Problem with CanoScan Scanner

Similar Questions

• Windows 7 problem with Kodak scanner i2420 - software Smarttouch

  Hello, someone had a problem with this kind of scan? On my desktop, there is a problem with smart touch, whenever I scan I have to restart or relog into a computer one then try again... Sometimes it works for a few hours, but sometimes I scan 1 or 2 pages and then stops scanning... The driver must have the connection, because there the scannner is a green arrow for connections... My computer is a HP and windos 7 Pro is instaled. I have checked the event viewer, but found nothing... I disabled the antivirus protection, but the problem is he stil... I know that this is not the right forum, I don't end protected by a kind of kodak support forum or something, maybe someone faced this problem?

  Thank you for your answer.e

  Hello

  Yes, you are right that this is not the right forum to ask about Scanner Kodak. If you were not able to find any support for Kodak forum so here are two links that might help you to achieve them and find answers to your questions.

  For the KODAK consumer product support

  Kodak FAQ

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• I was using WIA in Photoshop Elements because of problems with my scanner HP ScanJet sudden 4200C window. With the help of my scanner HP through WIA worked very well. Now I have problems analysis with either WIA or the window of the HP scanner.

  When I finally tried to solve the initial problem scanner HP in resettlement of the disk to scan, I kept getting the message that it was not compatible with Windows 95 or 98. But I have Windows XP.  So I finally downloaded and installed scanner drivers, software and upgrades on HP website. Well, the works of scanner, but now there are new problems.  1 - once the hp scanner window is displayed by clicking on import through Scanner HP, most of the menu at the top of the window items is not available. For example, I go to settings and all that is now available is to scan in color. There are 5 other options I should be able to click on, for example, resolution.  And I need that.  I thought, no problem, I'll just use WIA as before, as well as the WIA window came much faster than the HP one.  Problem 2 - in elements, I can go to WIA, but it says "NO compatible WIA devices have been detected."  That's happened?  I tried to go into Panel, scanners and cameras, add a device... but he could not find the scanner and of course, he cannot read the HP disc because of the inconsistent message of windows 95-98 (on my Windows XP computer!).  Can - I just uninstall my scanner and if I make the WIA will be able to find it after that?  I do not understand how I could use WIA and now I can't.  I know it has something to do with that I downloaded and installed at HP, but what?  I hope someone can help.  I have a huge project that I'm trying.

  Hello Hotrodgrandma,

  Thank you for your message.  It seems that when you have downloaded and installed the driver from the HP website, you cannot have downloaded and installed the updates as well.  Click HERE to open the HP website and download the appropriate files.  Below, I will give an overview of what you need to download and install in order.
  1 ScanJet 4200C/Cse/Cxi PrecisionScan LT software/driver
  2 HP PrecisionScan LT for ScanJet 4200 c Scanner update. This update allows the parser to work under Windows XP.
  3. all three updates, in no particular order.
  Please let us know if this is or is not to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the scanner Laserjet M175nw and OSX Mavericks

  I just upgraded to the Mavericks of OSX. My HP scanning software seems to work with my Laserjet M175nw until I have save the file and then a lot of the right side of the document is cut off.

  Everything worked fine before that so it seems to be a driver problem. HP is aware of this? If so, when you set?

  Hi marineseen,

  Just a quick update of good news!

  I wanted to let you know that the full feature software and driver for Mac OS X 10.9 Mavericks for your printer has been released.  I included the link to the driver download page for easy reference.

  HP Laserjet Pro 100 color MFP M175 Pro full functionality Solution - OS X 10.9 Mavericks

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=kJ-125719-1&CC=US&DLC=en&LC=en&os=4159&Product=5076465&sw_lang=

• computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

  tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

  Hello

  I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  After you have installed the camera, please check in the folder C:/Program files if it shows there.

  It may be useful

• OfficeJet Pro 8600 Premium on Mac OS 10.6. Two problems with the scanner.

  1. for the use of ADF for scanning, the charger will pick up paper when "scan to PDF" but not what 'scan to JPEG.  New unit fresh out of the box today.

  2 PDF scans do not pick up color - out as shades of gray.  JPEG scans are very grainy and faded.  Are there settings to correct these problems?

