problem with automatic updates and Microsoft Update in Windows XP Service Pack 3

Similar Questions

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.

• I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  See the following topic for your question

  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa >

  06/25 / 1101:33: 43 pm

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Windows Update of Windows Vista Service Pack 2 (KB948465)

  After installing Windows Update Windows Vista Service Pack 2 (KB948465) my computer slowed down and
  I was not able to connect to my hotmail account.

  I uninstalled, or rather I went the restore point on my computer and uninstalled it.

  Why Microsoft comes up with these updates?  Very often, these mess my computer updates.

  Sincerely,

  Lucienne

  Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to update to Windows XP service pack 3.

  Original title: not updates

  I instaled windows xp professional sp2 and I can't update to sp3 install ie8 and other updates to windows, when I installed the updates, I have a message telling me that in my system, they cannot find the version of respecting my windows is in french

  Hello

  I understand how frustrating it is when you try to upgrade to Service pack 3 and you are not able to do. Do not worry, I'm here to help you with this question.

  I would like to know more information on the issue, so that we can help you better.

  1. do you get any error code or error message?

  2 have you made changes on the computer before this problem?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try to reset the Windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

  Method 2:

  Put the computer in a clean boot state, and then try to install the update. Placing the computer in the boot will help you determine which third-party program or an application is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  Method 3:

  Try the steps in the following Microsoft article.

  How to download Windows XP SP3:

  http://support.Microsoft.com/kb/322389

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Please reply with the status of the issue, so that we can better help you.

• Update for Windows Vista Service Pack 1 offerred repeatedly; have installed 4 times.

  Original title: vista service pack 1

  just reinstalled vista and sp1 only installs sound always on windows updates and I install it says his successful but while he appears again ive done four times now, and it is said in the history of the update I have four time but I know that its not install as its quick access

  I have will have to sp2 as well but can't get that until I get sp1

  Hi Joy,.

  Let us work together to solve this problem.

  During the installation of Windows Vista SP1, this problem occurs when a third-party application holds open a file or locks a file that the Service Pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. I suggest you temporarily uninstall any antivirus software and check if you are able to install the service pack. Please do not forget to reactivate once the process is complete.

  Method 1: Alternatively, you can reset Windows Update components.

  How to reset the Windows Update components?

  Method 2: I ask that you download and run the system update readiness tool and check if you are able to install the service pack.

  The system update tool

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  Method 3: I ask you to install Windows Vista Service Pack 1 Standalone Installer, in clean boot.

  Step 1: download Windows Vista SP1 from the link below depending on the Type of system:

  Windows Vista Service Pack 1 for Windows Vista 32-bit (size: 544,3 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 873,0 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&displaylang=en

  Step 2: Save the file on the computer and install it in the boot. Please refer to these steps to learn how to:

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

   

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please get back to us with the State of the question.

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• IF I UPDATE TO WINDOWS VISTA SERVICE PACK 1

  UPDATE WINDOWS VISTA SERVICE PACK 1 MESS TO THE TOP OF MY MODEM OR WIRELESS ROUTER? MY SON WILL BE VERY ANGRY AND I DON'T WANT TO SPOIL ANYTHING.  IS SOMEONE CAN PLEASE ME IF IT IS OK FOR UPDATE.
  THANK YOU FOR YOUR TIME.

  lesa60, with a bet major update as SP1, you must back up your data before performing the installation.

  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/kb/936330
  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update installed Windows Vista Service Pack 1 KB (936330) three times

  Although three times, Windows Vista Service Pack 1 has been installed, Windows Update still says it's an available update.  Information system does not indicate that it has been.

  What must I do to solve this problem?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• problems with automatic updates from microsoft

  have hp pc running xp pro version 2002 service pack 3, and when I allow the automatic update (kb2661254 or kb2749655 or kn2756822) to install the machine restarts.

  I try and install one at a time and each restarts the machine?

  Win update works better with ie8.

  one or more of your defenses can be cousing problems with updates.

  other updates at the same time comeing too can couse problems.

• Problems with the update of Windows on Windows 8 and also updated to Windows 8.1.

