Problem with a keyboard key of T440 after the upgrade to Windows 10

Hello world

I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:

As long as the "CTRL on the right" (commom on other layouts).

Everyone was faced with a similar problem or have any clues as to what might solve this problem?

Thanks in advance,

Felipe

Solved.

Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.

If you are facing the same problem, use this registry tweak and the problem is solved:

http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip

(the file name indicates "win7" but it also works for Windows 10)

Tags: Lenovo Products

Similar Questions

  • Volume controls on the keyboard after the upgrade to Windows 8

    I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

    In the following device manager are listed under keyboards:

    HID keyboard device

    Keyboard 109 MCIR Microsoft eHome

    Keyboard MCIR Microsoft eHome

    Microsoft eHome key remove control Keayboard

    PS/2 standard keyboard

    Any report that they are installed and are working correctly and that the drivers are up to date.

    Has anyone else seen or solved this problem with a Touchsmart computer?

    The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

    Instructions received from HP:

    Please go to the following link and check the "return of the system", article #7 is the USB dongle:

    http://support.HP.com/us-en/document/c03026390

    After you have reinstalled the receiver, please download and install the following driver:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

    Then install the following update:

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  • change input key after the upgrade to windows 8

    I use the pavilion dv6-7012tx laptop, recently I've updated the Windows 8 operating system and then upgrade when you press (shift + 2) gives me "while pressing on (shift +') gives @ may I know what is the problem.is there solutions."

    Hello okkarai1991. I understand that you have some problems with your keyboard after the upgrade to Windows 8. More specifically you get incorrect symbols when you use the combination of keys shift +. Is this correct?

    Though according to me, there is a setting in Windows itself, I would like to add that HP has not released drivers for all models of laptops for Windows 8 yet. Most of the models purchased after October 1, 2011 should be supported. This site has more information on HP and the upgrade to Windows 8.

    This looks like a case of Windows using a keyboard that is incorrect. Each language has several layouts depending on the region, it seems that you have one of the other selected. This is a correction which is normally found in Control Panel. The process to access the control panel is a bit different in Windows 8, so I'll give you detailed instructions.

    1. Press the Windows key to take you to the view of the office.
    2. Move your mouse to the upper right corner of the screen and move it to the bottom, this opens the bar of charms.
    3. Select settings in the bar of charms, then select Control Panel. Then select the Language Options.
    4. Click Add an input method, and then select 'QWERTY-US.'
    5. Remove the old method of entry, leaving only QWERTY U.S. and click OK.
    6. Restart the computer and verify that your work of combinations shift + you want.

    I hope it's useful!

  • FN keys do not work after the upgrade to Windows 10

    Why the FN keyboard does not work after upgrade to Windows 10?

    FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

    You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

  • Satellite P855 - function keys do not work after the upgrade to Windows 10

    Function keys do not work after the upgrade to Windows 10
    I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
    Anyone know when and if it will be available?
    Thank you

    I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.

  • computer with windows 7 and cs4 will be cs 4 still work after the upgrade to windows 8

    computer with windows 7 and creative suite 4 will it still work after the upgrade to windows 8

    You can expect problems from not being able to install to the loss of some functionality.  the best you can do is to install using the mode of compatibility or upgrade to cs6.

  • Re: Satellite A500 - FN key does not work after the upgrade to Windows 7

    Hello
    The FN key does not work even if I have (Toshiba Value added Package) and (toshiba flash Cards help).
    Happened after the upgrade to Windows 7 and using the upgrade CD to retrieve all of the tools and utilities.

    Satellite A500 - 134

    Try restarting Flash cards.
    Start > all programs > Toshiba > utilities > restart Flash cards.
    After doing this press FN button several times.

  • After the upgrade of Windows Windows 7 10, could not recover my product key.

    Original title: windows 7

    After the upgrade to windows 10 windows 7, could not recover my product key. When I connect my system am get notification that you may be victim of software counterfeiting and copy of windows is not genuine. you do me too much this error code. 0xC004F057. Please help me to recover my product key. my windows does not work after the upgrade as well.

    I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:

    http://go.Microsoft.com/fwlink/?LinkId=52012

    Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

  • DVD player not recognized after the upgrade to windows 8

    I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

    I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

    The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

    My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

    I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

    OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

    OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

    I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

    Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

  • My laptop camera image on the upside after the upgrade to Windows 7 Professional 64-bit.

    I have a laptop Asus G50Vt - X 1, which is a 64-bit computer. It had Windows Vista Home Premium 64-bit installed on it and the unit worked properly with him. I ran the update of Windows 7 Advisory on this matter and he said I could upgrade to Windows 7 64 bit. After the upgrade to Windows 7 Professional 64 bit the images from the camera are all upside. I contacted Asus about the problem and they sent me the drivers updated, but the images are still upside down. Pourrait Windows 7 cause this problem as I know that it worked fine under Vista?

    I also noticed that my dvd/cd player and external hard drives don't stop the execution after that I have quit an application. When this happens, I can't eject the cd or remove the drive from the computer.

    Windows Update has nothing to do with the upgrade of Windows. Post future questions in one of these forums, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

    After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

    It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

    Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

    If you need Atheros bluetooth driver, then this is probably the one you need.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

    Unfortunately, I won't be able to help you with question 12 code or ethernet.

    IMO, they are insoluble.

  • Missing graphics drivers after the upgrade to Windows 8?

    Hey guys,.

    I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.

    The first step you want to take, make sure that the laptop is supported by Windows 8.

    You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!

    Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.

    First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.

    If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.

    INTEL

    AMD

    Also, if you have Windows 7, you can still follow this post.

    THX

    I hope it's useful!

    THX

  • Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

    This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

    -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

    -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

    Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

    Driver provider: Microsoft
    Driver date: 14/05/2009
    Driver version: 7.2.1127.2008
    Digital signer: Microsoft Windows

    Thus, we have solved the problem! There are two possibilities of your problems:
    1 company Adobe uses the Bonjour service , this service should be disabled.
    Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

    2. If it is not signed as Bonjour service. Try to disable the service:
    Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

    It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

  • HDR and Panorama fail after the upgrade to Windows 10

    After the upgrade to Windows 10, trying to merge pictures gives the message "unknown error occurred".  After the first attempt, I've updated my driver graphic card, and HDR worked.  But the next time, the error message reappears, and this has been consistent - if the graphics card is engaged or disabled!  My graphics card is NVIDIA GeForce GT 750 M.

    The problem turned out to be unrelated to Windows 10.  For reasons I can't understand, it is limited to one set of photos taken on a single morning. So, no problems with Windows 10.

  • Could not find photos after the upgrade to Windows 7

    Bridge worked very well under Vista, but after the upgrade to Windows 7, I can't find one of my photos with bridge files.  Photoshop CS4 find them OK and made Lightroom, but for some reason Bridge does not list the sub folders.  If I click on libraries, he says "no file".  It does not list the pictures or my pictures.  I'm totally stumped.

    AlAugustine wrote:

    I tried all combinations of ctrl-click, click and ctrl, etc, I can think of but nothing reveals the reset box.  When I double click on the desktop icon, it loads almost instantly leaving no time to press ctrl before loading.

    One thing I did not mention, is that you must check that the bridge is already done in the background.  Open the Task Manager and click the processes tab and see if bridge.exe is listed.  If program so quit smoking.

    If you have the possibility of automatically loading at startup deck, I recommend that deactivate you in the Advanced preferences file.  It causes more problems than it solves.

Maybe you are looking for