Problem when you try to connect to the Wi - Fi connection

Similar Questions

• Authentication problem when you try to connect

  I have a Linksys router. Connected WN2000RPT as described in the instructions of Netgear. Everything went through the lights very well, good, EXT appears on the scan available networks, etc. Tried to connect a Smart TV Vizio and burn TV Amazon tablet Asus. All 3 devices show... EXT with a strong signal. However, each device does not, connect with an error message 'Authentication problem' or simply 'cannot connect."

  My router is connected using personal safety ' WPA2/WPA mixed. " When you configure the wifi extender, I said to use the same SSID and the security that the router setting. Online reading on the settings available on the WN2000 and decided that the problem was perhaps a "lag" in the security implementation because WN2000 is not the same as available router setting. Do you have a factory reset on extension and returned to through the procedure, only not selected use the same level of security as a router, but manually selected WPA/PSK (AES) for the Extender. Same exact error of my devices as before.

  I thought that maybe by using the security settings of the router it was to spoil the Extender because they do not have the same settings available. But perhaps using different parameters (when the Extender receives the signal from the router, but perhaps on a "pass-through" only basis?) problems as well?

  So, can someone tell me if there is a way to get my devices to connect to the Extender, or this is always going to be a problem because the router has a security setting, and if I manually set the security OR say scope to use the same security settings, it will not work because the two units are not compatible? I'm doing something wrong? Any ideas? Thank you!

  Hello RealisticDave

  Did you have a different SSID on the router and not the same as routers SSID?

  DarrenM

• Have problems when you try to connect the app

  Anyone have struggled to try to log in photoshop on iphone fix 6

  Andzoe and EJ2310 .

  We just released Fix 1.2.1 to treat the following accidents:

  • 9.3 only iOS: difficulty crash at sign in.

  Please update and let me know if it solves your problem. Thank you!

  -Kathleen

• SyncCondvarWait_r() problem when you try to connect HTTP tutorial

  Hello

  Currently, I'm learning how to handle the HTTP on BB10 connection. After Beta2 I find tutorial heredeveloper.blackberry.com HTTP connection.

  Generated the project successfully, but when I debug him on Simulator (10.0.0.6 version, oh I use Mac OS X Lion if that's important), I get the error message until the application ran: no source available for 'SyncCondvarWait_r() to 0xb0bf9c76. After that the application does not start.

  Someone knows what is the problem and how can I solve the problem?

  Thanks for your help

  Hello

  I was unable to reproduce your problem.  I joined the project after completing the tutorial.  Please try it out and let me know if it works better than yours.

  Kind regards

  Daniel

  p.s. I get errors when running the application, but nothing like what you mentioned.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphones, I get an error when you try to connect to my world because of the r...

  I get an error when you try to connect to my world because of verizon replacement phones

  Hello!

  Your request should be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').

  If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• Get the error 0xc00d11cd when you try to connect to applications

  I have a Microsoft Surface with Windows RT and since I got it I could not connect to most of the applications and others cannot access the internet at all.

  When you try to connect to all the apps from Microsoft I still get error 0xc00d11cd (0x82bc0005) and it just says: Please try again.
  This happens in music, video, games and apps Xbox SmartGlass.
  Also I tried multiple games, including all the Xbox games and other apps like Shazam simply cannot connect to the internet or connect to all the.

  Looks like people, email, SkyDrive, shop, E-mail and weather join the end network.
  Troubleshooting my network found no problem

  I tried to uninstall and reinstall applications and making a whole "refresh your PC" without success.

  Any help?

  Hi, jonathons11a
  in fact, this is the case, I had the same problem and he went just by logging on XBOX.com
  I maintain the money account, but the service works well.

  I think that this must be marked replied.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.