  Original title: update windows 8 to 8.1

  I really hate this computer is a laptop HP 2000 I got it from a friend and the place its been annoying the * out of me, I try to install the KB update, so I can skip all the other updates and I get an error of BS I use windows update, and I get 188 updates and when im installing the 180th update just white out and stops off the coast while he was on the charger, so I start backup it and now its stuck in an endless loop with the "configuration of the updates to Windows restore changes Failure" he was giving me an infinite loop of spinning points and all I want is to install windows on that 10

  Hi Giovanni,.

  Thank you for your response with the current state of the question.

  I suggest you try directly upgrade to Windows 10 of Windows 8 through the media creation tool.

  I recommend you to check the system requirements for the installation of 10 Windows on the computer.

  https://www.Microsoft.com/en-in/Windows/Windows-10-specifications

  Also communicate with the computer manufacturing and try to confirm if your computer is compatible to install Windows 10 or not.

  If your computer meets all the system requirements, I suggest to use the media creation tool in the link below and choose the option PC this upgrading to Windows 10. Before moving to Windows 10, I recommend you make a backup of important files and folders on the external hard drive.

  https://www.Microsoft.com/en-in/software-download/home

  Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

• I now have a problem with the update for Windows Live Essentials 2011

  I don't understand how it happened, but maybe someone could enlighten me?

  First of all, I was informed of an update for Microsoft Security Essentials. So of course, I did the update because I didn't want to be protected.

  I don't know if this is related somehow. I think that my update understood also as a Windows Live Essentials package. When I checked my e-mail and instant messaging, I noticed that the format has changed, and now, I think it's the new WLM 2011.

  It may seem very nice and put up-to-date, but it caused a series of serious problems for me. Let me explain:

  First of all, I must clarify that I am disabled and use the speech recognition, Windows speech recognition Dragon NaturallySpeaking both, because I can't use my hands.

  In the original WLM before the update, if I were using Dragon NaturallySpeaking, I was able to dictate with great ease and had no problem. If I wanted to then send the email I would say just 'send' and e-mail would go. With WLM 2011, if I say that now, it does not work.

  It's just a problem that I have. The next problem is much larger. In some cases, Dragon NaturallySpeaking speech recognition will not work and I can't dictate anything. I then have to close WLM completely and then open it again. Then only, it'll work. This happens many times and it's very frustrating, as you can imagine for someone like me.

  Forgive me for saying, it may seem very well with all the new bells and whistles there, but it makes my life a misery at the moment. In my view, there are a lot of bugs that need to be sorted out first with her.

  My question is, can I go back to the original WLM somehow until the update meets my needs? Can I go back to the status quo when WLM 2010 worked well with speech recognition for me?

  If so, can someone tell me how to do what you please?

  If not, then how am I supposed to use these features now?

  Thank you

  HB

  You will find support for Windows Live Messenger in these Windows Live help forums: http://windowslivehelp.com/forums.aspx?productid=2 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• y at - it an update for games of OBER and Microsoft version6.1 (build 7601: service pack 1) Solitare game?

  It seems to me that things that could be fixed with an update like: when there is absolutely no other movement in the game is as thought there is. If you ask a SUSPICION IT will BE ALWAYS LIGHT UP THE DECK. If I go back, even while moves away a 6 I still don't see it. So that tells me that there are no more moves to the left of the message should appear that is that!

  Please help makes me crazy!

  Hello

  (1) do you have made no changes before this problem?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Activate Windows feature market / stop

  Try activating Windows feature off and the switch turn it on and check if this is useful.

  To enable or disable Windows features, follow these steps:

  (a) click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  (b) to enable a Windows feature, select the check box next to the games feature. To turn a Windows feature off, clear the check box. Click OK.

  Later, turn it on and check if the problem is resolved.

  For more details follow the link below.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  In addition, see the article mentioned below that can help you.

  Where are my games?

  http://Windows.Microsoft.com/en-us/Windows7/where-are-my-games

  Hope this information helps.

• Problem with AMD update for Windows.

  I just installed MS update for AMD 7420 G graphics card and the original NIS and catalyst control down. I had to uninstall it to get the function. Does anyone else have this problem?

  HP pavilion g6-2225nr

  Earn 8 X 64 IE 10

  NIS 360 2014

  It is best to not have graphics driver updated MS Windows Updates. HP may have customized the drivers for your laptop. Get the right drivers from HP and install them. Note what you have by looking in Device Manager before you download drivers video material.

  You can also open the devices, display card properties, driver manager and back driver.