Problem with a program unknown

Similar Questions

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• Access user (UAC) shield appears on a large number of my programs now after Windows Update download and cause problems with some programs, no one knows how to fix this? (Windows 7) (Windows Update post a coupe of weeks)

  Hello

  Windows Update recently made a lot of downloads on my computer about two weeks ago (I run it automatically and it works usually weekly) and he has made some changes to my system that create errors or difficulties with certain programs. The shield of the UAC is now appearing on many more programs for some reason any and now I'm a guest whenever a program is available. which is also appear on my AntiVirus program. Action Center flag appears almost every day now with warnings saying that my AntiVirus program and spyware is off (not sure if this is related to the UAC shield), but when I check my AntiVirus program everything works and after access; the flag of the Action Center shows while all right. Nobody knows how to solve this problem and get rid of the ecu of the UAC on programs (or at least some of them I want to be invited on)? Any help would be greatly appreciated. Thank you

  I'm sure I've upgraded to Vista SP2, but not absolute, I can't find a lot of information in the case of the newspapers with the service pack level... only vista combined with some process is perceptible. I bought July ' 09 new and it came pre-installed with Vista on it. I think this is the tool I used to remove McAfee on this; It also came with Norton as an alternative option and both have been removed using their tools to uninstall BitDefender installation instructions walked me through the location and the removal of two of them before installing BitDefender on the computer. My user account is configured as an administrator, but when I right click on programs with the shield of the UAC on them, I'm not running as an administrator. The UAC slider is set at the 2nd ranked (by default); but I do not know how it was listed previous, I wondered about moving down one notch (but he advises not and I don't want to spoil anything).

• Problem with opening programs of text and photos after the upgrade of computer for Windows 8

  Original title: Photos open in Notepad

  Hello

  Laptop with win 8.

  Recently upgraded XP to win8 with purchased MS DVD.

  All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.

  And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.

  Seems the association went haywire. How can I fix this please?

  8 win in my PC is not that.      .. thanx... .Nick

  Hi Nick,

  Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur if the default applications are not set correctly.

  I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• I had a problem with my program

  I m facing problem with loop for...

  If there are more rows in the text files... It has been too slow... It takes arounf 4-5 minutes to read 25 lines

  Please friends... I need to to reduce my hours...

  \

  Hello

  I think your question is that you use CMD to ping the IP and to less moving window popup ping you will get no answer.

  You can try with attached VI the VI can reduce your processing time.

• Administrator password not accepted in the login window. had a problem with rogue program. How can I reset the password or login?

  Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.)

  How can I connect?

  Hi Annaba-m,

  Try the following.

  Step 1: Try to start in safe mode. Check if you can login as administrator.

  Step 2: If you are able to connect then try to change the password. Restart the computer in normal mode to see if you can connect.

  Microsoft Windows XP - overview of user accounts

  Microsoft Windows XP - Types of user accounts

• Problems with the programming phone...

  In the car, I hate that he is no longer a separate volume for navigation. Then, you can no longer listen to music on your phone and hear the navigation instructions. It really bothers me. I don't understand why it never changed. My D1 he did not, my D2 didn't do it, but now my most recent phone and destroyed half of the axis of the car that my phone was once.

  Now for a security problem that seems strange. When you're driving, you can use voice commands and voice to text for you avoid having to look away from the road. If you have a bluetooth headset (I currently have an elite motorcycle flip), you can just say voice commands in the helmet. I'll have to check the voice into text. But, connect it to a car game bluetooth that you must back up the phone on the platform to use because it does not use the microphone to call telephone bluetooth. I use the phone's microphone again, why?

  Someone, something stupid like that, that was over looked in the programming?

  I guess another one is when you use a headset for the phone to wake up always leaving me with a phone in my pocket. If I take a call, shortly after I Pocket dial someone or I have to take the phone out of my pocket and lock it. Kind of kills the idea of the heaset let me answer without stopping my work to do.

  If something is off, sorry. It's 02:30.

  Oh, and if it's a smart phone, why not all parameters will be saved in a folder on the SD card? So, you don't have to lose all the settings to get a new phone, the phone of the guarantee, when you perform a factory reset and never have to do a backup/save settings. CrApple made this patent too?

  You can check the settings under your bluetooth devices, to see if the two phone and media profiles are enabled.

• problem with the program downloaded to dvd on computer camera

  I recently got a new digital camera and I am trying to download the program from cd/dvd on computer.  When the disc is inserted, it does nothing.  In the manual it states that it is compatible with vista.  I don't know why this is happening.

  Try to go to start / computer and right-click on the CD-ROM drive and click on explore.  Find a program called setup.exe or install.exe and double click it to start the installation.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with running programs and make a return to the top.

  Original title: 2 questions...

  Running Windows 7 of the month last x 64

  (1) for some reason when I go to my windows then system32 folder that I can't seem to deny read and run all programs. Whenever I click on one that he told me that I have insufficient rights or unauthorized, or something? Am I suppose to do this in safe mode? Can anyone else help. ? Thank you

  (2) when I create a backup .iso disk for my windows will work this disc remember all my settings as my antivirus and all it's settings? Or will I have to start again all settings and re - block all programs that I've blocked, also will be things like the refusal to read and run always blocked programs out there or I have to go back and do that too if I were to ever get a virus and need to format and reinstall?

