problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

Similar Questions

• It indicates a problem with your pc to restart, but it does not restart.

  

  I get this screen whenever I turn on my computer. It indicates a problem with your pc to restart, but it does not restart. it restarts only by its self if I click on stop down, so instead of closing, it restarts. I don't know how to solve this problem so if someone could help me that would be great.

  Original title: C:/Windows/MEMORY. DMP

  Thank you very much!

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  -Although they are the same bug verification, we have two different drivers, the origin of the problem. I'll discuss one both for ease of reading.

  1:

  BugCheck D1, {fffff980417c4f40, 2, 0, fffff880050324d8}

  1st argument is fffff980417c4f40 , which is the memory that has been referenced. Despite the memory be labeled as "invalid", it is really valid memory, but it is disabled on the swap file, so we cannot paginate it to 2/higher IRQL. Given we are at level 2 IRQL at time of the accident, the checked bug.

  3rd argument is 0 , which indicates a failure of the read as opposed to a write operation. In other words, that he was trying to read the memory, as opposed to write to it.

  2: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '1942faa8 fffff802' 6f4d2869: 00000000' 0000000 a fffff980 ' 417c4f40 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '1942fab0 fffff802' 6f4d10e0: 00000000 00000000' fffff980 '417c4ca0 00000000 00000000' fffff880' 1942fbf0: nt! KiBugCheckDispatch + 0 x 69
  "fffff880'1942fbf0 fffff880'050324 8 d: 00000000 ' 00000000 fffff880 ' 01e7957f 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff880'1942fbf0)
  fffff880'1942fd80 00000000' 00000000: fffff880 '01e7957f 00000000'00000000 00000000'00000000 fffffa80' 0a9a4230: tap0901 + 0x34d8

  ---------------------------

  2: kd > .trap fffff880'1942fbf0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 000000000000004c rbx = 0000000000000000 rcx = 000000000000032e
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880050324d8 rsp = fffff8801942fd80 rbp = fffff8801942fea0
  R8 = 0000000000000000 r9 = fffffa800a9a4230 r10 = 0000000000000002
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI ng nz cy
  tap0901 + 0x34d8:
  "fffff880 ' 050324 d 8 83bba002000000 cmp     dword ptr [rbx + 2A0h], ds:00000000 0 ' 000002-0 =?

  On the statement, that blame us, we doesn't have a subtraction to one operand of the other to compare if the operands are equal or not to a pointer stored in rbx. The problem driver in charge of this statement was tap0901.sys , which is the driver of OpenVPN.

  2:

  BugCheck D1, {fffffa80197fffff, 2, 1, fffff88006670927}

  1st argument is fffffa80197fffff, which is actually an invalid address.

  3rd argument this time also is 1 , which indicates a failed to write to this address.

  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff801'2f95b688 fffff801 308 c 6869: 00000000' 0000000 a fffffa80'197fffff 00000000'00000002 00000000'00000001: nt! KeBugCheckEx
  ' fffff801 '2f95b690 fffff801' 308c50e0: 00000000 ' 00000001 fffff801 ' 2f95ba58 fffffa80 '106fe000 fffff801' 2f95b7d0: nt! KiBugCheckDispatch + 0 x 69
  ' fffff801'2f95b7d0 fffff880'06670927: fffff801'2f95ba58 fffffa80 ' 107000 d 8 fffff801 ' 2f95bc30 00000000' 00000000: nt! KiPageFault + 0 x 260 (TrapFrame @ fffff801'2f95b7d0)
  fffff801 '2f95b960 fffff801' 2f95ba58: fffffa80 107000 d 8 fffff801 '2f95bc30 00000000' fffff801 00000000' 2f95bc30: bckd + 0 x 2927
  fffff801'2f95b968 fffffa80 107000 d 8: fffff801'2f95bc30 00000000 00000000' fffff801 '2f95bc30 fffff801' 2f95ba00: 0xfffff801'2f95ba58
  ' fffff801 '2f95b970 fffff801' 2f95bc30: 00000000 ' fffff801 00000000 '2f95bc30 fffff801' 2f95ba00 fffff801 ' 2f95ba58: 0xfffffa80 107000 d 8
  fffff801'2f95b978 00000000' 00000000: fffff801'2f95bc30 fffff801 '2f95ba00 fffff801' 2f95ba58 00000000'00000206: 0xfffff801'2f95bc30

  ---------------------------

  0: kd > .trap fffff801'2f95b7d0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = fffffa80197fffff = 0000000000000000 rcx = 7e2d6c3d0a970000
  RDX = rsi 0000000000000008 = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88006670927 rsp = fffff8012f95b960 rbp = fffffa80107000d8
  R8 = 0000000000000065 r9 = 0000000000000001 r10 = fffff8012f95bc30
  R11 = 0000000000000002 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl nz na po nc
  bckd + 0 x 2927:
  fffff880 ' 06670927 c60000 mov byte ptr [rax], 0 ds:fffffa80' 197fffff =?

