Problem using multiple declarations

Similar Questions

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• MacBook Pro 5.5 crashes when you use multiple applications

  Then my macbook pro 5,5 I upgraded to snow leopard at el captian started planting after that I updated when you use multiple applications (virtual dj 7.0.4 safari 9.1 and the version of microsoft word 2011 14.4.2).)

  I removed the old hdd and put in a ssd 250 GB and a new battery with the snow leopard a long time ago, before I upgraded to the new operating system. It seems to me that what is blocking it is intensive use the safari app and another intensive resources such as virtual dj application.

  I have reset pram/vram and uses firefox now...

  the computer and the new el capitan are beautiful, I really feel like im going to get a lot out of this operating system, and it gave new life to my computer, but the crash problem when using multiple applications is too often. Can I submit some reports if necessary kernel panic?

  Anonymous UUID:

  9C21D886-B7E1-F5A6-463E-8CBCF325C9D9

  Sam May 21 18:31:15 2016

  Panic report *.

  panic (cpu 0 0xffffff80115ce40a appellant): Kernel trap at 0xffffff801192a3b3, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0XFFFFEF802CCD9C40 CR3: 0X000000001320B000 CR4: 0 X 0000000000002660

  RAX: 0 X 0000000000000000, RBX: 0XFFFFFF802B945780 RCX: 0XFFFFEF802CCD9C08 RDX: 0 X 0000000000000000

  RER: 0XFFFFFF911BE53D00, RBP: 0XFFFFFF911BE53D20, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF802B8FEAF0

  R8: 0 X 0000000000000000, R9: 0 X 0000000000000003, R10: 0 X 0000000000000000, R11: 0 X 0000000000000026

  R12: 0XFFFFFF802B945780, R13: 0 X 0000000000000000, R14: 0XFFFFFF911BE53E18 R15: 0XFFFFFF802B8FEAF0

  RFL: 0 X 0000000000010282, RIP: 0XFFFFFF801192A3B3, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffef802ccd9c40, error code: 0 x 0000000000000000, CPU error: 0x0, PL: 0

  MP = 0xffffff8022e00000, phys = 0x1367a000, prev (0 x 7: 0 x 11313000 - 0 x 11400000)

  VP = 0xffffff802b945780, phys = 0x1bd310780, prev (0xb: 0xffffc000 - 0 x 100000000)

