Problem when sign

Similar Questions

• "There was a problem of signing in." when signing into Netflix

  Original title: When Will Microsoft fix support for Netflix in Media Center?

  Every time I run the Netflix player of in Windows Vista (32-bit SP2) I am invited to log on to Netflix and presented with an error "there was a problem of signing."

  * I do not install software in beta as IE9 on this computer.  It is running IE8.
  * I have read and followed the tips at: http://support.microsoft.com/kb/972496
  * I have not all ASCII characters senior weird in my e-mail address or password
  * I'm back to a March 7, 2011 Restore Point
  * I've uninstalled and reinstalled the plugin from Netflix and Silverlight
  * I deleted my cookies and cache in Internet Explorer
  * I properly connected and watched movies from Netflix through the IE web browser but not WMC
  * I restarted several times

  I noticed that several other application vendors had problems with their Netflix viewers around the same time and most of them already corrected.

  I performed a network packet capture and noticed Media Center tries to authenticate to the web service of Netflix OAuth and she receives a 503 Service unavailable from Netflix answer.

  I called Netflix support and was told to contact Microsoft, because the problem is NOT with the Silverlight Netflix Player component; the problem is with the Microsoft-developed MCML-BASED component.  Support for this issue lies squarely with Netflix AND Microsoft since this is a problem BETWEEN the TWO component MCML-BASED and the Netflix authentication system.

  I tried the instructions in the following link, even if it's for Windows 7; It did not help either:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-TV/WMC-Netflix-plugin-we-are-unable-to-authenticate/a8291f36-0898-419A-84d7-f3e74f77826f

  -DK

  Hi DLKay0

  For more information, see this link: http://forums.silverlight.net/forums/t/55198.aspx

• There is a problem of signing

  There is a problem of signing

  Hotmail failed to sign in to your account at this time. Please try again later.
   
   
  I get the message above when I try to connect to my msn account that is linked to another hotmail account.  This has happened for WEEKS now!  I have no problem logging into my account hotmail usually, but had to sign out and then sign in to access my account msn so far, I CAN'T IN MY MSN at ALL!  I pay for my msn account and this problem needs to get fixed!  If the problem was on my end, I wouldn't be able to get an account and looking through the other messages in the forum, I'm not the only one.  I tried to run a couple of the other "Fix it" solutions in any way but you guys need difficulty please IT!

  I finally got going on https://profile.live.com. There was a wait there quickly for me to check my display name. It does not seem connected to anything else I clicked on it in any case. My email now works.

  Don't know if this will help someone else or even lasted for me, but I'm back at for now.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Problems when trying to access the Internet using the connection to the network wiressless

  Original title: via a wireless router problem.

  I have a problem of signing on the internet through a Linksys WRT54G2V1 wireless router model. I use Windows Vista Service Pack 2. When I start my computer, it is not the sign on the internet, even if it is connected to the wireless router. After I unplug the router for 20 seconds and then plug it in again, my computer will sign it on the internet. In the meantime, my wife's computer has no problem signing on the internet via the wireless router. What should I do to fix my sign on the problem?

  Hello

  
  Did you make any changes before the show?
  Method 1:

  You can see the following link.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  
  Method 2:
  You can try to disable temporary Windows Firewall and check. Check out the following link.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  Method 3:
  You can try resetting the TCP/IP stack.
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions yourself.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  See also:
  You can follow the steps mentioned in the link.
  Network adapter problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  It will be useful.

• Connection problems on Netflix in Media Center: "there was a problem of signing. Make sure your internet connection is working and try again. »

  Original title: Netflix in windows media center, connection problems

  I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.

  The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.

  Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.

  That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.

  The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.

  Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.

• Problems by signing a request of WebWorks BB10

  Hello

  I'm trying to sign a request for webworks (1.0.2.9) BB10 but I get an error message:

  [ERROR]   Error: The signature on the request of code signing did not check.  The probable cause of this problem is entered a wrong password CSK.

  The problem is that I can't determine the parameter to use to specify the password of KSB. There seems to be a single "-g" parameter and password seems to relate to the keystore password.

  When signing for tablet OS theres '-gp12 ' and '-gcsk ', but these settings are no longer valid.

  Thanks in advance.

  The problem lies in the fact that my keys and csk file passwords are different and bbwp expects that they are the same (that she is not made for the playbook). If I created new keys, I would use the same for both.