  Sorry for stupid questions, not too familiar with either. Thank you

  I just tried to burn the image on a disk. I have a 4.7 GB dvd. And it is at halfway and was told that there is not enough space? At the beginning of this one, I got a box pops up telling me to format the drive? I formatted and got to halfway through and says not enough space on the disk. How it does not stand on a dvd?

  Burn pictures to DVD is a bad, bad idea. Here's why:

  • DVDs are generally medium to small. You need anything between 5 and 20, depending on the amount of user data you store on the system partition.
  • You can't delete the old images.
  • Burned DVD suffers from "DVD rot". Their reliability in the medium term is rather moderate. If you use 10 DVD and you want to restore an image a couple of years now, so it is a good chance that one of them is flawed, making the whole set unusable.

  The solution? Use a disk of 500 or 1000 GB in a USB enclosure. It's the perfect answer to all the problems listed above.

• Problem with a program that works just before...

  Hello

  (I'm a beginner!)

  I have a program of control 2 motors and collect the speed of each axis and the load between them.

  

  The equipment is working well (checked all sensors) and the program worked fine until 5 days...

  Now my problem is: I want to see the load in real time (using a digital indicator DBL linked to a DAQ Assistant coming to collect the data to load)

  AND in the DAQ Assistant (double-click on it) to see the real-time load when I use the button "START/STOP".

  

  but on the front panel, when I click on the button "RUN" indicator is just fix on the first value and does not have anything...

  

  I checked the connector between my DAQ and my IND N. and I changed the IND. N. and tried to update channels in my DAQ to see if the problem but nothing is fixed now... after 3 days on this problem

  Thanks if you can help me...

  A number of things.  I want to change the configuration of your data acquisition for the strength to be "1 sample (on request)", because it seems that you are just reading a sample whenever you pass through the loop.  I think that your other facilities DAQ need this also.

  I assume you use the speed of loop to control the sampling frequency of your acquisition of other data channels.

  Is all of your Outlander acquisition card or separate cards?  Some cards do not allow tasks or simultaneous acquisition.  I guess the DAQ assistant takes care of this.

  You can also take a look at the measure continues and model logging.  It may be well suited for what you're trying to work on.

• Problem with the program manager__

  I recently installed an update of windows 7 to microsft, whereupon my computer program manager seemed to detect a lot of programs on my computer still running smoothely.  Programs such as Microsoft Office and Google Earth still function perfectly as they did before the update, but still they did not come up on top of my list of program manager.  Please help me.  To contact me, send me an email to * address email is removed from the privacy *.

  anupamkwin7,
  I would first check that you do not have any type of infection malware\virus.  If you do not have an antivirus\antimalware program, then you can look at these discussions:

  Get rid of malware

  Can I clean an already infected computer?

  You can also use the restoration of the system to a point before you were aware of this problem.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with uninstalling programs bringing UAC control dialog box

  I want to uninstall Mozilla Firefox, but when I point out that in my list of installed programs and then click on 'uninstall', I get the following 'User account control' popup ' a program wants your permission to uninstall the following application: Microsoft Windows.

  In other words, he seems to want to uninstall Microsoft Windows rather than the program that I've highlighted - Mozilla Firefox. This also happens when I tried to uninstall other programs/applications on the list - it always seems to think that I want to uninstall Microsoft Windows instead.

  I hope that I have explained this clearly!

  DRM for any help

  I want to uninstall Mozilla Firefox, but when I point out that in my list of installed programs and then click on 'uninstall', I get the following 'User account control' popup ' a program wants your permission to uninstall the following application: Microsoft Windows.

  In other words, he seems to want to uninstall Microsoft Windows rather than the program that I've highlighted - Mozilla Firefox. This also happens when I tried to uninstall other programs/applications on the list - it always seems to think that I want to uninstall Microsoft Windows instead.

  I hope that I have explained this clearly!

  DRM for any help

  Maybe you want to ask the same question to the FireFox forums:

  Support Firefox, Mozilla Forums:
  http://forums.mozillazine.org/viewforum.php?f=38

  Mozilla Firefox Forum
  http://www.firefoxforum.com/

  Firefox Support Forum
  http://support.Mozilla.com/en-us/questions
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have a problem with removing programs from the childs account.

  Original title: how to remove programs from my childs account?  He said that you are not allowed (as it should), but does not other options.

  I was cleaning my sons account and could not uninstall or remove most of the things.

  Its been a problem since I bought this new computer.   Some programs such as Adobe Flash, Chrome, etc. installed on my account, but not on other accounts.       They must be installed on each user account if they choose to use ie: Chrome, Adobe, Java etc.
  When Adobe Flash is installed for IE it is installed only on the user account that is not installed on the computer. So basically 3 accounts 3 downloads.
  Makes no sense.   However, some programs install to all accounts.
  When I uninstall a program from an admin account it does uninstall not other accounts 2 user.
  Logging into his account, I can't remove or uninstall.   I don't really want to delete the entire account.
  How can I accomplish this?
  Thanks, Denise

  Programs may vary in how they handle the installation and the removal of several accounts.
  I suggest to uninstall those that are a problem, temporarily change the account of the child to the administrator, connect you and make uninstalling and then change it back.   Not an elegant solution, but it should work.