  0xffffff8022dff000: oQAAAMsAAAAAAQAAqWwqIgAAAAAZMSk2QACp3wEAIjAAAAAAgAAAAFDw0ND1AAEACwSEgAoDAQNYXJr c9QABAAsMhMAKDwUD0FD5 / PUAAQALDETACg8FA + DQ9fz1AAEACwxEwAIDAQPQ0PX89QABAAcMhIAJAwE DoECKzPUAAQAPDISACgMBA1Bw1vz1AAEADwxEwAoDAQNwUPbc9QABAA8MhIAJAwEDoCCq3OUAAQALDIS ABQ8FA9DQudz1AAEABwxEwAoDAQNYXNbc9QABAAsMRMAKAwEDUFDW3PUAAQAPDETACQMBA9Dwuvz1AAE ADwSEwAoDAQPQ8Obc5QABAAsMhMAJAwED0ODW/AjJ5SKA / / / OB3SEQEAAQBjb20uYXBwbGUuZmxvdy1 kaXZlcgAAAgAAIAAAYG6GEbBzhhHQ8N8i5DsAAO + rd5BTEwACKiaIyrhQFcYNdERSLVmIoD / / / 8IAfI iAAAABwoAAACQb5YRAPnGIu ++ rd4QNdERKMlmIggC8iIoed8iQPbGIhA10REIA/IiuHffIogkcSogNdE RCA7yIgi2ZiKA / / / AAAABgUAAACA + MYicIMAAHySAADvvq3eyLZmIoD / / / 8IBfIiAgAAAwMAAAAIDPI iAAAAAgIAAABotmYigP / / / wMAAAMEAAAAQPjGInCFAABwgwAAcIgAAHBQAADvvq3eKuFAVxA10RGotWY igP / / / 8D4xiLvvq3eCADyIgAAAAgLAAAAEE +. WERg10REISfQiAAAACQwAAAABAAAJDQAAAED5xiLvvq3 eCLNmIghH9CIAAAAEDgAAAJQkcSoq4UBXGDXREaiyZiIAAAAFDwAAAIkkcSrgDuAg7o4JvgAO6u4LS0B A7uDuDACwAADgBOTkDO4OALCwAADgBITkDgze7gCwsABA4ASEDt7vDgCwsABAwOQE7/6/DkDA5ATuAg4 NsAAAC + QEhOzuDw4NsAAAC + QEJOyyDg4C9OT + 4OcOAAAAAABLBITs7uwODg2wAAALBITk7gcODQ4AAAt LBITsfu7n7u4ODktA5Ow + 4A0OALBLQOAA7tPuA7CwAADo0BEA/ycAOPADjz8CoIMdwAzzP AIQBqABwA Y8sxTDvLMUw7gDNAWAQBKAAkAswzAgDMAbQWADIATcACAPgMOBLQVAGgAagDAAvMM4AgAGBgFgBCA8QU OAtgWAIABLAAIECAA4AhgGwEgAAhAB0AAECQADgLYFgAIAAIn4AzQFgEgDDioE4AA6KQzD + AIABgYBYA YgAAnD8/I8wzyPAMOAgAWAOgBBhjzlCMP8yzzDOAIABgBIIkAgPwPDgLYBjgBAA4U6KQDDgLYFgAIAgo Q6XwDAAAA

  0xffffff8022e00000: IUMAABAU4CIAAID / / / 8EALi80BEIAID / / / 8MABp7AAAQAP / / / 8kAPBixxEoAID / / / 8sAOBVxhEwAID ///80ALCUoS1AAID///9EAKBXlCtIAID///9MAAAPlCtQAID///9UAIDJ6CJYAID///9cAGAA4CJoAID ///9sAADQgARwAAAA3YB0ABAAAAB8AAAQAACEAAAAEACIAEBXoAOQAHXTCQOYAHXZCAOgAMt9lwCoAD5 XoAOwAHXZCAO4AAIAAAHAABEAAADEAGhmcwDUAC8AAADkAC9kZXbkBC9kaXPoBGswczLsBAEAAADkCAg A6SL4CID / / / 8CAAAAAIACQAAAAIECQABAAAICQABAAAMCQAAQAAQCQAAQAAUCQMAAAAYCQACAAAcCSA AAAAgCQEAAAAkCRIOAABACdh4AwBICRIOAABQCYh + AwBYCQAAACFoCf / / / + ECVDK6CKICYD / / / + MCQE AAACYCQEAAACsCUAy4yLQCYD / / / UCQIAAADwCf / / / 8sCkgK4CJQCoD / / / 9UClgK4CJgCoD / / / 9kCmg K4CJwCoD / / / 90CgAQAAB4CgABAACECgAA

  0xffffff8022e01000: cAAAAIMAAACbAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AJBweH4AAAAAAAAACAACIBChIiEwKD2r/EgbMAAmkEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwMAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHh8Jx80AJgAAAggAKDQhExR8Fj 8iUdIxJZ9pd9V/5 X/Vf9W/1 X/Vf9l/5r/Vf + V / wAAAgD / DwAAAAAAIf / / / 8A9sYiAgAAAACg0ySA / / / AADgIkABAACgg8YRoFbGEbDE6CLAMyErUMzoImAU4CIAEBAEABAQAOi/dSJkZXZmL2RldgAAAgD/DwA A6xQEAAAAACH / / / PwAAAIA + 4yIwzOgidOOkA1BzgwA42SaCAJGyAADfG4JAkoMALN8bgqBugwCwkIM AkKyNAKCNgwDgUIgAoE + IACBsiACAgogAAISIAMwAAAzu7u7uDgMOALDgwwAADOzg4w4O7jPuM + 7/u7 u / + 7/7u7 + 7 l/uVe5V7t7l3u7d7t3u3e7d7v3u/R7v7u7oLuEu7iLuIg4CDg4gAAgCAQD + P4DDASBozTk Bc4AAICAEQB8SbQ44DwgAN5DDDj3w / w04fysMOKDACCJg /. g04QIEFB5DAAg0gwgsdAMIIJpACCy8gQw0 4sIMPAUDAAQRgQQ8r4EIMNHCDDj0A