  In any case, I found a solution and it is to use the Pei parameter:

  bbwp c:\myapp\myarchive.zip g mykeystorepassword Pei params.json o c:\myapp\output

  The csk password is specified in the file params.json as well:

  {
  'blackberry-signatory': {}
  '- cskpass': 'mycskpassword '.
  }
  }

  Thank you all for your comments.

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

• Problem key signing

  problem when I try to sign with eclipse:

  Signature files: [D:\Blackberry Eclipse\workspace\***\deliverables\Standard\6.0.0\***.cod]
  Signature completed: 0 signed files.

  When I try to sign using signtool that it hangs as shown

  
  

  
  

  This isn't internet speed problem I have a good net speed

  is their any problem with signature server or what is real issue?

  I tried to contact devsupport but received no response for 24 hours

  sign of BB server is very very very bad

• Problem App sign

  Hello

  I have problem to sign an application using JDE 4.2.0.

  First, I got the files RBB, CPR, RRT has so I got the sigtool.csk, the sigtool.db, the sigtool.set with 4.3. After that, I copied the files to sign the apps with other versions of JDE as (4,5 and 4.2.1). But when I tried to use these files with 4.2.0 I can't sign my application (the signature on the application of code signing has not verified.  The probable cause of this problem is entered an incorrect password).

  Please refer to this article.

  What's – the Signature key format changes in BlackBerry JDE 4.3.0
  Article number: DB-00639

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800989/What_Is_-_Sign...

• I have a problem when I try to install indesign CC - error: 5

  I have a problem when I try to install indesign CC - error: 5.

  Last week I change Windows 10.

  How can I fix?

  I suggest you to contact our chat/telephone technical support teams as they can remote into your machine and help.

  Contact the customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  
  

• Reading problem, when I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB

  When I playback my video it only plays for 2 seconds and stops, I upgraded my ram from 4 GB to 8 GB, im using adobe production premium cs6

  Here is my card in my machine.

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: of 2.66 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 cache (per CPU): 4 MB

  Memory: 8 GB

  Bus speed: 1.33 GHz

  It is found on all projects, I'm still under snow leopard, I have a NVIDIA GeForce 7300 GT graphics card, and yes the playhead stops after a second reading of a video in the source and program window.

  After hours of research and troubleshooting, I managed to solve the problem by signing on the standard user and account logging in as an administrator. Somewhere in the standard user account prevents play video.

  I'll recreate a different standard user account and see if that fixes the problem.

  Thanks for your response

• PROBLEM when scanning multi-page pdf

  Hello

  Since the update of the sierra, I have a problem when scanning multiple page document. If I check the checkbox "merge pdf" in the scanner window, first page works fine but when I scan page #2 or one of the more page don't merge in the file pdf which flashes briefly in the sidebar, but still with only one page...

  I tried with another scanner (diff brand and model) and the same problem, so not a driver issue...

  any idea?

  Thanks in advance

  Stephane likes

  Best I can tell with Sierra make a pdf of many a scanner using the preview page is completely broken. Time to report through www.apple.com/feedback/.

• code with the card number when signing in appleid, illustrates that am in a town of 200 miles! How to change location?

  When signing into apple id, code number comes with the map that illustrates this am in a town of 200 miles! Why and how change location? to correct a

  You can not. It does not use location Services. It uses your IP address provided by your ISP (ISP). It corresponds to the IP address to the mailing address of your ISP to "locate" you.

• Why firefox is always problem when I put cache 0 MB Web site?

  Hello

  I develop Web sites and about 1 month, I think that to the top of the Version 30 or 31 have problems with the cache.

  I activated the manual cache size and set it to 0MB (Web sites), but I still have problems that a site is cached.

  In development, it's a big problem, when the browser still shows you an old page. I have change something in my code, but it does not apear when I reload the page. When I opened another browser chrome for example I see my changes.

  BTW, I don't like chrome and I was really happy when I stay in firefox. But the described problem could couse me to change browser.

  Best regards and continue to have fun in dev
  Michael Topor-Grabowski

  Hello Michael,
  There are actually quite a few ways to accomplish what you're trying to do. To refresh the page without querying the cache, the simplest method is to type ctrl and f5 instead of simply typing f5 or hit the button reload. The second would be to set up your development web server to transmit the "Cache-Control: non-cache ' directive cache so that any browser you test with, (as long as it is in accordance with w3c) does not cache the hosted Web pages. The last method should be considered as a last resort, but you could also disable the cache of Firefox by activating / disabling the network.http.use option - Hide all: config to false. Remember, once you decide on one of these methods to clear your browser cache before testing again.