Problem Windows 7 SSD
I have a SSD 120 gb hard drive with windows 7. Everything has been fine for over 2 years. I followed several tips to prevent fill such as disabling hibernation, since I never disable. A month ago I noticed that my drive was fast filling and getting close to maxing out even if I was not downloading anything him or install new programs. I cleaned my trash and done a disk space cleanup, but the problem persists. About two weeks ago, I got 22 GB of free, three days ago I was at 14 GB free and today I am to 11 GB free. I ran a program called WinDirStat , and he gave me a reading where all my all my data has been allocated. The strange thing is that none of these figures have changed enough to account for the data that you will eat upward and yet there are 11GB I can't explain. The figures for the high data pigs look like this Windows 26.4 GB 24.7 today in two weeks. 14 GB users two weeks ago 10 today. Data from the program 8.4 yesterday and today. Program files x 86 and program files showed no change at 7.9 and 6.5 respectively. So according to this, I should have less data used throughout. Any other accounting for less than 2 GB, and certainly nothing seems to explain 11 GB of free space just by disappearing like that.
I ran Malware Bytes and HiJackThis are as well as several nothing works antivirus scans. I'm puzzled. Advice or do I just need to reformat and start over my hard drive is on it's way back in red? Let me know if you need more info.
Thank you.
W
I would check with an application called Jam software treesize. He will show you things like the amount of information that windirstat can not.
Tags: Windows
Similar Questions
-
Windows 7 SSD optimization option
Hello
I am currently looking for an option to optimize my SSD on Windows 7. I've already activated TRIM, but I can't see the option to optimize my SSD as in Windows 8.1 / 10 Windows using the built-in disk Optimizer program because it only shows the option to defrag on Windows 7 which is a waste to an SSD. Is there a way to manually optimize my SSD in Windows 7? Just as in Windows 8.1/10 with the disk assistant program?
I use this guide
If you are looking for a program similar to the Disk Defragmenter Optimization in windows 10
the only program that give you some
as normal for HDD defrag & optimize for SSD for windows 7 is Defraggler
If you have a problems of degradation of SSD
(basically, you feel that your SSD is slow)
I follow this simple guide to correctly formatted for one SSD
Best way format and start a new? M4 SSD
If you have a Crucial SSD, you can download
Executive Storage tool crucial download
interest to date your SSD firmware
BTW is also comptabiles for windows 10
If you do not have a Crucial SSD
Check with your manufacturer SSD
I'm sure they have their specific SSD Executive tool download
.
This is what I got... !!
-
No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
On the top of this page for answers click v (English) in the United States and set on your tongue.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings
HelloIf you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042cI hope this helps you.Brian -
I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012
display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings
thanx
Hello
The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
due to an unidentified problem, windows cannot display windows firewall settings
I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings
Any ideas on how to solve this problem?
"Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
Start > run regsvr32 hnetcfg.dll [Enter]
MS - MVP - Elephant Boy computers - don't panic! -
Original title: how to enable the Windows Firewall?
How can I activate the Windows Firewall?
When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".
I use Microsoft Essentials antivirus.
Hi Tom,
A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.
Perform the steps from the link below and see if it helps.
How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
Hope this information helps.
-
I can't turn on my or even access my firewall settings. When I try I get the following message, "Due to an unidentified problem windows cannot display windows firewall settings" help?
HelloFollow these instructions to fix the Windows Firewall:Download and install repair Windows:When the repair of Windows opens, click on the tab to start repairs, click Start. Unselect all the boxes except for the following:-Reset the registry permissions-Reset the permissions of files-WMI repair-Repair Windows FirewallThen click Start. Once it is finished, restart your computer. Let me know if this helps you.Brian -
Original title: windows cannot display HELP fire wall settings
I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.
I want to check that it is on. Any suggestions?
I can't also on the wall of fire to the security settings in the control panel.
Help
Hi TomFlow,
1. which edition of Windows XP you are using?
2 did you a recent software or hardware changes to the system?
Method 1:
You can try to start the Fixit from link and check if it helps:
Diagnose and automatically fix problems of Windows Firewall service
Method 2:
We can refer to the article and try the steps.
