Problem using the serial port with windows 7

Hello

I have a modem of SIM cards (used to update remote controller of the electronic gate) that connects to my computer via the serieal port (COM1).

The modem comes with its own piece of software that worked fine on my old computer with windows 7 (I had a similar problem, but then I just need to update the driver).

I now have a new computer and I am unable to connect using the modem (I think I'm using the latest drivers for the serial port).

Is it possible that I need an older version? If so, how can I get a?

My motherboard is a GIGABYTE H81M-D2V.

Any ideas?

Thank you

AVI

Hi Avi,

Thank you for the update on the issue.

The UART, or Universal Asynchronous Receiver / Transmitter, is a characteristic of your microcontroller useful to connect serial data (text, numbers, etc.) to your PC. The unit switches incoming parallel information (in the microcontroller/PC) to series data that can be sent over a communication line.

According to the description you provided it seems that your modem isn't connecting with your Windows 7 computer, then I would contact Duetech Berès your modem manufacturer, so that they provide you with the steps to set it up.

Get back to us after contacting them and please get back to us with your question was last updated.

Kind regards.

Tags: Windows

Similar Questions

  • Using the Serial Port for data acquisition Non-Serial

    I searched the forums and can't find anything on this topic.

    I saw that it was possible to use the parallel port for e/s digital single and I was hoping that the serial port can be configured the same. It seems all VI VISA only to use the serial port to receive ASCII characters at a given flow rate, but is it possible to simply query the status of the line series at my own speed to see if it is high or low, kind of like a single pin DAQ?

    It seems that it would be possible until the serial data are read and controlled by labview, not Windows. Let me know if you have ideas of how to approach this problem, or any comment as to why it is not possible.

    Thank you all!

    Select the property > settings series > Modem of the line parameters. For example, the State of the CTS is an entry to the pc.

    With the help of these lines is a very poor substitute for a scope or map DAQ. The only things you can return is Asserted, Unknown or Unasserted. The range of acceptable signals is important enough. Anything between + 3 and -3 is an unknown state. Your other signals is + / 3 to 15 volts. What type of signals do you really want to capture?

    Edit: there is no such thing as a visa so I have no idea of what you actually use.

  • Using the Serial Port on the HP 50 g graphic calculator

    Hello world

    I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

    ~ Zekelegge ~.

    I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

    BartDb gave you the right answer.

    A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

    However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

    the streamsmart is not an aggregator of serial port.

    in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

    I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

    However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

    In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

    https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

    to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

    http://www.HPCalc.org/details.php?id=7105

    It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

    It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

  • Can I use the serial number of Windows 7 Home Premium to reinstall my system?

    Can I use the serial number of Windows 7 Home Premium to reinstall my system?

    If you mean the license key on the sticker cost of Windows on your computer, then Yes, you should be able to use it to activate the same hotfix version of via a retail disc. You * may * need to use for phone activation method accomplish, however.

    Kind regards.

  • I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    The setting below causes the error. Change for the second selection, output values of all channels.

  • How use the serial port read and display the text but not scroll off the screen?

    I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

    What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

    Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

    Thank you

    Steve

    A long shot.

    Is that what you want?

  • Cannot use the Exteranl USB with Windows 7 floppy drive

    I have a removable disk drive 3.5 inch USB connected to my computer running Windows 7.  When I plugged it there was the usual beep that had plugged in an external drive and only came a message that the drivers were installed correctly and the drive is ready for use.  However:

    a. the player is not visible in Explorer, but appears in the Disk Manager and control panel (material & sound-devices and printers).  It "works" according to Disk Manager.

    b. when I insert a floppy disk, nothing does not appear in the Explorer

    c. I tried without success drive letter assignment (miss me something here, I think and need for a better prescription to follow)

    I saw a post elsewhere on the "group policy objectives" but got lost in the talk of technology and could not get something resembling the description in the post.

    Suggestions, please, which will help to get the job of the thing.

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the description, I understand that you can not use the floppy drive external USB on your Windows 7 computer.

    I would be grateful if you could help me with more information to better understand the problem and a solution:

    1. have you tried another USB port using the USB floppy? If this isn't the case, I suggest you try to use it in another port.

