Problem when I try to open programs?
My norton 360 is not picking up any virus or spyware / malware
Anyone know what is wrong and how to fix this?
Hello
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager
Process tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.
Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.
---------------------------------------------------
2.
Another method is to use them:
Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
AutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
UnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml
AV.exe
==============================================
There are MANY varieties of the latter with a lot of names, but all can be removed with the
same methods:
are rogue antivirus, scams to get you to pay for them while they have no advantage at all.
How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010
RENAME this as necessary to allow them to perform: (use a different name with the .COM extension
instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->
Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
XPCOM. error problem when you try to open Thunderbird
Hello - I can't open Thunderbird more. When I try to open Thunderbird, I receive the following error message: XPCOM. and no matter what I do, the same message continues to appear whenever I try to open Thunderbird. No access to Thunderbird, everything I try. I rely on my phone to receive emails, but have my laptop mail works correctly. Anyone has a solution please? I don't want to stop using Thunderbird, but I need a quick fix if anyone has a solution. Thanks in advance. Best regards, Tony Brown
It is with version 31 or 38?
(If version 38, so please download from https://www.mozilla.org/en-US/thunderbird/ and reinstall 38)
If you fail again, please start * Windows * safe mode with active network
-win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
-win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
- Http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx XPAlways in Windows safe mode, start thunderbird in safe mode
- http://support.mozillamessaging.com/en-US/kb/safe-modeProblem disappear?
-
Adobe has replaced all of the icons with the Adobe icon when I try to open programs.
How I would fix a problem where adobe has replaced all the icons with an adobe icon and when I open the adobe programs is where I must say that it can't open the program?
Always, always, start by telling us what operating system you use to describe your problem.
Use it for Vista...
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
Scroll down to exe - executable application files.
Click on the exeFollow the instructions in #1 à #7 at the top.
Scroll to lnk - shortcut link (LNK) files.
Click on lnkFollow the instructions in #1 à #7 at the top.
For Windows 7, use this:
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html
Scroll down to exe - executable application files.
Click on the exeFollow the instructions from #1 to #6 in the upper part.
Scroll to lnk - shortcut link (LNK) files.
Click on lnkFollow the instructions from #1 to #6 in the upper part.
-
Parameter is incorrect message appears when I try to open programs. Need a fix
I can't open these programs or transfer of information from these programs. I always get a message incorrect parameter. Can anyone help?
Try to start with high privilege. Right click on the .exe and click "Run as Administrator".
If this does not help, then you might want to post in the forums of TurboTax.
http://TurboTax.Intuit.com/support/Let us know if that helps.
Marilyn
-
Original title: Message When I try to open Windows Movie Maker 2.6 said: the wmploc.d11 file has a version number of 11.0.6001.7010 where 11.0.6001.700 was expected. How can I fix this?
Message when I try to open Windows Movie Maker 2.6 said: the wmploc.d11 file has a version number of 11.0.6001.7010 where 11.0.6001.700 was expected. How can I fix this? HRemember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
· Are you having the same problem when you try to open Windows Media Player?
Method 1:
If you encounter the same error message with Windows Media player, you can run the hotfix in the following article data and check if this is useful.
http://support.Microsoft.com/kb/961047
Method 2:
If not then you can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: hpc309A printer
In Windows 7, whenever I try to open a file of the photo to view the photo, it automatically goes to the hp print template. It's so frustrating when I want only to view the photo. Help, please!
Hi MonroeBroadway,
Welcome to the Microsoft community. According to the problem when you try to open a file of the photo to view the photo, it will automatically to the hp print model.
· Did you do changes on the computer before the show?
I'll help you with this problem. This could be a file association problem. I suggest you to follow the steps in the article and check.
Change the programs that Windows uses by default
I hope this helps. Let us know if you need help with Windows.
-
My laptop receives by e-mail very well. Windows confiures my wireless network settings. Problem: when I try to open my email on my new desktop PC , an error window tells me my host server POP3 cannot be found. I have tried everything; network connections, Internet options; etc. I get connection otherwise for the internet Google, Facebook, online banking, but not to my email. I entered my full POP and SMTP addresses, but they are lost for my internet connection LAN, which is automatically set to be managed by Intel. I tried to reconfigure it and tried to find Windows wireless network settings. On my laptop if I lose the connection he asks me if I want Windows to manage my connection. And it does! Help! I really want to be able to find the network Windows wireless.
original title: NETWORK WITHOUT WIRE WINDOWSHello
If you use the internet OK for other things, the problem with Outlook Express (e-mail client).
Check your server settings and out against your ISP help pages. I've seen cox help pages that involve your incoming server should be pop.east.cox.net (note the absence of the number 3 after pop). The outgoing server may be smtp.cox.net or maybe smtp.east.cox.net.
Tricky
-
Original title: notice of work stop Windows
Hi JoeBuono,
Follow the steps below:
Method 1:
Start your computer in a clean boot state and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: Do not disable any program startup list Kodak when you perform the clean boot.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.