  Items 1 to 7 solved the prob of color PDF.  Re the jpg, tho, the 'source' bar is gray, but indicates 'flat', which explains why the ADF has not been activated!  Change JPEG format 'Type' 'Document' (the default value) 'Photo', the Source became automatic and gets the ADF will!

  All right.

  Thank you, Shlomi.

• Problem with HP Scanjet G3110

  I have a HP scanjet G3110.

  Worked fine until four days ago. Spent an hour on the phone with technology HP trying to solve the problem. There is no problem with the scanner. There were hooked up to a laptop and it works fine, but it does not work with my desktop computer.

  HP said that there is a problem with the operating system is Windows XP. The program seems to install fine but when I use this error Message says that the "imaging device is not found.
  Extended error information are 8, 10-2147221502

  Thanks for your help.

  Hello Kasomor,

  Thank you for your message.  Given that this device was working well four days ago, let's try a system restore.  Click HERE for the system restore instructions.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

  Hey folk,

  I have a problem with my HP L7680 AIO.

  I did an upgrade to 8.1 Windows x 64

  I have install the driver real 14.8.0 version.

  The printer works but the scanner hurts.

  When I begin a scan I get an error message and the scanning process is cancelled.

  I have this error message with photoshop, HP solutions and any other scanner software.

  Printing HP and doctor Scan says I have to contact support.

  Here I am all idea?

  Either way, I disabled my Antivirus software during installation.

  Thank you very much.

  Greetings

  Markus

  Hello

  I solved the problem by myself.

  For people who have the same problems...

  It was the prevention of intrusions by more Portscanner antivirus.

  I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

  The fool is the AV-Suite of disabling showed no effect.

  Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

  Things difficult, but now it works...

  See you soon

  Markus

• Printer HP 4500 color scanner: Fixed problem with no detection scanner on Mac 10.6.8

  At the time I upgraded to Panther snow, I experienced a loss of use of the function scanner on my printer HP 4500 scanner so that I am able to use the printer function.  I was advised to try to solve the problem with a Capture of Image Download.  Where can I get the right version and how should I proceed?  Is it free?

  The communication problem that prevented initialization of the printer by the CCM has been resolved by removing the plug from the printer into a power strip and attaching directly to the socket in the wall.  Thanks to the Member who posted the idea.

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Problem loading the scanner progam

  My desktop (Vista) does not recognize my new CD of scanner (CanoScan 9000F) program.  No Autorun and the file does not appear.  My laptop (Win7) shows all the files correcly, including AutoRun. The displayed files on the drive CD of my desktop are completely different from those displayed on the reader of my laptop using the same disk progr. I had the same problem with other programs.

  How can I get my desktop to recognize the program on the CD?

  You could try to go to the manufacturer's Web site for the scanner and see if they have a Vista-specific software that you can download.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  My desktop (Vista) does not recognize my new CD of scanner (CanoScan 9000F) program.  No Autorun and the file does not appear.  My laptop (Win7) shows all the files correcly, including AutoRun. The displayed files on the drive CD of my desktop are completely different from those displayed on the reader of my laptop using the same disk progr. I had the same problem with other programs.

  How can I get my desktop to recognize the program on the CD?

• I had a few problems with the search engines and history

  My default search warning back to Yahoo after a reset on my computer. Close Firefox keep one to change but by restarting the computer, it takes.

  I can't open the sidebar history. The option "view the history of your" opens its tab fine (the drop-down menu that says 'Show History Sidebar', 'clear recent history... ("ect.). But, when you click on the "Show History Sidebar", nothing comes. Can I use the "Show history" option, but the sidebar does not open for some reason any.

  I just finished with a complete analysis of the Microsoft Safety Scanner and it said not that there is anything wrong. I have not reset the computer again to see if something has changed although after the factory reset (see the 2nd paragraph) it seems returned to Yahoo (search engine he kept going to happen).

  I open the history tab in the menu of the toolbar, and everything seems fine here. I also had him always use private off all first browsing mode. After activating the option clear history when Firefox closes, I ended up having to reset to factory settings (things he saves were saved isn't really a problem) that doesn't seem to fix the problem with the sidebar of history not to come.

• I can't access some websites using Firefox. For my own site, I get "file not found". My Yahoo downloads in the form of text. No problems with browsers IE or Chrome

  I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted and reinstalled Firefox and it has not solved the problem

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked