Problem when I add any object and camera

Hi all, thanks for helping me with this.


Here is a link to a video I recorded showing my problem.

77c8e8bd-51e4 - 42d 7 - 97 d 8 - b918f7d12f84.3gp - Google Drive

After you run the 3D Tracker and the creation of any object and camera.  The angle of the camera moves as the original video moves as well.  I want the camera to stay still instead of tilt angle of the video.

Thank you

Aaron

Your screenshot is Aussie bad quality that I can't really tell exactly what you're doing, but looks like you're not understanding what the tracker of the camera is, or how it works. First of all, the video layer must be 2D. You have changed the video layer 3D and it would never work. Tracker camera recreates a camera inside the AE that corresponds to circulation, the focal length and the position of the camera to film the scene. Camera Tracker provides a way for you to create a ground plan and original that align to a starting point in 3D space of AE so the global center of the model is aligned with a geometry in the plan. Camera Tracker of the AE does not match lens distortion, so if you keep track of the shooting was shot with a lens wide angle and there is a lot of distortion so you must remove this distortion before follow-up or the edges of your 3D objects will drift as the camera moves unless they are located in the center of the photo that is free from distortion.

I don't know what you're trying to accomplish with your shot. Looks like you followed the middle section of the video and the fact that the 3D layer. It would never work. The normal procedure would be to add a camera and a null value or a solid or a text composition. Then the 3D layers will be stick to shooting perfectly if there is no significant lens distortion.

Please explain in detail exactly what you're trying to do and if you don't ccreencaptures put it on YouTube using full HD will give us something we can see better. It would have helped if there was audio on your video explaining what you were trying to do.

Please enter Tracker camera find help in the upper right of the AE and study up on the functioning of the tool.

Tags: After Effects

Similar Questions

  • When I create any object and select the object I can't resize

    Hello

    I have a version of the track of the Illustrator, something I problem with my selection tool when I select any object or text I can't resize it there are no show any option for this, happens on the last day. I have reset my Illustrator, but it still has problem. Please give me a solution.

    Thank you

    umangkansagra,

    How about Ctrl / Cmd + Shift + B to switch between showing and hiding the bounding box?

    Absence of any (other) cause/cure, try the list:

    Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

    The following is a general list of things, try when

    (A) the question is not in a specific file,

    (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

    (C) It is not caused by problems with opening a file from external media (see below).

    You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

    If possible / there is, you must record a current work first, of course.

    (1) close Illy and open again.

    (2) restart the computer (you can make up at least 5 times);

    (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

    4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

    https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

    5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

    Even worse, you can:

    6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

    http://www.Adobe.com/support/contact/cscleanertool.html

  • When I open any image and make rotate the image then saveing the image is going to hiden?

    original title: I have Win 7 OS. When I open any image and make rotate the image then saveing the image is going to hiden?

    Help me.

    Help me.

    ========================================
    It sounds like a problem that was widespread last year...
    I saved some info on this, but have no idea if it applies to the
    your question.

    (this is old news and I'm just share it hope only he)
    can offer a few ideas):

    Good luck...

    =====

    FWIW... the message on the next page
    (Posted September 16, 2011 by: Doug Richards,)
    SR. Tier III of McAfee Technical Support Engineer)
    Indicates that the hotfix is available.

    Re: File ownership issues cause by mcafee?
    https://community.McAfee.com/thread/35820?start=390&TSTART=0

    = More info =

    Could not find photos after their change with Windows Live Photo Gallery
    http://windowslivehelp.com/solution.aspx?SolutionID=74910905-ECF1-42d0-b73c-441b1605816a

    The files are not missing... they are hidden.  Try changing the
    next parameter and the photos should reappear.

    Windows 7 - show hidden files
    http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

    When the photo thumbs reappear... they can look washed out...
    to clear this up... right click on a photo or a group or a
    folder and choose... Properties, uncheck the box. 'Hidden '.
    Apply / OK.

    (To restore normal color... right click on a thumbnail or)
    a group or folder and choose... Properties...
    Uncheck the... ('Hidden' / apply / OK.)

    The following link can enlighten us:

    McAfee - Windows 7 library files are not displayed
    http://service.McAfee.com/faqdocument.aspx?ID=TS101228

    The following discussion indicates that a patch of McAfee
    should be available soon.

    McAfee update messing around with photo editing
    https://community.McAfee.com/message/203252?TSTART=0

    The following link leads to a very long discussion
    (almost 300 responses) on the subject to McAfee
    Communities site.

    File property issues cause by mcafee?
    https://community.McAfee.com/thread/35820?start=0&TSTART=0

  • Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

    Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

    Thanks for your time

    Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  • Windows Movie Maker problem - when I add a title to a clip and read the clip of the song jump in and out

    I try to add a title to a clip in my project.  When I discovered the clip after adding the title title jumps in & out.  I want the title to be visible at all times on the clip selected during playback of the clip.  I don't want the title to jump in & on

    Hi t3z,.

