problem updating the ini file ini file

Similar Questions

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Need help updated the VMX file on several Virtual Machine

  All,

  Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

  Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

  However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

  Here's the line I need added:

  Devices.hotplug = "false".

  Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

  Get-viserver - < Server > - < user > - < password >

  $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
  $viview | {foreach-object
  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
  $vmConfigSpec.Tools.afterPowerOn = 'True '.
  $vmConfigSpec.Tools.afterResume = 'True '.
  $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
  $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
  $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
  $_. ReconfigVM ($vmConfigSpec)
  }

  The exact script can be found in Disable HotPlug

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive.

  It is an intermittent problem, as the excellent files, powerpoint will corrupt network drive. Any help will be much appreciated.

  To avoid this, I'm making sure that files are not left open so much because we run backup incremental three times in a week.

  Files is not very high - about - 2 MB

  Some screenshots are inserted

  Thank you

  Amit

  http://answers.Microsoft.com/en-us/Office/Forum/office_xp-Excel?tab=unanswered&TM=1373425932359

  above is office xp, excel forum you might be better off poster in this forum that many people are familiar with excel and powerpoint.

• Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

  There is no such command in Acrobat JS. Maybe it's the name of an item in menu or function, that someone wrote.

• problem in the zip file and tutorial. can someone remove or correct...

  Hi experts jdev,.
  
  use jdev11.1.1.5.0.
  
  When I am new on this webservice. I followed this tutorial
  http://docs.Oracle.com/CD/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
  
  wsdl URL link when using that wsdl.
  
  throws an error.
  What is the reason, said john. OK at the second post of the thread.
  Consume a Web Service from a Web Page
  
  so if I change the wsdl means somethings should be changed in steps tutorial.
  
  If any newbie crossing this tutorials feels very difficult to work. so I can change the wsdl url link and these steps.
  
  and another thing, as I installed 11.1.2.0 and download zip file in this tutorial and I run up the same error.
  
  so. problem in the zip file and tutorial. any person may file or correct...
  
  I think it's the right place to say this. Otherwise, re - direct me.

  It's yours if you want to close. I ping the folks at Oracle.

• Deleted data file update the control file?

  Hello!
  
  I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
  I have not updated the database control file, now I get an error message:
  
  ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
  ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."
  
  How update the control file to get rid of this error?
  
  I use Windows and exit DB 10.2.0.2.
  
  Thank you very much for your help!
  
  Christian

  I think that I made a mistake of reading here.
  Looks like you have deleted a TMP file.

  You then have to join v$ tablespace with v$ tempfile in the statement.

  It's a 10 G (or higher) database?

  Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

  HTH
  FJFranken

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• don't update the template files

  Hello
  I just finished (it never really did? ) a site and have a problem with the template files. Previously, I had downloaded a couple of test patterns. That worked well for but are now obsolete. I have downloaded by ftp, the two replacement files. New files don't appear - just the 'old' remained. Then, I deleted the two old model files and confirmed that they were gone. After that, I downloaded one of the new template files. He is introduced but was identical to the original file. So the question is, how can I get the old models replaced by the new ones?
  Thanks for any help.
  

  worked really well
  It's a bit complicated to implement, but be very, very handy to know and do.
  Thank you much for the help ThinkInk

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Impossible to update the two files (KB3071756 & KB3060716)

  Hello

  I am running Windows 7 x 64 bit.

  Today I have a lot of updates to the window.  All files are updated successfully (KB3079757, KB2952664, etc.), except two (KB3071756 & KB3060716).  The error code given is 80073701

  After that, I tried to use the patch tool window to explore the problem and the report is attached.  According the report, I still don't know where is the problem.

  I'm not a computer programmer, so no matter which could provides an advanced method very clear and right to solve this problem?

  Thank you.

  

  I can't promise you that it will work for other people having this problem.  I tried to install these updates one at a time, and then go over the CBS.log file in C:\Windows \Logs\CBS to try to find what was not.  In the field of the errors I've seen another update mentioned.

  An update was KB2922229 and the other was KB2984976.   In my view, that updates KB3071756 and KB3060716 replaced others of an earlier era, including last month.    I uninstalled the KB2922229 and the KB2984976, restarted and again the object of updates.  He said the same two updates are available, KB3071756 and KB3060716.  I went ahead with the installation and they have successfully installed.

  Your situation may be caused by different problems.  If you are not familiar with examine previous newspapers or uninstallation of updates, no not this.  If you see the same information I've seen, then he just may work for you too.

  I realize that there are a lot of noise KB in my text above.   So in the end as follows:

  Uninstall/remove the KB2922229 and the KB2984976, restart, and then look for the updates.  Install the 2 day of this month, and if you have the same problem I did, it allows to install.

• Update the text file app/native/assets/data/in the workspace?

  I'm having a problem with updting a compressed file that is updated via a Web service.

  It is pretty simple what I'm doing. first wait for the answer

  QNetworkReply * response = qobject_cast(sender());

  check the data, etc.

  location of the file is "app/native/assets/data/somefilename.txt".

  QFile file (type);
  If (file.exists ()) {}

  leader. Open(QIODevice::WriteOnly |) QIODevice::Text);
  QTextStream out (&file);)
  off<>

  leader. Close();

  }

  It works fine on my local machine when I run it on my Z30 by momentics.

  But once I have add to my BES server and pull down on my workspace, the file is not updated. I can see the file updated in the application is correct the only thing is that the file not updated text.  From what I see the "app/native/assets/data / ' is read-only.

  My question is how update you text files that were packaged in the instalation of the app "app/native/assets/data / '?

  Thanks in advance

  It is not possible, assets / is read only when the application is deployed to the device, it is only readwrite on Simulator. data / folder can be used instead.

  Optionally, the file may initially active resident / and can be manually copied to data / on the first start of the application. After that it can be updated in the data / folder.

• Problem with the PSD file in Illustrator

  G ' Day,.

  My problem is when I place the PSD file in illustrator, it opens menu 'Option to import Photoshop' ,
  that allows me to choose either:
  (1) photoshop layers convert to objects (or)
  (2) flatten layers into a single image photoshop

  all other options are greyed out (which means that I can't select them)

  The 2 options above will embed the image in illustrator, so when I update in photoshop, they will not automatically update.

  I don't have this problem in the past (which means that I do not understand this menu when I use the function of the place), but it is just poped last week.
  But when I open OLD illustrator files that have PSD images embeded no, I am able to edit the PSD and Illustrator will be automatically updated.

  Please help this is really frustrating to keep investment PSD files every time when I change.

  Thank you!

  

  I hope you saw the link check the option above what I wanted, if not selected it would prompt you with a dialog box that you encounter.