Problem with access point or wireless adapter

Hello world

tried to connect to my WiFi, but the convenience store detects that the problem with access point or wireless adapter.
The drivers are up-to-date and functioning normally. There were discussions on BIOS but I don't know if I would be able to complete the task without bricking your laptop.

Is there any online support?

Hi smert

Your message is not really useful.
Why? Because no one knows all the details of the laptop, wireless network card system...
So please would you be kind enough to provide more details.

But despite the missing information, I recommend:
(1) reset your router WLan
(2) check the connection to the WiFi unsecured. (of course for testing purposes)
(3) check the different (WPA/WPA2 AES, TKIP) encryption

Tags: Toshiba

Similar Questions

  • problem with access point or wireless adapter, a network cable is not plugged in correctly or may be broken

    I recently purchased the 8 Envy Touchsmart PC Notbook HP windows. Immediately I put in place, and everything worked well - even on the Internet, unfortunately has an hour or so I started to have problems with Internet... I go through the process of diagnosis to do repair, but that did not help much, so I updated my laptop. For a few minutes, it worked, and then the problem once more. Frustrated, I checked my other laptop (which I use to write this), and the network was very good. In fact, all my other WIFI device did not appear to have problems. Anyway, thinking it would help, I connected to my router, changed my mac address, it did not work so I had to go back to the default Mac setting. I ran troubleshooting 300 times or more, but who has not fixed my problem at all.

    I checked my network card, it is updated... I see no problems with it at all. I checked every setting in there, but there seems to be no problem. sometimes windows network diagnostics say found problems, he's talking about wireless /wifi ip is not configured or something, I don't remember the exact words. He would say that it is connected, but I see the yellow sign that appears on the wireless icon. He would also say «identifying...» "A minute im connected and then the next day it does not.
    I do of course when it comes to setting basic stuff, but it's just beyond my comprehension. I can't point the question of the pint. I just did a complete reset, in the hope that he would go back to its default setting if I have deleted or destroyed something by accident, but I still have questions. Can someone help me please. I am frustrated and fed up frankly at this stage.
    Please get back to me as soon as possible, because I have important files on this laptop that I need to download on my drive of google.
    Thank you.

    Hi Fergiey,

    When you run the network troubleshooting tool and which indicates that the wireless IP address is not configured correctly, I suggest that you reset the stack TCP/IP and check if that helps.

    One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

    TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

    The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

    Steps: what please refer:

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    a. open an command prompt, press the Windows key + X select prompt as an administrator.

    b. When the user account control box pops up, click on Yes.
    c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

    netsh int ip reset c:\resetlog.txt


    d. Note: If you do not specify a path of the directory for the log file, use the following command:

    netsh int ip reset resetlog.txt

    c. restart the computer.

    d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

    SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
    SYSTEM\CurrentControlSet\Services\DHCP\Parameters
    .

    e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

    Please post with the State of the question.

  • My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

    The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

    Hello

    1 did you change on your computer before this problem?

    2. What is the brand and model of your computer?

    Follow the suggestions and see if it helps.

    Method 1

    You can follow the procedure in the article.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2

    Check to see if the problem exists in the boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    See also:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Use Network Troubleshooter event logs to solve network problems

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  • Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

    Original title: Internet issues

    My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

    Hello

    Welcome to the Microsoft community.

    I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

    I would like to know the details below to help you better

    1. Do you receive an error message/code when you access Web sites?
    2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

    I ask you to try the steps in the Microsoft Help article below and check if it helps.

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

    Also I ask you to reset TCP/IP and check if it helps.

    How to reset TCP/IP using the NetShell utility
    http://support.Microsoft.com/kb/299357/en-us

    Keep us updated on the issue to help you better.

  • Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

    I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

    Hi William e. Swann

    1. what web browser do you use?

    Method 1:

    You can read the following article and check.

    You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

    Method 2:

    You can also read the following article.

    How to troubleshoot network connectivity problems in Internet Explorer

    Hope this information is useful.

  • Problem "there could be a problem with one or more network adapter on the computer?

    Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

    Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

    Hello:

    If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

  • Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

    My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

    I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

    I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

    I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

    I need step by step instructions on this Yes please treat me like a fool!

    Thank you

    Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

    After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

  • Error message 'Please select the access point or wireless router to set up' when you set up a network

    Original title: set up a network.

    I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

    But no device never appears below it, even after 90 minutes.
    Please help me with this.
    It was so easy in windows 7.

    Hi Manas,

    What is the brand and model of the Wireless Router/Access Point?

    Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

    Please check the links below on the implementation of a network.

    http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

    http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

    http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

    http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

    Answer please if you have any questions.

  • I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

    I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

    How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

    How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

    My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

  • There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

    I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

    There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.
    The device information
    Name: Microsoft Teredo Tunneling adapter
    ID: ROOT\ * TEREDO\0000
    Error code: 10
    Reinstall the device driver
    Completed
    There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.
    Problem with the PnP devices
    Detected
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Problem with anchor points, shifts vertically in the browser view. What is the problem?

    Problem with anchor points, shifts vertically in the browser view. What is the problem?

    have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

  • Problem with access policies (create several resources)

    I'm having a problem with access policies:

    The first policy must create a resource.
    And the following policies should create childs on the resource.

    The problem here is that when the policies will add the childs, the resource is not configured yet.
    And then each will create a resource but I want just a single resource of the childs.


    When the resource is already deployed, policies to update this resource correctly.

    How can I fix?

    TKS

    Ricardo,

    I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
    The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
    The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

    I hope this helps.

    See you soon

  • Problem with access: local only for wireless in Vista

    A few weeks ago, we got a new router at home. It works fine, but a few days ago, my computer suddenly could no longer access the internet wireless on this subject. (He had been able to before). Other computers in the House can use it for the wireless, and my computer can get on the internet by cable. My computer can also access wireless to other places, but not at home, and more.

    So far, I tried everything what I found on the internet to solve the problem without success. I tried:

    1. the solution proposed on this page http://support.microsoft.com/kb/928233.

    2. make sure that windows is completely updated.

    3 disable IPv6 and IPv4 (although not at the same time).

    4 turn off the power management feature that allows the computer to turn off the wireless card.

    5. disabling and re-enabling the network card.

    so far, nothing has worked. Can someone, please?

    Hello

    In most cases, this problem is created by the problem with wireless security.

    Try to connect with the security temporarily turned off.

    Or firewall blocking local traffic.

    Wi - Fi in general.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Problems with Realteck 8187 B wireless LAN adapter

    I am running Windows XP and since a month started having problems with my Wireless LAN connection. The installed adapter is a Realtek 8187 B. When I start the connection opens briefly, then begins to show the low connectivity with yellow dots under the icon on the status bar. Sometimes I have connection then connectivity closes its doors as soon as I pass my home page.

    Other times it falls back after about 5 minutes. I can usually clear it by restarting the computer sometimes twice. What I need to download an updated driver.

    Thanks in advance

    Jamie

    > Do I need to download an updated driver.
    I think you should check the portal Tosiba WLAN and install the latest version of the driver Windows XP Home edition. Do it first and check the functionality.

    Toshiba WLAN portal page is - http://aps2.toshiba-tro.de/wlan/

  • T400 problem with slow speed internet wireless. Help, please

    Hello

    Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

    Problem:
    upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

    I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

    OS: Windows 7
    Network cards:
    Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
    Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

    I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

    Wireless configuration:
    Wireless g connected to the modem access point high speed
    So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

    Thanks for reading this. I hope that some kind soul can help.

    pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

Maybe you are looking for