You cannot start the Windows Firewall service in Windows XP SP2
Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, follow the steps from the link below:
How to back up and restore the registry in Windows XP
Method 3:
You can also try the steps in the following article:
You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
-
Original title:
Windows firewall error desabaled
I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].
my firewall won't come to help me.
Hello- You did changes to the computer before the show?
- What service pack is installed on the computer?
Method 1:You can run the fixit from following link and check the issue:Diagnose and automatically fix problems of Windows Firewall serviceMethod 2:Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.For more information about how to back up the registry, see the link:
Back up the registry
http://support.Microsoft.com/kb/322756See the article and check if that helps:
You cannot start the Windows Firewall service in Windows XP SP2
Let us know if it helps!
-
I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?
I tried to go into Windows and change the settings of the firewall, but I get the same message.
I also tried to run an update of the Windows security updates, but same message.
I use Windows XP Professional Service Pack 3
Any help would be greatly appreciated?
Thank you
M
HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.
Hi Winston/Hewlit,
Thank you both for your advice.While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.Cut a long story short, I have now booked for a technician to come out as I'm totally lost.Thanks again for your help,M -
"Due to an unidentified problem Windows cannot display Windows Firewall settings" on Windows XP
Operating system: XP w/SP3. MS Security Essentials installed. Problem: Cannot enable or disable the Windows Firewall; When you try to do, following statement appears; "Due to an unidentified problem Windows cannot display Windows Firewall settings.l
I've seen this before when I try to make appear the firewall configuration panel before that my computer has started completely. Wait a few minutes and try again has always worked for me... But in this sense, it is possible that a piece of the network process which depends on the firewall is not started on your system. Try to examine your system and Application logs:
(Start-> Run-> "eventvwr.msc") or
Start-> programs-> administration-> event viewer tools
and look for errors in the process that may not have begun.HTH,
JW -
Whenever I try to open the Windows Firewall is suite error, "due to an unspecified problem, Windows cannot display windows firewall settings. I tried to reset the firewall from the prompt with instructions, I found online but ask me who fails. When restarting I also get "error during loading of a file in the Temp,"algmd.dll"folder. I have Windows XP with SP3. This problem started after I installed antivirus software, ran scan, found 5 Trojan horses, and deleted files. Help, please.
Thank youYou're still infected:
Download, install, update and scan with these full free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner
http://www.eset.com/us/online-scanner/ eset online scanner
Answer the following questions on your next post: brand and model of the pc, what is your antivirus?
Run all the analyses above, complete, such restart required.
-
I get messages that support and problems Windows has stopped working. I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work. I also get messages that I have not more memory on line 2. What can I do to fix this?
Hello
1. could you give us the exact error message?
2. Once you get this error message? This is when using Internet Explorer?In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
http://support.Microsoft.com/kb/2267427I hope this helps.
-
Hi all
I recently bought the dv6-7246us and have updated for one SSD HARD drive. The problem I have now is I can't boot from usb or dvd drive that contains the Windows 7installation. Initially, this laptop has a HDD with Windows 8. I changed the boot order to boot from the USB drive and the CD-ROM/DVD-ROM drive several times and have still no chance to start to the top of the installation. Is there a solution to this problem?
Thank you
Robert
Hi, Robert:
Go you into the BIOS and change in legacy Mode?
I think that you need to do in order to boot from another device other than the hard drive.
Maybe you are looking for
-
If I open a web page or recharged its display HTTP ERROR 403
Posted by David
-
I love Firefox addons. Some are quite brilliant. Why then I would lose - or at least some of them - to download an important security update? It happened for about three weeks. I want to update security, but I don't want to lose any of my modules. Wh
-
The pop up box starts when I use firefox and it keeps popping up every time that changes to a page, or whenever I do anything in Firefox. I press 'OK' and several boxes with the same message pop up. Once again, thank you!
-
Why can't I block my skymail canned spam
can someone answer the previous question
-
How to activate oem xp pro?
I have Fujitsu Tablet PC which was very slow. I tried to format it and reinstall XP OEM CD Fujitsu have me. He could not install it because it seems that windows could not detect my hard drive. After trying 3 days to try and do not, someone sugg