  Backtrace (CPU 0), frame: return address

  0xffffff911be53990: 0xffffff80114dab12

  0xffffff911be53a10: 0xffffff80115ce40a

  0xffffff911be53bf0: 0xffffff80115ec273

  0xffffff911be53c10: 0xffffff801192a3b3

  0xffffff911be53d20: 0xffffff80116f634b

  0xffffff911be53dd0: 0xffffff8011927993

  0xffffff911be53ec0: 0xffffff801170f81d

  0xffffff911be53ee0: 0xffffff80116f99e4

  0xffffff911be53f50: 0xffffff80117047d7

  0xffffff911be53f60: 0xffffff8011a27fa1

  0xffffff911be53fb0: 0xffffff80115eca76

  Name of the BSD corresponding to the current thread process: launchd

  Mac OS version:

  15E65

  Kernel version:

  15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

  Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

  Slide kernel:

  0 x 0000000011200000

  Text of core base: 0xffffff8011400000

  Text __HIB base: 0xffffff8011300000

  Name of system model: MacBookPro5, 5 (Mac-F2268AC8)

  Availability of the system in nanoseconds: 3602233285655

  last load kext to 2442165091688: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)

  Finally unloaded kext to 2529727624548: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f93f64000 size 32768)

  kexts responsible:

  com Apple.filesystems.smbfs 3.0.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.21.18

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDA 274.7

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

  com.apple.driver.AppleSMCLMU 208

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleMikeyDriver 274.7

  com.apple.driver.AppleLPC 3.1

  com.apple.GeForceTesla 10.0.0

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  com.apple.driver.AppleIRController 327,5

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AirPort.Brcm4331 800.20.24

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleAHCIPort 3.1.8

  com Apple.nvenet 2.0.22

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBOHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.7

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.AppleHDAController 274.7

  com.apple.iokit.IOHDAFamily 274.7

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IOBluetoothFamily 4.4.4f4

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleUSBMultitouch 250,5

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.iokit.IO80211Family 1110.26

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOFireWireFamily 4.6.0

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.driver.usb.AppleUSBOHCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  2.2.9 com.apple.driver.NVSMU

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  System profile:

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.4.4f4 17685, 3 services, 18 aircraft, 1 incoming serial ports

  Crush Bus:

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5, -.

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1 333 MHz, 0x02B5,--

  USB device: USB Bus

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB Bus

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  USB device: USB 2.0 Bus

  USB device: ISight built-in

  USB device: USB 2.0 Bus

  USB Device: Card reader

  Serial ATA Device: Samsung 850 EVO 250 GB, GB 250,06 SSD

  Serial ATA Device: OPTIARC DVD RW AD - 5960S

  Model: MacBookPro5, 5, MBP55.00AC.B03 of BootROM, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, MSC 1.47f2

  Network service: Wi - Fi, AirPort, en1

  Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB

  The spare memory that is installed does not respect the specifications of your model (1067 MHz SDRAM.) Please reinstall the original memory, or install the new memory of the correct type.

  Any vendor deemed RAM will be a web form where you can select the Mac model and be directed to the compatible parts.

• web pages of Windows vista won't load using multiple browsers.

  Windows Vista, 32-bit.
  Card mother with an AMD processor - built Gigabyte in 2009.

  Computer has worked for a few years, however, now, he can not complete the loading of most web pages.

  Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
  Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.

