Problem to scan fingerprints is preventing the connection on Satellite Pro U200

Similar Questions

• Thin blue line on the display on Satellite Pro U200

  My laptop screen has suddenly started to show a thin blue line that goes up and down the screen, so that it does not interfere with the details of the screen it is very annoying and I d rather try to get rid of it.

  Has anyone seen this happen before?

  My first idea was a display problem, but this problem could be linked to the fault of the graphics card too.

  So how can I test?
  Well, you can connect an external monitor to the laptop.
  If the same thin line will appear on the external display, a graphics card problem may be possible.

  In both cases, the hardware must be replaced. I think that it s time for the guy to ASP.

• Update of the BIOS for Satellite Pro U200 work do not

  BIOS 3.50 update does not work. This is for VISTA or WIN XP PRO?

  One of the users has the same problem expericenced. replys appreciated.

  [Edited by: admin on April 22, 2007 20:40]

  Hello

  The BIOS 3, 50-VICTORY on the Toshiba page is OS independent.
  I guess that the XP and Vista OS are available for this unit, so that the update should work on both s BONES.
  By the way; You should check the Description of the Toshiba BIOS update before upgrading the BIOS.

  But why you want to update the BIOS? If everything works correctly, then I recommend not updated the BIOS

• Installation operating system using the recovery disc - Satellite Pro U200

  I bought just a U200 and took to rebuild so I understand how it works.

  I have to reinstall from the recovery disk, I was wondering when the recover, there is a question on partitioning, I would partition a drive C and D, machine is when I would do, the question is asked to the amount of space to be allocated to the partition, if allotted jemti 20 GB I'd get a 20 GB C drive and a D drive on the 40 GB remaining?

  Hello

  You are right. If you choose to 20 GB, it will create a 20 GB partition and this partition will be installed the operating system. When you start the second partition (40GB) preinstalled OS will be not visible and you must create a logical partition.

  You can do if you start Computer Management click Disk Management. Click with the right button of the mouse on the partition marked black and choose the option to create the logical drive. Follow the instructions and the D partition will be created.

  If you have any other questions, please write again.

• Satellite Pro U200 - how to access the BIOS?

  Hello

  HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I checked the forum and you should try to press the ESC key.

  It work? ;)

  Welcome them

• Problem to scan fingerprints

  Hello world

  I have a Fujitsu Lifebook U745 with a biometric fingerpint scanner that is the image, use on Windows 7.

  My problem is that when I want to use the scanner to record my fingerprints in order for use to log into Windows, it seems that I have not all the software to use biometric devices in Windows, from in the display to the next screen:

  

  I translate from Italian:

  "No application installed to manage the selected fingerprint reader.

  The computer don't havea program to manage the data of fngerprint with the fingerprint reader. "To use the scanner, you will need a program from the producer of the computer (if the drive is part of the computer) or the producer to scan fingerprints."

  The screen I see when I'm at my scanner propriety is the following:

  

  Please help me. Thank you.

  Hello

  The error message that you receive on the resolution of the problems means that you need to update the driver for this device. To use the fingerprint on your device reader, we suggest to contact your manufacturer and request an update for the driver.

  Let us know how it goes.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• There was a problem that caused some parts of the Connection Wizard Windows Live ID must be disabled. How can I fix it?

  There was a problem that caused some parts of the Connection Wizard Windows Live ID must be disabled.  How to fix this?

  Hi everyone - I finally got my problem fixed.  By chance I stumbled on Omni Tech Support and after several tries, they fixed it for me.  I don't know how they did it.  I'm sorry that I can't provide the information

  For you.

  Thank you all for trying to help me.

• "" My internet connection is constantly down and back on the error "negotiating IPsec year failure prevents the connection.

  Original title: The IPsec negotiation failure prevents the connection

  My internet connection is constantly visitor drop-off and restarted, and when I troubleshoot I get this message "the IPsec negotiation failure prevents the connection." I don't use VPN or anything so I have no idea what it means. I restarted the router several times. Any other ideas?

  Hello

  1. you are using a wired or a wireless connection?

  2. If it works well before?

  3 did you changes to the computer before the show?

  Method 1: Reset the router and see if that helps.

  Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  Method 2: Uninstall and reinstall the NIC drivers and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Get the error message when you try an upgrade to Vista on Satellite Pro U200

  Hello
  When I upgraded my Satellite Pro U200 to Vista (original CD using Toshiba), I couldn't install Config Free program. When I want to install it, I get the message 'the installation image is not corrcet' ideas for this problem?

  Thank you

  Hello

  Maybe you need to download again the configfree for your machine from here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Just download and try to install it. I can't imagine that she won´t, I ve updated work my A100 some time ago and everything works fine.
  BTW. I downloaded all the stuff from the link above.