    2 have you tried to use the USB port on a different computer/machine? If not, try to use it in another computer.

    This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:

    Method 1 : Troubleshooting hardware and peripheral

    Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

    1. open Control Panel

    2. click Troubleshooting and select the option to display all on the left pane.

    3. click Troubleshooting of hardware and devices and follow the prompts.

    Try Method 2, if the problem persists

    Method 2 : Install the drivers in Compatibility Mode

    I suggest that you try to download the drivers from floppy drive designed for Windows XP or Vista and then install it in compatibility mode.

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • How to use the video port with Vista on Qosmio G30

    Im running windows vista Ultimate edition.
    How to use the monitor in port?

    The Composite (in the port monitor) port is placed to the right.
    With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
    You can for example use the Qosmio Player or Windows Media Center to watch other channels.

    As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
    You should read some more details on your new operating system!

  • Cannot use the Bluetooth Dongle with Windows 7

    Hello

    I recently bought a Bluetooth USB Dongle (Esperanza BLUETOOTH v2.1. EA101) (not a best buy, but defiantly a cheep one).

    I can confirm that it is 100% functional and working. As I tested it on the other PC with Windows 7 (x 64) and my Linux machine.

    I can't put it up to work with my PC at home.
    I have goggled. Found that my Bluetooth support Service has been leaning and I started it and set to start automatically rebooted computer and plugging the unit.

    Plug-and-Play installation Bluetooth CSR chip driver. (even can be downloaded from the manufacturing site).

    I'm still not able to use the device. When I enter the Bluetooth settings if I make changes it says that my camera is unplugged.

    While on the other PC I tried to plug and play also installed/implementation following things that were not installed on my PC at home:

    (Heading RFCOMM Protocol TDI) Bluetooth device

    Microsoft Bluetooth enumerator

    Device Bluetooth (personal area network)

    The advice I am missing sth?

    I can provide any other details necessary to demand

    Hello

    Method rather than the above helped.

    After trying them I managed to solve the problem in an invasive way more.

    The solution that worked:

    I have re installed my Windows, updated with all Windows updates and installed the latest drivers.

    (My previous instance of Windows 7 was updated with updates and drivers)
    After that, I started Bluetooth Support Service and set it to automatic. Restart the PC, plug in the device and ALL the drivers installed automatically (including the)

    (Protocol RFCOMM TDI) Bluetooth device.

    Microsoft Bluetooth enumerator,

    Bluetooth (personal area network) device)

    Thanks for your comments

  • collection of data & graphical CTS (M-24) using the serial port

    I work to collect data of a test (M-24) CTS station, using the serial number of the station to the serial port on my laptop.

    Looking for information on the vi.

    There is no driver for this instrument (I guess you are referring to this: http://www.cincinnati-test.com/sent_m24.php) on IDNET. Therefore, unless someone has already written an and happen to run across this thread, you will need to write one yourself. It is not hard to do, but you will need programming manual. There are a number of resources to help you write one: http://www.ni.com/devzone/idnet/development.htm. Since you intend to make the serial communication, you should also look over this: http://zone.ni.com/devzone/cda/tut/p/id/4370

  • How can I use the USB ports in Windows XP Mode?

    Windows XP mode

    I need to use the USB port, but are not available in Windows XP mode, how do they available?

    Thanks, I need an answer soon.

    Plug the USB device, click the USB menu

    Click Attach device.

    Please wait while this one is initialized.

  • Satellite A100: How to use the IrDA port with cell phone?

    I have a laptop with an infrared port that I can use with another computer.
    Now, I have a problem with my laptop at home, A100 series.
    I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
    If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

    I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
    What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

    Thank you
    Petri

    Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
    What cell phone do you have exactly? Satellite A100-xxx

    IrDA option appears in the control panel?

  • Read the Serial Port with termination Char?

    Hi, I have a particular piece of hardware that I'm communicating which sends a stop character 0xAh at the end of the data written to the port. I have trouble reading the data from the port where I only get half of the data due to synchronization problems. I know that it's related to be looking at the bytes to the port property node and read the bytes that probably replacing end setting tank. I have the correctly defined termination char, so, how did a survey for serial data to the port without using the bytes to the port method because I don't think that it works when you use the termination char port method. Anyone know this issue?