  Ping/tracert works very well.
  If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
  Windows Update, seems to work very well.

  Download files from a web page, does not work.

  The computer is currently connected via Ethernet (not wireless).
  We have tried this on two different networks, so it is not associated with ISP.

  We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.

  We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).

  I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.

  I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.

  I do not think that it will fix a Vista startup repair, but I advise him to try to do.

  I'm looking for any other suggestions in addition to switch to Linux full time.

  Thank you!

  Hello

  Method 1:

  I suggest to perform a restore of the system and check if it helps.

  What is a system restore.

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Reset TCP/IP.

  Follow the link below and reset the winsock TCP/IP settings and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  http://support.Microsoft.com/kb/811259

  Let us know if it helps.

• Win 7 crashes when you use multiple wifi connections.

  Hi Shinmilla,

  I have a problem with Win 7. How did it crash the system when you use multiple wifi connections. How can I stop this from happening?

  Thank you.

  Hi Triode888,
   
  It is not recommended to have multiple Wifi connections since signals can be contradictory and therefore it crashes.
  You can't have several active Wifi connections at the same time.
   
  Also, I suspect it might be caused by your network wireless itself. It could be automatically connected to a network of 'death '. So please check that your wireless network is disabled or no if you do not use.
   
  You have installed VMware or Virtual PC?
   
  If so, these programs will create a new network - please open the network and sharing Center and disable these additional networks.
  
  1. open the network and sharing Center page in the control panel.
   
  2 confirm that it says multi-network right under the icon in the Middle, like the screenshot above.
   
  3. click on the link customize to the right of the first illustrated network, directly under the Internet icon, to display the window set the network location:
   
  4. move the window set the network location away, but let him open. (You'll need it in a minute, but at a time where it is otherwise inaccessible.)
   
  5. back on the network and sharing Center page, click on the link manage network connections (in the left task pane).
   
  6. in the network connections window, select the network adapter through which you get your Internet connection. (The views drop-down list, select Details; you want probably said something like network, unidentified in the status column.)
   
  7. click on disable this device network above (next to the big red X) button. Wait a few seconds for the chart on the network and sharing Center page to reflect the change.
   
  8. return to step #3 set network location window, and click on the merge or remove link network down locations.
   
  9. Despite Vista earlier assertion that he detected "multi-network," you will see probably only a single network in the window of merge or delete network locations:
   
  10. turn highlighted the only participant and then click on remove. (If there is more than one, you can delete all.)
   
  11. When you are finished, close the merge or delete network locations, and then close the window set the network location.
   
  12 return to the network connections window and with the adapter disabled network always highlighted the #6 step, click the option activate this device network (next to the big orange arrow) button.
   
  13. after 10-15 seconds of delay, your Internet connection should work now, signified by the absense of the treacherous of entries multiple networks in the network and sharing Center page:
   
  For more reference in http://social.answers.microsoft.com/Forums/en-US/w7network/thread/272b55ce-fb9a-423b-9a9a-8299f853cc29 look
   
  Aziz Nadeem - Microsoft Support

• Problem with variable declaration

  I'm developing a multiuser Flash application, using the smartfox Server 2.0, but I'll have a problem with defining/declaration of a variable/object/table and then access. I am trying to set the "curMap" (be it a variable, the matrix, the object, everything that works) within the following function, like the array returned by the server, "resObj". It works fine as long as I only call 'curMap' within this function (see you in line: r_txt.text = curMap ;)) However whenever I try to call the "curMap" on the coding of the image outside the function, it returns under the indefinite form or usually nothing.  Any ideas on how to properly / attribute this? I tried various things (such as _root, _global or setting the var "curMap" outside of the function) with no luck.