  The statement, that blame us, we could not move a pointer that has been stored in the rax register. Rax has the wrong address in the 1st argument, which is fffffa80197fffff. The problem driver in charge of this statement has been the K9 web parental filter driver.

  ---------------------------

  So, what's the problem here? The problem is the way you have too much security going on and there are conflicts that occur.

  You have AVG safe Search + K9 + Norton web filter. Delete the first two and all should be well your VPN should no longer be crashing.

  If accidents continue, throw too Norton and replace it with Windows Defender for now. FWIW, I would never install Norton on my own home systems... I see it cause a lot of daily problems.

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• Drag / move - Boot Camp / VMware Fusion 2.0.4

  Hello

  While trying to find a solution for this by using the search function, I came to the top with the result. I have a Boot Camp partition running XP SP3 with VMware tools installed and am access this partition using Fusion 2.0.4. Everything seems to work very well outside this drag and drop does not work (it works for normal VMware images, however).

  What do I need to configure something special?

  Thank you

  ltsl

  ltsl wrote:

  I have a Boot Camp partition running XP SP3 with VMware tools installed and am access this partition using Fusion 2.0.4. Everything seems to work very well outside this drag and drop does not work (it works for normal VMware images, however).

  & Sliding feature is provided by VMware Tools, then the only suggestion I have is for you to uninstall/reinstall VMware Tools in the virtual Boot Camp Machine score.  To do this, while running the Boot Camp partition in a Virtual Machine and then click Start > Control Panel > Add / Remove Programs > VMware Tools.  After uninstalling, you can reinstall by selecting install VMware Tools in the virtual machine menu.

• Problem with windows using vmware fusion

  I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

  Thank you

  Debbie

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  I suggest you to consult the steps mentioned in the article:

  EXE by default association problem windows7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

  Hope this information helps.

• VMWare Fusion 6 upgrade does not load virtual machines

  I downloaded the demo for VMWare 6, and when I run it, it shows the two virtual machines, I have version 5.0.3, but they say just 'loading... '. "next to them. I never started.

  I have Debian 6 and haiku. They work very well in Fusion 5.0.3. I close them before trying to run 6.

  When I tried to make a new virtual machine, or to open, I get this error message (see image). Note that I have installed Cubase, and it should use the file extension .vmx for some of its files.

  I can't enforce existing virtual machines or create new ones. 5.0.3 continues to operate correctly.

  I have reproduced a problem with Launch Services, leaving the .vmx extension registered for Cubase and not save it properly for the merger. This is a problem in some Apple document standard loading of code that uses the Fusion. I will continue research on the differences between the Fusion 5 and 6 to see how to solve this problem. In the meantime, could you please try the following workaround?

  1 unregister Cubase of launch Services:

  /System/Library/frameworks/CoreServices.framework/frameworks/LaunchServices.Framework/support/lsregister u ' Cubase 7.app/Applications / ".

  2. run merge and make sure that it is able to create and power on virtual machines.

  3 re - record Cubase with Launch Services:

  /System/Library/frameworks/CoreServices.framework/frameworks/LaunchServices.Framework/support/lsregister ' / applications/Cubase 7.app.

  If you have another version of Cubase, or it is installed in a different location, you may need to change the path of the application accordingly.

• Problems with Satellite A300 - 1GC XP install - CD does not?

  Hello

  I have a few looks to round in various forums and found no answer to everything.

  I have the Satellite A300-1GC and had (from last night) vista on it. As caused Vista
  a lot of problems with different programs, I decided to get rid of him.

  The problem is now--if I stick my XP installation CD it it bed "press any key to boot from CD".
  Do that and then nothing happens. The CD read head stops going back and forward
  but nothing happens at all. Not even the beginning of the blue installation screen.

  Any ideas where this comes from?

  The CD-rom can also be run in AHCI mode (can a CD player what do I do?) and requires drivers?
  I have tried various CD XP - neither work. The last one I had was with SP3 and build in February 2009 so quite recent.

  Clues?

  See you soon
  Tobimaster

  Hello

  In your case the question has nothing to do with the SATA mode (AHCI mode or Compatible) but it looks like the CD/DVD drive cannot handle the Win XP disc
  Why? Who knows

  Always is it that the CD cannot be read and so the installation can not get.

  Try to copy this disc by using another computer and then you can try using the disc copied on order to install Win XP.

