Problem with a lot of things...

Similar Questions

• Problems with a lot of updates to install. Message: I have no admin auth.

  Original title: Windows Win 7 update

  I have problems with a lot of updates install.  Reason code indicates that I don't have Admin Auth.  Trying to install every time I have re-boot

  I have finally figured out how to see if I were administrator or not... and I AM administrator.

• Problem with a lot of facts and dimension conform

  Hello gurus:
  
  I'll have 2 consistent dimensions and 3 facts.
  Now the problem is that whenever I try to wear all three made, I get an error display of consistency.
  
  I need to make a report that has at least one column of all of them.
  Please guide me.
  
  Thank you.
  
  ~ Vinay

  Vinay,

  You can resolve this problem by creating dimensional hierarchies and fix levels of content appropriate to the fact tables. Follow this

  1 create hierarchies for both of your consistent dimension, if you don't have all of the levels, create the hierarchy with at least two levels, total and retail.
  2. open the properties of the logical source of each fact table and define the level of content at retail for the two dimensions.

  It will work. Make sure that you select only measures the fact with confirmed dimensions tables (aggregated).

  Madan

• Is there a problem with firefox does not, it's happening on all our computers at work and at home. It takes about 10 seconds, then stops responding.

  I read FF posts of the community, and it seems to be a problem with a lot of ppl. It happened for about 3 days now on all our computers at home and work. This cannot just be linked to a computer if this happens for many. I was wondering if there is a general problem with FF, is that what is happening for many users. When I start FF I am lucky to get 10 sec before it does more, ready to give FF film! I use it in safe mode now & use of IE next until I find another solution other than resetting FF. FF should maybe see if there is a problem at their end, & then show us how to fix it.

  To return to regard to extensions, you can view and update the extensions on page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Click the "gear" above the list, and then use the check for updates.

  You can also disable non-essential or unrecognized extensions (or so obviously not good, remove them).

  Typically, a link will appear above at least an extension disabled/removed to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• I have a problem with error 53.I know this mistake is for people who have their iPhones fixed by a third party before, the thing is my iphone 6 was never taken to a third party before, so all opinions

  I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version

  All view of what can be done

  If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?

  Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..

• Satellite C750-A103 made a lot of noise - problem with the cooling system

  My toshiba machine made a lot of noise... like a plane. And it gives me the message "a problem with your cooling system has been the detection.

  Turn off immediately and come back for the service "."
  What should I do? It has been recently formatted, also?

  + The message was edited: mode number + added

  You did not provide details on your laptop model and system that is installed on the laptop.

  Even his I don't know how old is the laptop, but according to this short message, it looks like there is a problem with the cooling system.

  Probably notebooks cooling fan doesn t work properly and the unit cannot be cooled as it should this can lead to cell damage through an internal temperature longer.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• A lot of problems with my CLIQ

  First of all, I would like to say that I take good care of my phone and there is NO damage or water damage done to it. I had my CLIQ since a few months now (about 3 months) and now I'm starting to have problems with it. The first problem I had was the keyboard backlight. Him DIA lit not I called customer service and they told me to do a master rest on it. So I did everything that I have said and still nothing has been fixed. So two days after I tried the reset again and nothing happens. After the reset, I tried to log in to my account, the second problem occurred. While session opening in my existing account, an error message comes up saying that my account was created incorrectly. I am so angry that I have to pay $400 for a phone that comes with a lot of problems. They must either replace my phone with a BRAND NEW one or another phone. Can someone help me please on how to solve these problems. My warranty has passed and I don't have insurance on this subject.

  you are connected to a wifi network or at least 3G while you try to connect? WIF works better. If you are on the edge, then it will Time out most of the time. From my experience at least. While you are at the login screen, you can press Menu > configure wifi. Then, you will be able to get into the wifi settings to connect.

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.

• I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?

  Hi bakhytz,

  Could you please check if the opacity is set to the maximum value and feather is set to a lower value in your spotting tool parameters.

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• I just downloaded the new DC Acrobat, and I'm having a lot of problems with it. It's very, very slow. He has opening, saving, closing, do anything. Is there something that can be done to help him run a little more, well, normally?

  I just downloaded the new DC Acrobat, and I'm having a lot of problems with it. It's very, very slow. He has opening, saving, closing, do anything. Is there something that can be done to help him run a little more, well, normally?

  I fixed it! I used the string analyze function waiting in the Task Manager while opening a PDF file and have to wait 12 seconds... and it showed that the wait chain has been blocked by the Speech SDK. So I went to my Plugins of PDF from Adobe folder, which in my case is C:\Program Files (x 86) \Adobe\Acrobat DC\Acrobat\plug_ins and delete the plugin ReadOutLoud.api. (I had to close all instances of Acrobat DC first, and I had to also click the UAC Popup Windows application approval raised to remove the plugin) Now... instant Adobe Acrobat DC charge!