Similar Questions

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

  Hello

  I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
  "There could be a problem with one or more network adapters on this computer." Help, please!
  Thank you!

  Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• Problem with PCI device and network controller

  Hi, I have problems with drivers, I tried several but does not work. I have a laptop HP 2000 with windows 7 Ultimate 64-bit. These are the properties of hardware retail:

  Network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_520910EC
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  Help, please

  Thank you

  Hello:

  You need these drivers:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102008-1&cc=us&DLC=en&LC=en&OS=4063&product=5093394&sw_lang=

• Problem with the Compaq 6715 network s

  Dears

  I have compaq 6715 s running windows XP SP3

  I have a problem with my network connections, whenever I am connected via the LAN port Ethernet, wireless connection is automatically disabled and I can't enable it.

  is this normal or should I do something to use both connections at the same time to connect to two different networks.

  Thanks in advance for your support

  Hello:

  This is perfectly normal, and you can fix it easily also.

  Go into the BIOS and in the sub-menu of device configuration, modify the LAN/WLAN, set active to disabled.

  Save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  Now the wireless stays on when you connect by using a LAN cable.

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• Error: The service may be unavailable, or there may be a problem with your home when network equipment connect to games for windows live.

  Original title: the service may be unavailable, or there may be a problem with your home network equipment

  I just downloaded 'Age of empires online' and when I tried to connect to the game for windows live, he gave me this message:

  The service may be unavailable, or there may be a problem with your firewall or home networking equipment
  But I can connect to the game for windows marketplace app and on site. I also tried the solution given in other threads, but they did not work for me.
  my friend can connect to live in the game, but I don't even after that we use the same internet network. Also, I have authorized game through the firewall.
  I am using Windows 7 home basic 64-bit
  Can you help me please?

  Hello

  I suggest you to see the link:

  http://forums.Xbox.com/GFW/technical_support/connection_networking/f/265/t/8865.aspx

  If the problem persists, you can create a new post on the games for Windows forum here: http://forums.xbox.com/gfw/technical_support/connection_networking/f/265.aspx

  Hope the information is useful.

• Problem with PCI-GPIB card control Agilent 8648 D generator interface

  Hello

  I downloaded the driver Plug-and-Play (project-style) for Agilent 8648 A generator of signals. I use LabVIEW 2011.

  I open the file project and resource VISA name menu, select COM1. Note that I use 82350B of the PCI-GPIB Interface Card.

  I run the project, and I get timeout error.

  Is there a problem in the PCI-GPIB interface or am I missing something? I'm new to LabView and PCI-GPIB interface, and I'd appreciate any help.

  Thank you

  Nabil Gharib

  Given that you do not use a NI GPIB, go to MAX, select software and NI-VISA. In the right window, click the Options of VISA, and then select passports under general settings. Check on the passport of NI-VISA for Tulip.

  I'm assumimg you loaded the driver of Agilent and tested the communication with their software.

• Problem with 2 GPIB instruments

  Hello everyone,

  I work in a program with LabView 2015 this control 2 instruments, the Rohde & Schwarz Smiq02b signal generator and Analyzer of spectrum n9010a Agilent EXA. I use the cable Agilent - 82357 B USB/GPIB to connect my laptop with these two instruments (PC-> EXA-> Doganovic). I also installed the two drivers of instruments from their official websites.

  The program worked correctly until I had to format my computer and reinstall LabView but something wrong now.

  The problem comes when I run the program, is unable to initialize the SMIQ02b, the program stops and opens a new window of block diagram. This block diagram belongs to a block driver the instruments within this scheme, there is a VISA write flashing block.

  

  This only happens when I'm initializing two instruments in the same program, if I create a new VI and use the Doganovic only, I have no problem.

  I don't know what is happening, it is very strange that it worked well before, and now this happens.

  That's what I installed in my laptop:

  -2015 LabView
  -NI Device Drivers (included NI-VISA 14.0 and NOR-488. 2 14.0)

  -Agilent IO libraries Suite (configured as secondary VISA) 17.1

  -Passport OR VISA for tulip IT

  I'll be very grateful if someone could help me with this.

  Thank you!

  You set a breakpoint, it's what's causing the break.

• problem with printing on wireless network

  Hello. I have a HP psc 2410 all-in-one printer.

  I recently bought a modem router that has a function called "print server" and I decided to use this feature and print via wifi. I put it to the top, but with a problem. When I print something, for example, test page, instead of printing a page, it will print 'test page' on 3 pages (something like partial pages and the last = third page is printed without understanding) and then it freezes (the printer display says 'printing' and I have to cancel the job, otherwise it crashes and I have to reconnect it). I have this problem, not only in the test page but at least IE, office, PDF files. This concerns mainly the Wifi, since if I connect the printer directly to the PC or laptop via usb, it works quite well. also I tried printing with different laptops with wifi but no go. Here is more information that I have forget:

  (1) router is WPA - PSK encryption type.

  (2) there is no mac filtering or hide SSID passes.

  (3) a laptop and an iPad is connected to the router via wifi and a PC which is connected by a LAN cable.

