 64 bit. This is the situation:
-NAS is still working with my old Fritzbox, for testing that I went back-> ok
-I can access the NAS via the dashboard or a TwonkyServer-> ok
-When I access it via Windows Explorer, I wonder is to give my credentials (which don't work) or I get the error message: the device is not configured to accept connections on port 'files and printers sharing (SMB).
-J' changed my IP address (dynamic even static) and connections, password-> without success.
-J' tried SFC with the result that found no violation of integrity. -> ok.
Any idea?
Can you please turn off the NAS, unplug the cable and Ethernet cable? Wait about 2 minutes then plug all the cables back in. Any security program or firewall to this computer? Try disabling it for now.
You have another PC or laptop which has Windows 7/8 and try to access the NAS?
You have a smartphone or a Tablet and download an application for the WD NAS and then try to access files.
-
Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.
What should I do next
Hello
- Are you referring to the NEC USB Floppy Driver?
- You try to format floppy disks?
- Was - this earlier work, if so, did the chnages on the computer before this problem?
If it worked, I suggest the following methods and check the status of the issue.
Method 1:
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
Error "the device is not ready" to the Windows command prompt when you access a key USB from VMware
The host and guest are running Win 7. Version of VMware is 11.1.3.
The guest computer, Windows Explorer displays the USB and I can open its files, etc.
However, when I use the Windows command prompt to access the USB of the client, I get error "the device is not ready".
In order to get the guest system memory image, the application must be run from the USB as an administrator.
Help, please! Thank you!!
I already found the answer. Win 7 had not installed USB 3.0 controllers. I downloaded several executables from Intel and Lenovo sites, but they does not work because the system only has not meet the specifications, etc.. Then I discovered that a USB 2.0 stick had any problems. So, I use 2.0 for this virtual machine. Thank you!
-
The device does not appear in the menu generator of folio
Hello
I use a new Samsung Galaxy Note 10.1 (2014 edition). The device does not appear in the menu designer folio when I try to do a test. You have an idea?
My computer: MAC OS 10.8.5 with InDesign CS6 8.0.2
Samsung Galaxy Note Note 10.1 2014 edition, 4.3 Android
Thank you
(You can answer in french or English)
Thank you Bob for you answers.
My problem is solved.
The advanced options menu is hidden on the new tablets Galaxy Note 10.1.
To bring up this menu go to the menu "about the device" and press the number of the model 7 times.
The advanced options menu appears. In this menu, you need to turn on USB debugging.
Fact.
-
I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:
"device target error - the device is not suitable for use.
I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .
System configration:
Win vista 32 bit.
Processor: Amd athlon 64 dual core 2.60 GHz.
RAM: 3 GB
Graphics card: nvidia geforce 6150 is.
Model number of camcorder: JVC gz-hm320.
Format: .mts
Image size: 1920/1080
Frame rate: 29.97.
Please look at this problem.
Concerning
Manoj Khati
Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001
See you soon,.
--
Neale
Insanity is hereditary, get you your children -
my iphone 6s is stolen I had activated find my iphone, but now the device does not appear on my icloud find my iphone please suggest what to do.
If your iPhone, iPad or iPod touch is lost or stolen - Apple supports
-
ATRIX HD: delete the mail on the device, but not server
How can I delete messages on the device, but not on the server?
@ Cloud
If you try installation 'auto', then you will not get this option. Try the manual installation option, and you can select the option to keep the email on the server. Please note that this option is available for the POP3 e-mail account. With IMAP and Exchange sync is always maintained. POP is "only a download" Protocol. Try that and let us know how that works. Thank you.
Maybe you are looking for
-
Windows XP unknown password request blocking me startup
Today, when I went to start my computer, I was asked for a password before Windows (Windows XP Home Edition) came. I've never used a password and this computer it not used by someone else. I can't do it. Any advice on how to get rid of the passwor
-
WRT1900AC plan of tuning?
My WRT1900AC has replaced an E3000 as the local router downstream modem Arris cable on the Comcast network. With the replacement came double my download and performance measures for download which I attribute not to changes in "real" but the differe
-
KB2607712 - cannot install Windows updates
original title: Re: KB2607712 I canceled KB2607712. The Green band that crosses, froze in place, now I can't receive updates from M/S. What should I do? Thank you
-
replacement of the network card on compaq presario cq60-430sa
Hi, I have a compaq presario cq60-430sa with an atheros b, g network card pre installed, just improved to a Wireless N Router and want to enjoy higher speeds offered, can someone tell me which cards will be or used to adapt Thank you Castro
-
my C drive is full how to get drive D to pick up where C left.
Original title: CHANGE of CAR My computer has factory installed C and D records, my C drive is full how to get drive D to pick up where C left. Thank you