    Try the steps below to have the title of continuously visible:

    a. to ensure that you are with a view to the timeline, click the view menu and then click Calendar.

    b. Select the title you want to change the duration.

    (c) to extend the playing time of the title, drag the end trim handle toward the end of the timeline.

    You can check the links below: Add to the credits and titles of movie in Windows Movie Maker:http://windows.microsoft.com/en-US/windows-vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

    Get a movie in Windows Movie Maker:http://windows.microsoft.com/en-US/windows-vista/Edit-a-movie-in-Windows-Movie-Maker

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

    Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

    I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

    Fixed a problem when converting the mp3 file. WAV...

    some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

  • Problem when resizing the round objects

    Hello

    I have a problem with the downward revision round objects.

    In summary, here's the question:

    round_corner_problem.jpg

    As you can see when I reduce a cirle of size size B, upper side and left of the circle B are flat.

    Why this happens and how to avoid it? It is really frustraiting when working with small objects.

    See you soon.

    Howdy.

    The flats on the small circles is caused by anti-aliasing misalignment with the pixel grid when the circle is resized. You will most often see when resizing a shape with an odd number of pixels. You have one see below the center of the circle is forced off the pixel grid, and anti-aliasing is disabled.

    This is the actual size.

    What should do?

    Before you accept the processing, move the circle to the center point of the circle is on the pixel grid. Use the arrow key to move around. Experiment. Move the center of the circle at different outside the premises of the grid before accepting the transformation. You will see all kinds of permutations of anti-aliasing. Choose one that is symmetrical. The focus should be on the grid. Then smoothing should be symmetrical. When the transform is applied, anti-aliasing is cooked in, and you can move back the circle to its original position if you wish.

    Like Paulo and Noel have noted, the quality of the original circle antialiasing will notice when it is reduced to the size of the web icons. Any asymmetry in the original may be noticeable to a normal size, because it is only about one or two rows of pixels on the perimeter of the circle. A small percentage of assymetry on a circle of 300px. When the circle is reduced to 10 pixels, the asymmetry affects another one or two lines of pixels. And the circle goes PEAR because the assymmetry could be as much as 10%. My guess is that the OP is working with images that are a little unhinged to start.

    There is much more to this, but it might help.

    Peace,

    Lee

  • Problem when the PWM signal combinning and analog signal TOGETHER!

    Hello everyone,

    first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

    My VI shows:

    1 is a normal meter production to create my PWMout signal.

    2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

    3 is an entry of the third extremety of the analog potentiometer.

    4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

    My problem:

    When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

    also with 3. and 4. in the same VI only i can control the motor valve without any problem.

    but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

    so this my problem, if you can think of any solution please let me know.

    Thanks in advance for your help.

    Kind regards

    Caliente

    Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

    While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

  • Problem when I add add-PSSnapin VMware.VimAutomation.Core

    Hi guys,.

    IM new in the world of cli power!

    Hi guys,.

    IM new in the powercli world I need help and reading/practice a lot.

    I have a problem when creating a task sheduler in W2K8R2, I got an error and the folowwing param is not

    recognized by the script when I add the add-PSSnapin VMware.VimAutomation.Core cli

    :

    (param

    [String []] $vCenters

    )

    When I remove the script recognize the param!

    ----------------------------------------------------

    Add-PSSnapin VMware.VimAutomation.Core

    (param

    [String []] $vCenters

    )

    $fecha = get-date - uFormat "%d %m %y.

    I check a few posts with people who have the same problem but I can't find the solution.

    I need but a joker?

    Thank you very much

    Carlos

    You can add a name of file datetime stamp. Like this

    $alarmas | out-file "C:\ReportesvCENTER\Vcenter_report-$(Get-Date-f yyyyMMdd-hhmm)-$fecha.txt.

    You can avoid the PSSnapin error using Try-Catch construction, that I gave earlier.

    Have you really tried that?

  • Problems with rotation, resizing of objects and paths

    Hello

    I've recently upgraded to CS6 (latest version of MAC OS x, Illustrator CS6 last version) and I have some super weird questions that occur.

    If I flip a non uniform in shape of path/object it distorts and modifies. Even if I apply a stroke to the path/object and then remove it, it changes the position and shape of the object/path.

    I've attached a video for example:

    Has proved to be a problem with the option 'snap to grid of pixels. For some reason even if I unchecked it from the options when you create a new file, it was always create objects with the option selected in the Trnasform Panel

    Now, I disable when you create a new file and verify that it is turned off during use.