  Please give some feedback

  Greetings

• Error message "failed to load Tosrfcom" on the Satellite Pro U200

  Hello

  I have laptop Toshiba Satellite PRO U200 with pre-installed VISTA professional
  After restarting, even for the first time, having the following error in the event log:

  Log name: System
  Source: Service Control Manager
  Date: 07.07.2007 01:29:15
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The next (s) starting or starting system could not load:
  Tosrfcom

  by:

  http://www.EventID.NET/

  Can't find a solution!

  someone knows how to fix this?

  Hey Buddy,

  did you have already recovered the system (installed completely new from scratch)? If it is already done, then do it and see if the same error again.
  Maybe it s just a software problem and can be solved by reinstalling the operating system.

  Welcome them

• Replacing the battery on Satellite Pro P100

  Hi can anyone recommend a reputable provider in Britain of the batteries for Satellite Pro P100, is a PA3480U-1BRS 6000mAh. ?

  People like DABS.com tried but they are always out of stock.

  As usual, there are plenty of weird sites found on Google but I have never heard of them and they offer for most non-Toshiba clones which I do not know if they are all good or even compatible.

  Ideally, I'll try to find a genuine Toshiba battery if I can

  Do Toshiba to provide directly?
  Thanks to all those who can help you

  Graham

  AFAIK, you can't order directly in battery Toshiba but each service provider authorized in the United Kingdom can get the original for you battery.
  I recommend checking the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  You can find the list of all FSA in the United Kingdom. Connect with some of them and look for information on replacing the battery, costs and delivery times.

  Bye and good luck!

• Problems after Satellite Pro U200 has been accidentally deleted

  Hey,.

  I keep having problems with my laptop Toshiba Satellite pro U200. Problems started the laptop was accidentally deleted.
  I will try to describe here:

  Laptop started making noise like buzz... all the time.
  and it's really annoying. Never, it was so loud.
  Another strange thing, it is that we continue to be: after about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all windows just freezes. You can not move the mouse can not do anything, even ctrl + alt + del doesn't work, so I have to push turn off button for a few seconds to turn off the laptop.

  I don't know what I have to do?
  is this a hardware problem? If that's what should I change?
  If anyone has had similar problem please share what you know with me!

  Thank you very much!

  > After about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all the windows just freezes
  I think there could be something wrong with the cooling module.
  Is that your fall, the computer laptop and, consequently, the cooling module could malfunction and might makes a strange noise.

  Usually, if don t cooling modules to work properly, the temperature rises to a higher level and finally the laptop begins to freeze due to a higher internal temperature.

  In fact, this is just my personal opinion and I can't say with certainty what s wrong.
  I think you should ask a technician for laptop for a short audit

  What I can say is that it really sounds like a hardware problem

• How to connect by Satellite Pro A300-1LW to TV - only monitors VGA port available

  I want to connect my Satellite Pro A300 1LW to the TV to watch DVDs and videos on the internet.
  There is only a single VGA output.

  I have this connected to the input VGA on TV (Sony Bravia LCD TV) and it displays the start-up screens such as the BIOS, Windows startup screen password but fails when the user login screen.

  The television then shows a message indicating "signal not supported.
  Adjust the PC output '.

  Is the complete list of available interfaces:

  1 x DC-in
  1 x external monitor (this is the port that I use)
  1 x RJ-11
  1 x RJ-45
  1 x i.Link (IEEE 1394)®
  1 x external microphone
  1 headphone (stereo)
  1 x SP/DIF (optical) shared with headphone jack
  1 x 5-in-1 Bridge Media slot (supports SD ^ TM ^ memory cards up to 16 GB)
  Stick® up to 256 MB, Memory Stick Pro ^ TM ^ up to 2 GB, MultiMedia Card ^ TM ^ to the top
  to 2 GB and xD-Picture Card ^ TM ^ up to 2 GB)
  1 (shared with a USB port) x eSATA
  4 (2 left, 2 right) x USB 2.0 (USB Sleep-and-Charge of support)

  Have you tested when laptop is not connected and that Vista is fully charged?
  I mean start your laptop and wait for Vista to be fully charged. Cannot connect to the TV, then use the FN + F5 key combination to have the image on the TV.

  It works correctly?

• USB mouse will not be in service to initialize the top when used through Dynadock on Satellite Pro U200

  The USB mouse not is won't boot on initialize top when used through Dynadock on Satellite Pro U200. If the mouse is reinstalled on the Dynadock it works fine. I use a Kensington Valuoptical USB mouse. I tried the alternative kensington mouse and had the same problem. Can someone tell how to fix this?

  Hi Jeremy

  Unfortunately I don't have a solution to your problem, but it can also be a technical limitation. I'm also interesting to buy this docking station and I would like to know if there is the same problem with memory external HDD or USB sticks.