  Just FYI: I use TDK (CD and DVD) r discs... I am very satisfied

• problems with some Web pages won't load does not correctly

  I have had problems with pages loading correctly but have not been able to solve the problems. I also tried to create a screen shot without success apparently. It is with all Web sites are not only some here and there. Sometimes if I navigate to the power and return to this page, he can solve the problems but more often than not, it does not solve the problem. I also use another browser such as google chrome or firefox and not met the same problem. The same page loads correctly and as expected. I appreciate your help in this matter and I did some of the steps in the frequently asked questions and what you all have suggested to solve the problem as clear the cache, etc. in case of problems, but it does not permanently fix

  my Firefox isn't properly loading page please solve... example

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• Problems with the .exe file programs + System Restore does not respond when you click

  I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• What is the problem with new OS El Capitan? First does not work properly

  I just installed the new OS El Capitan, but first gives me a lot of problems. Preview works when I play timeline shape, but when I stop the video preview becomes kind of red with a lot of scratches. Another project does not recognize the clips on the timeline

  I'm in a deep deep deep Sxxx I need to work

  Here, the solution solved the problem for me, that sounds like the same problem I had.

  Re: Premiere Pro graphic problem?

  Best,

  Joel

• problems with windows vista 64-bit. I did not drive, the PC is HP brand,

  Windows does not start. a recent hardware or software change might be the cause.

  1 insert the disc
  2. choose the language
  3 click on repair

  If no disk so forth and so

  file: \boot\bcd
  status: 0xc000000f

  I can't access safe mode or recovery mode through the f - keys for some reason, the only things that I can get to are the installation and the bios screen. tried pulling the cord/battery and unplugging everything, even tried using WinRE neosmart but nothing not done, Im at my intelligence stop there...

  any suggestions?

  Hello

  If you do a cover, here is the information of HP:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• problem with scroll - the touchpad on my laptop does not work as it should.

  When I open anthing the page down to the bottom and I can't scroll to the top. I have to press the up button the page upward and sometimes that doesn't work. What ca I do t get it working again? The touchpad on my laptop does not work as it should. I should be able to press on and get my finger upwards or downwards and have the page up or dwn and this isn't. Please can you help me with this?

  In Winupdate settings provide "recommended updates" is disabled. (Allow the important updates)

  Go to your laptop manufacturers site, reinstall the touchpad drivers and graphics drivers

• problem with NFS MOST WANTED... car does not work well

  Hey... I installed NFS MOST wanted on my laptop a long time ago... and 2 days ago it was working properly, but now during acceleration cars, its noise is too loud, and it does not work well or normal...

  Nobody understand my problem... plz suggest me...

  Try a system restore to when it worked:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Check the reliability monitor to see what changed between where he worked and where you have noticed the problem:
  http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

  In particular, if there is no driver updates, try to back off:
  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

• is there a problem with dmhx wierless speaker jam? mine does not work and I am sure that they are correctly installed

  I installed dhmx jam wireless speakers in my windows of the bridge 8 and he will not play again

  Hi Jan,

  I understand that DMHX wireless speakers do not work on your computer Windows 8.

  1. do you get an error message when you try to use the DMHX speakers with the computer?

  2. What is the model of the enclosure of ham HMDX?

  3 have you tried to use these speakers with another computer?

  I would suggest trying the following steps and check if it helps.

  Method 1:
  

  Run the hardware and devices Troubleshooter
  

  a. press the Windows key + X and then clicking Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under hardware and sound, click on configure a device.
  NOTE: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:
  

  Check if the Bluetooth support Service is started by following the steps below:

  a. symbol Windows + R press keys simultaneously on and type run, services.msc, press ENTER.
  b. right-click on the Service of Support of Bluetooth and click on start or restart.

  Method 3:

  
  I suggest you to refer to the procedure described in the links for how to turn on Bluetooth.

  Why Windows is not find my device? :

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_4

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Add, view, and manage your devices and printers:

  
  

  http://Windows.Microsoft.com/en-us/Windows-8/install-view-manage-devices-Printers

  Configure your devices:

  
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Listening to your device via Bluetooth wireless

  http://www.hmdxaudio.com/Media/documents/hmdxaudio/instructionbooks/HX-P230_EN_IB.PDF

  If the problem persists, I suggest you to contact support HMDX.

  http://www.hmdxaudio.com/hmdx-support

  If you have any additional questions or for any question related to Windows, feel free to post. We will be happy to help you.

• Problems with FTP - connected successfully but the site does not update.

  Hello

  I was in need of an update to my site and see now having problems using FTP Dreamweaver CS4.

  I had to reinstall Dreamweaver on my system (as also, need an update). And had to remind myself of all the information that must be entered in Dreamweaver. However, this is not where the problem is, I can successfully contect to my host and load the files on the server, but then I reload my page of website and nothing has been updated. I tried numorus attempts to solve this problem on mine but without success.

  Is this a bug with CS4? Or should I use an external FTP program such as FileZilla?

  Any help would be appreciated.

  > Would it be the only thing that would cause me problems?

  No, it could also be your local site definition. If your local site root is set to the level of the fake, so files don't download to the right folder either.  Can you show us a screenshot of your local site definition?