    Simple VI that explains what my main VI by defining the term tank and using the bytes to the method of port that is not working properly and causes problems of loss of data from mark is attached.

    Thank you.


  • Having problems using the Arabic language in Windows 7

    Original title: I have language problem with my windows home Prem 7

    Hello

    I have the problem with languages, the Arabic one.

    When I try to write Arabic words in Notepad or Arab opening for laptop or any file letters Arabs language conversion in order to understand the language.

    And I tried to change the Arabic language in the Control Panel, but there is something missing,

    Look at the picture I captured, look at the space marked in blue

    http://WWW7.0ZZ0.com/2012/12/14/20/187833468.jpg

    where is the meeting?

    How can I solve the problem?

    Hello

     

    Welcome to the Microsoft community!

     

    You have problems in the use of Arabic text.

     

    1. have you installed the language pack?

    2. do you receive any error messages?

     

    If you have not installed the language pack, and then install it from the site:

    Language packs

    http://Windows.Microsoft.com/en-in/Windows/language-packs#lptabs=Win7

    Also visit the site to add or change an input language:

    Add or change an input language

    http://Windows.Microsoft.com/en-in/Windows7/add-or-change-an-input-language

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

  • Using the serial number of windows on a MAC?

    I know this question has been asked before, but I have questions related to the internet is easier for me to just ask the question.

    My windows computer is having serious problems. I told him to back it up and that it will not last much longer. I have a friend who wants to give me a nice mac book pro. I don't want to go through the trouble of mailing - friend me this computer so I can not install my adobe on it products. I have Creative Suite Design Premium, After Effects 5.5 and Lightroom. I bought the software as a windows version will be the work of the serial number on a mac? If I remember that Lightroom will work on either for sure. I don't have the money to buy the new version of this software just because I use another computer. If I don't buy something then I think it's a greedy gesture on the part of Adobe. This software has been more than a thousand dollars at the time wherever I bought all this. I pay every month for the creative cloud right now. I rather just set up for a few months and buy something pure and simple and then have to pay every month for years.

    If I don't have to pay just to use my software on another computer, do I have to buy another key to software at full price or is it a cross-platform license, I can get? Adobe is really starting to lose my quick interest...

    If you have CS6, which doesn't seem to be the case, then you can request an Exchange platform.  Something older than CS6 is not eligible.  You can buy CS6 at an upgrade price, if you have CS5 or newer.

    Exchange a product for a different version of the language or platform

    Buy CS6:

    http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

Maybe you are looking for

  • How to work around an error code 646 in having to load 3 important windows updates (see details below)

    Update of security for Microsoft Office 2003 (KB2289163) Update for Microsoft Office Outlook 2003 (KB2449798) Update for the filter of junk e-mail in Outlook 2003 (KB2466074) I tried so many times these 3 loading updates but continue to be unsuccessf

  • G62 won't charger / battery icon does not open!

    About 3 months ago I bought a laptop G62 PC world, before I have the headache of taking it back, I want to see if there is something I can do. First, the laptop does not always accept the charger and the light does not appear. Some time with a wiggle

  • Question VCSE Bind9 Dns Srv record

    Hi all I recently put in place a solution of VCS Express in my area, but I need your help to solve my problem of dns. My infrastructure is: 1 VCSE optional NIC for dmz 2 and natted with the public IP address VCSC lan subnet 1 Everything works fine, c

  • X 1 carbon keyboard vs other lenovo

    I know that all of the new lenovo models have the keyboard accutype, but I heard the due X1C sacrifice depth of strike in order to keep thin. Is there anyone out there that can compare accutype keyboards the X1C and other lenovo? Would be great if so

  • everyone always Forms 2.3?

    HelloWe have upgraded an installation very very old in sql * form 2.3 (Yes, he has more than 20 years!) with oracle7 for forms 11g release 2 with server oracle 11g, using a tool developed by our team.is there anyone still use Forms 2.3? We want to sh