  (4) the IP address of the printer, this is the same as the IP for the router settings page. (192.168.0.1)

  (5) I can't open the printer's internal web page by entering the IP address of the printer in the browser, since it is the same as the IP address of the router.

  (6) firewall on my computer (windows 7 32-bit) laptop is turned off and I don't use any anti-virus.

  (7) I tried PHYSICIAN analysis AND HP Print, but he says that the printer is OK.

  Thank you

  Leland

  EDIT: after studying for hours, I finally managed to get rid of the problem of gel. now, there is just one problem of this partial impression that happens by chance on wifi! I mean, it happens sometimes and sometimes not.

  any suggestions? I would really appreciate it

  The background is that this printer has no way to connect more than a straight USB connection.   In order to make wireless you have a device that will give him a network IP address.  The printer itself is unable to do this.

  The only way to get this printer on a network is to buy a SEPARATE USB print server.   Or, buy a router separate, as I said, that has a USB connection on the back which will have supported printers.

  You can not connect as you wish as it stands right now.

  However, call your ISP and have them set up IF their gateway device has a USB connection and really can support a printer.  That's their problem.

• problems with Windows 7 mapping network drive

  I bought a new computer to work today. It's a HP Pavilion Slimline s5220f. Works on Windows 7. All our other computers working under Windows XP. We have an external hard drive that acts as a file shared for the organization. (We are a small non-profit and rather rudimentary.)

  I have problems to connect to our "shared drive" - the reader 's' - where all our shared work files are kept. I have connected a hundred times on other computers, but can't seem to get it right with Windows 7... What I do usually it is right click on the 'my computer' icon and click «map drive network...» "Then I put in '\\filecabinet\shared' and he asks a log on and password... I checked the log on and password - everything is correct. When I enter the log and password, I get a message saying that "the specified network password is not correct".

  I spoke with two different people at HP. Nothing has worked. I really need access to these shared files in order to work. Help me!!

  After authentication on your Windows 7 computer, is there an indication of a field in the dialog box? (If not in a domain, your computer name is represented by a colon after it.) Well, if so, your computer tries to authenticate with domainname\username instead of only User_Name. It gave me trouble when authenticating to a SAMBA file server. Try plugging a "\User_Name". Your computer name should disappear when you type the backslash.
  Warning: this was tested on a Windows 7 machine company. This trick should also apply to Win 7 pro. I don't know about other editions if.

• Problem with the search for network path

  We have experienced a weird problem recently with our research. On a Windows 7 Machine, when you search for a file that is located on our file server, it will give you the files, but for ancient dates and not the most recent. In our case, when we find a file, I see the file is there but I do the search in the folder and it gives me no element matches your search if they have changed the 7/17 and later. Something before 7/17 is always available.

  I tried indexing, but I know that this will not work because it is a network location. Maybe is something that is wrong on the side of servers? This is a server of 2012. We have about 10 users affected by it, so the solution to the index of the network as a library location may not be enough and may just take us longer.

  Any ideas on if it's the workstation or the server? If so, what can be done to fix this? Any help is greatly appreciated!

  Thank you

  Andy

  Hi Andy,.

  The query is better suited in the TechNet forum, ask you to report the query in the following link to get the problem resolved.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Respond us if you have any technical questions and we will be happy to help you.

• the wireless signal coverage signal strength is good, but the problem with the health channel network overlap more

  Hello everyone

  In our project after the implementation of the wireless project

  I had done the survey for heatmaps wireless post

  I had signal strength is good for what - 67dbm for 2.4 & 5 ghz

  but the problem that i am facing with bad network health and overlapping of channel are more

  controller to change the autotunning for the channel for a floor for 2.4 and 5 ghz and some APS change us 2 emission power

  for a floor that we tuned we receive good channel and network health overlap report for combined 2.4 and 5 ghz

  but for the single report 2.4 and 5 ghz, report overlap health network and channel are not good

  postsurvey tools that I use for ekahau

  When I use the ekahau tool each time tool message upgarded last skip version or version

  for postsuvey basically for the heatmaps approved as

  1 power the signal should be-67 or de-65 dbm

  Support in this regard will be highly appreciated.

  Wait a second.  I saw this card before floor!

  Are there two of you working on this issue?

• Problem with LocationListener availability and network on Storm 9530 Simulator

  Having an interesting problem. I have an application with a locationlistener which works fine on "BOLD" and curve (Simulator and device) and 9500 Simulator. Try to make it work on a Verizon 9530. It * used * to work fine, but now the question I have is this: in the Simulator (9530-Verizon 4.7.0.148 and 9530-JRE that comes with the 4.7 eclipse plugin), if the CDMA network is turned on, I only get invalid places every 15 seconds. As soon as I disable the network (by unchecking it in the simulation/network properties dialog) I can get a good location every second, as it should. If I then select the network locations stop again.

  Pulling my hair out, any ideas?

  OK, solved my problem, I had the incorrect criteria to work with the Verizon Storm discovered. Yet, very strange behavior.