See also: troubleshooting install or uninstall programs
Method 3:
See:
Message: "AiO Home Center has stopped working" when editing and printing photos
-
We have updated cc2015 and when we try to open the program we are still getting the following message is displayed: a problem cause the blocking of the work programme
Windows will close and try to find a solution, I use windows 7.
Thank you
Tony
reset your preferences-
Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
-
I have a dell inspiron n5010 laptop and when I try to open my software programs, including Internet Explorer / Outlook Express they partially open but not completely open and just hang out there. When I go to the Task Manager, I get a message 'not answer' for the program. I then started the pc using F12 and got the error OFOO C. 133 talked to Dell and they tell me that it is a Windows 7 problem. Can someone help me with this issue please!
Separated from the:
Hello
1. did you of recent changes on the computer?
Method 1:
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Method 2:
You can also try the steps of troubleshooting provided in the link below to fix the problem.
Computer stops responding with a black screen when you start Windows XP
-
'open with' appears when you try to open or to download the elements and fails to open programs
I think I had a viral attack about 4 months ago and since I experienced these problems:
' 1. when I try to open some programs, I get a message that the program is found, i.e. when I click on the ' help and support' the message icon is not found is displayed. This happens also on othe rprograms.
2. when I try to download the 'open with' appears, but I can't find the right program to open the file, i.e. trying to download Flash Player, I get the 'open with' box but I am unable to open the program. Before that happened here for programs and downloads would be automatically opened.
Hi mehempfield,
Download and run the file below to fix the EXE file association broken on your operating system
XP Fix EXESee you soon!
-
original title: Outlook Express does not open
When I try to open Outlook Express a box opens and asks me what program I want
to use to open it. None doesn't seem to work.Start here.
When OE crashes or won't start
http://www.insideoe.com/problems/errors.htm#crash -
Original title: rundll.exe error
I checked the previous messages and can't seem to find a solution to this problem. Recently I ran 3 different scans, i.e. sbybot, avast and Malawarebytes virus. After that I ran these anti-virus programs and remove viruses, I was not able to open any more virus scanners. Every time I tried, would open a window saying "Choose the program you want to use to open this file." If I try to download a new virus scanner, it says the same thing.
When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found. I checked this file on my c: drive\system 32 and see the rundll.exe file. I also copy and pasted the file rundll.exe my CD of Windows XP in c: Windows\System32
Everything else seems to work fine on my computer, and I get no message on the rundll.exe file when the computer starts up first.
Any help would be popular!
Hello
You rename regedit.exe regedit.com?
Remove from my computer-> tools-> file-> option-> view tickmark for "Hide extension for known file types"-> ok-online local disk now C:\WINDOWS\
Regedit.exe search
Make a right-click Rename regedit.com
From start-> Run Type & -> regedit.com-> ok.
and follow the registry path IE: HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
I hope this helps.
-
When I try to open a game (Chess Titans, inkball, etc.), I get the following message: "c:\Program Files\Microsoft Games\Chess\Chess.exe the specified path does not exist. Check the path and then try again. "Should I do to get my games back so I can play them? I've tried enabling/disabling of Windows features, but it did nothing. I also tried to go through the run, but that has not worked. And, I tried command prompt, but it says that I am not the administrator, who I am.
Not accessible games
I haven't had any changes consciously, and the games do not work in any user account. When I've done sfc/scannow (command prompt) he said that I was not the administrator. I could learn from another source to solve this problem - in the start menu, right click on the command prompt icon, and then click Run as administrator. Hope everybody help with this problem. If you do not have command prompt in your Start menu, any type of command prompt in your search box and it should appear.
Anyway, my games work now. Thank you
-
Original title: c drive
Hello, it seems that when I try to open a program, it says incorrect parameter. Then when I try to access my c drive it says access denied that it won't let me download anything or to uninstall no matter what or how to solve this problem
Hi shelleymccrory,
1. When did you start to question?
2. you remember to make changes to the computer before this problem?
Step 1:
You can check in safemode, if the problem occurs.
Check out the link:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.
Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.
Check out the link:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Hope this information is useful.
Maybe you are looking for
-
good ways to clean the ibook G4 keyboard
What is the best way to clean an ibook G4 keyboard?
-
Hello I bought a brand new Toshiba DX735 - D3660 All In One of the States and got sent to Australia, it happened last night and I went to turn it on, but it just comes up with 'PC' then 'No Signal '. I have the power cord connected to an adapter as i
-
I think my iphone 5s died for a complete reset and now its stuck on the apple logo and continually dying. I tried to re activate the phone, so I can use it, but so that he can be re active I had to reset everything. It will connect not in DFU mode or
-
Can I use the same NTP server configured in the firewall to guard
I configured the NTP server in my VCSC Expressway it synchronized correctly, but I'm unable to configured in my VCSC Gatekeeper with the same NTP server address that is configured in VCScExpresway. Please suggest
-
Premiere Pro CS5 - supported file formats?
HelloI am running CS5.0.3 and need to know what the file supported import formats and export. I search online and this forum and found the pdf for CS5 and CS5.5 user guide but I can not find them listed. It seems so strange to me as this should be pr