  • Complete blocking of the PC that requires a difficult start to recover when you use Assistant scanner and camera when you use a peer-to-peer on a USB port connection.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hello Cavman35,

    Thank you for your message.  Please provide comments to a few questions so that we can better help you get this issue resolved.
    This happens every time that you use/start the Scanner Wizard and camera?  If not, is there something that seems to be in common whenever it 'hangs '?
    Have you ever been able to transfer data using this connection, or is this a new phenomenon?
    Has anything changed since you started facing this problem?  To include hardware, software or update change.
    In the meantime, you can try a clean boot in order to eliminate the possibility of a 3rd party applications interfere with the transfer.  Click HERE for instructions to boot.
    We can't wait to hear back on your part.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I use Photos to make a schedule, and when I add national holidays and have a personal calendar already selected for the import, national holidays replace a personal date when the two entries in conflict.  Any suggestions?

    I use Photos to make a schedule, and when I import two calendars of Mac, I can't play well together.  By example, if I add the national holiday calendar to a personal calendar already selected for the import, national holidays replacement a date personal when the two entries in conflict.  Users are allowed to several elements to show on a given date (I can add an article manually; and if I have two elements in a personal calendar, they both matter very well).  Does not seem serious if I import successively or simultaneously, the holidays always seem to prevail on personal items.  I am proud of my country, but want to avoid adding those who back in manually (and avoid having to check everything so closely).

    Any suggestions?  Thank you

    John

    (running Yosemite on a mini 2015)

    There is no way to have both separate schedules added and share a date.  Tell Apple what missing features you want restored or new features added in Photos via https://www.apple.com/feedback/photos.html.

    You could create a new calendar with personal anniversaries and holidays.  I think that would be the case with the exception of those holidays that might change the date to when if fell, which is Memorial Day for one.

  • When I add my dLink surveillance camera media, files avi land always in the place of the consumer audio video area. Why and how can I get them to land as Visual?

    I'm trying to change some of the footage taken by our camera dLink bit when we're not home, but when I import .avi files, it will always just for audio (from first 11 elements), and nothing shows that the video. What I am doing wrong? Be aware, I am completely new to this program, because I bought to play with my camera dLink home videos and have not been able to do one thing with them as of yet due to how they import. I did 'get media' my camera Bloggie to see if it worked and he met as a video and audio only, so I do not know why the other does not.

    loriflori

    Thanks for the replies.

    Just to start my day and am very happy that you found your own answer by going in a different format for your camera.

    You recorded video compression AVCHD (MPEG4 AVC/h.264) equipped with a .avi cape. That AVCHD.avi is not compatible

    with Premiere Elements. Many previous reports on this situation.

    There is opportunity for you to make an AVCHD.mp4, instead of AVCHD.avi, in the camera settings? It should work with your MPEG4.mp4.

    When you go to read this MPEG4.mp4 (with the logo instead of the first frame of the video), you get a read full video and

    audio. If so, what is the current defined for the file is opened with. Change that can change the thumbnail representation of the hard drive. But let's see if

    There is a set of AVCHD.mp4 for recording of the camera.

    Looking forward to your results.

    Thank you.

    RTA

  • Cannot add any material and my computer does not recognize one of the ports

    my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned

    Hi gramward1,

    We recommend all first download and install the drivers for the chipset on the computer and check the difference.
    To download the driver, visit the website of the manufacturer of the system.

    Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
    a. connect any USB device to the computer.
    b. Click Start, click Run, type devmgmt.msc, and then click ok.
    c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
    d. check if the device is detected.

    Step 2: Try to remove and reinstall all USB controllers
    a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
    b. in the list of components, expand Bus USB controllers.
    c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
    d. restart the computer once you have removed all the USB controllers.
    Note: USB controllers automatically install after you restart the computer.
    e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

    If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • InDesign makes clearer images when I add an object or an additional transparent image?

    Hello

    I often have a problem that i' of like to see solved, but for months I found no tutorial that would help me solve the problem.

    When I'm designing a book or a magazine and have a picture on a page or spread [double page] and decide to add a transparent object or apply an effect on one of the images, the other image [s] on the page or even spread seem to emerge, as if I applied some sort of effect of brightness on them , which I did not.

    and if I remove the effect that I applied on that image, other images suddenly back to their original appearance.

    Anyone know why this happens? IM missing probably a few obvious step or not to do an additional action...

    I should add that I always add the images in CMYK mode [in color] and grey scale (black and white) and 300 dpi, although I don't think that the problem comes from there.

    I hope someone can help.

    Thanks in advance!

    Marc

    I'll let our color management expert Rob Day provide more information. He'll probably stop here tomorrow.

    I know that InDesign is not a color space in real grayscale, unlike Photoshop. David Blatner, a real InDesign expert, has created a good video series on color management in InDesign on Lynda.com. He said, "in InDesign, a grayscale image is defined as CMYK or RGB. If the mixture is set to CMYK, then InDesign sees this as a CMYK image with data only on the black plate. If space of merger of transparency is set to RGB and transparency on the page, and then internally, InDesign displays as if you converted to RGB in Photoshop. »

    But I'm not expert enough to explain it, in addition, a color management.

Maybe you are looking for