  Here is my Code:

  smartfox.onExtensionResponse = function (resObj:Object, type: String)
  {
  If (type is 'xml')
  {
  If (resObj._cmd is "getMap")
  {
  curMap = resObj.db [0];
  r_txt. Text = curMap;
  } Else if (resObj._cmd == "getSurr") {}
  surrMap = resObj.db;
  b_txt. Text = surrMap [0];
  }
  }
  }

  Thank you

  Make sure that you are trying to access this variable before it is defined.  That is to say, which resembles an asynchronous function for the code of this function will probably run AFTER the code that appears in the lines that follow the body of the function.

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• problems using two monitors. both screens show the same thing.

  I use the NVIDIA GeForce4 MX integrated graphics.  I need to use the monitors at the same time, but with a capacity for dragging from one monitor to the wire to the other.

  Hi Denise,

  See http://support.microsoft.com/kb/307873 to learn how to configure and use multiple monitors in Windows XP.

  To view the same desktop in multiple Monitors (Extending the displays)

  -In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  -Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  Hope this information helps.  Let us know if you have any questions.

• I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  Have you followed all the steps like that?

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

  It is an alternative.

  http://explore.live.com/Windows-Live-Family-Safety?OS=other

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

  If this post answers your question, click mark as answer .

• How to show the multiple declaration for an application

  How to show the multiple declaration for an application

  Thanks for your suggestions...

  Looking at the javadocs you can only save an indicator by application. You will need to do three separate applications and package them as an If you want three different indicators to be visible at a time. Or change the flag that (or which group) of the indicators you want to display.

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• unknown problem using WMP 12 no sound when played the song in the folder but has sound when he played in the player

  Hi all

  I have a weird problem using WMP (Windows Media Player v12).  When I double-click a song of in my library, the trail seems to play, but didn't have all the sounds.

  However, if I hover over the same path and then click Preview, the pop-up, the track plays with sound.

  When the track (s) do not play, all indications show the way to correctly play through of progress ' Now Playing ' screen, but no sound.

  In the past, when I clicked on any MP3 file, he would play using WMP.  Now, when I click on an MP3 file, it brings just "Now Playing" and looks LIKE he plays, but no sound.

  I have looked & looked for clues as to why it may be of WMP, but I can't understand the problem.  I also searched the Web for 'day' drivers in the Win System Manager, but Win says that pilots are "up to date".

  I have rebuilt the DB Library (twice) by removing the DB files in from WMP to a procedure in a WMP support forum. I also went to check the audio device in Device Mgr Win (mine is one on one). Everything seemed ok.  I also changed the devices to "Win by default" to what I think my onboard audio device is called.  I thought that that can do, but it's not.

  I was struggling with this since the day of the year.  Please help me solve this problem!

  Here is a link to my system features:

  http://Speccy.Piriform.com/results/0JAQshtlODwFxgwHeGb4rfq

  Hi, Pie,

  Welcome to the Microsoft community.

  Appreciate your efforts to try to resolve the problem that you have set so far. I guess that is not a problem with the driver that ultimately, the songs are playable using the media player. It could be a corrupted in Windows Media Player framework that is causing the problem. Let's run the Windows Media Player troubleshooting utility that resets all parameters to the player. Check out the link to do so:

  http://Windows.Microsoft.com/en-za/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Please let us know the results.

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Problem using the REST API by wavemaker

  Hello

  I have a problem using other api with wavemaker. When I do a query GET with the RESTClientin FireFox, everything is fine for example:

  get https://XXX.XXX.XXX.XXX:8281 / vco/api/result:
  

  
  Status Code: 200 OK
  Cache-Control: private
  Content-Type: application/xhtml+xml;charset=UTF-8
  Date: Sun, 06 Apr 2014 16:50:04 GMT
  Expires: Thu, 01 Jan 1970 00:00:00 UTC
  Server: Apache-Coyote/1.1
  Transfer-Encoding: chunked
  

  But when I try to connect to the same url using wavemaker I recive: the answer is not in a valid XML Format.

  I use Orchestrator 5.5 and far as I could see the token is no longer required in the header. Anyone know why I get this error message?

  Thank you!

  

  Well half a day looking, then finally I thought to it:

  The header should be: accept: application/xml