Problem with characters special keyboard HP Pavilion DV6-3004TU

Similar Questions

• Problem with the HP on a Pavilion DV6-6013tu wireless Assistant

  I have a Pavilion DV6-6013tu using windows 7-64 bit operating system.

  For some unknown reason, this morning, I started to get the error message 'Wireless information not available' and also the message that the application will now be down.

  When I try using the control panel to open the HP Wireless Assistant, he refuses to open and after a long period comes up with the error message above as well.

  The blue light is on the f12 key and I can connect to the internet via my wireless modem router.

  I can also print via my wireless printer.

  Can anyone help?

  HP support have forced me to down load an updated version of HP Support assistant, who made no difference what so ever.

  I can see the point HP wireless assistant in programs and features (via Control Panel), but until I can get a new update so that it won't move forward to remove it.

  HP support say jut ignore the error message and continue to use the computer!

  The laptop is not another year and I expect them the advice they gave me constructive assistance.

  Anyone out there can teach an old dog new tricks, short easy to understand steps even if, as I am not tech savvy at this stage in my life.

  Thank you.

  Part of HP software update would still be a wise thing to do.

• Problems with HP Simplepass 2011 - HP Pavilion dv6 Notebook Windows 7 64 bit

  HP Pavilion dv6 Notebook Windows 7 64 bit

  I have this laptop about two years. I had have to rely on the factory affecting several times on circumstances independent-(donjon de Norton Utilities supprimant les registres essentiels). But, recently, I restored to factory setting and updated my Norton Internet Security to the latest version and everything was fine until my fingersensor stop Saw several hours after. He reads is no longer my fingerprint.  I am prompted by the software to enter my password by typing only and not in the typing and scanning. Right now my quick launch is based on numbers from 0 to 9. Can someone guide me to recover my software working properly?

  You can try to uninstall the driver and the software for Simplepass, then re - install, refer to this guide

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• Keyboard HP Pavilion dv6-3012eg

  Hello everyone,

  I have some problems with my computer keyboard hp pavilion laptop (or with the behavior of the keyboard).

  I can't use for example ALT - F4 to close windows as on other laptops. Using the combinations with ALT or CTRL or use a function key, I also have to press the "fn" - key. for example: fn-ALT-F4 to close a window.

  It seems that the fn key is enabled when it is not pressed and turn it OFF when you press.

  How can I disable this?

  1) press the power button to turn on the computer.

  2) press the f10 key to open the BIOS Setup window. Then select the option in the system setup and you will find an option that said option keys mode and then press the Enter key to display the enable / disable menu.

  

• Backlight keyboard HP Pavilion dv6-6b96ex

  Hello

  I need to ask questions about my backligh of laptop keyboard (HP Pavilion dv6-6b96ex), a know if my laptop work backlight keyboard or not?

  I try every thing to turn on the key board but it does not work!

  any help, please

  Hello

  Looking at the specifications Page for your laptop, it is not listed as coming with a backlit keyboard - that would be normally provided under documenting the keyboard.

  Kind regards

  DP - K

• HP Office jet 4635: help! Characters special keyboard

  Help! I just moved and trying to setup a wireless printer to print from my phone/tablet, but the password for my new wi - fi contains these special characters: +,?, =. My keyboard does not display these options for enter the password so I can't connect. How to enter or may enter a password that contain these special characters?

  Hey @KristenMC,

  I understand that you have some problems with your Officejet 4635 e-all-in-one printer connection to your new router. I can help you with that.

  Special characters are located on the Star (*) and pound (#) key. If you press one of these keys they will scroll many special characters. If you make a mistake, then you can press the buttons arrow to go back a back space.

  Please let me know if you have any other questions. If not, have a great day!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• Keyboard HP Pavilion dv6 Notebook slow

  Problem: laptop keyboard responds slowly (keys but appearance on screen lags obviously) and hangs intermittently for 1 or 2 seconds.

  Note: The TouchPad works very well.  External wireless mouse works fine.

  Computer:

  Product name: HP Pavilion dv6 Notebook PC

  Model: dv6-6c14nr

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i5 - 2450 M 2.5 Ghz

  12 GB OF RAM

  13 months old; out of warranty by 24 days

  What has been done:

  Cleaned vents with the empty (very little to no dust)

  Battery removed (no power supply) for 10 minutes, reinstalled and restarted

  A ran Malwarebytes Quick Scan freeware;  No problem

  A ran Malwarebytes Full Scan freeware;  No problem

  Avast ran full system scan freeware: no problem

  Ran CCleaner

  Ran Glary Utilities 3

  Ran Spybot 2.2 removed 15 rejected

  A ran chkdsk c: no problem

  Different system restore ran 2 points without change

  A ran MemTest86 + Pass

  Remove temporary internet files

  A ran SFC/ScanNow No. questions

  Unchecked sticky keys

  Set up sticky keys 5 x Maj unchecked

  FilterKeys uncontrolled

  FilterKeys implemented 8 s Maj unchecked

  Manager, uninstalled keyboard.  Rebooted, auto reinstalled system keyboard.

  Installed HP updated to Touchpad - sp40983.exe - no change

  No updated HP update available for keyboard specifically

  ANY help - in particular a working Solution - would be most appreciated!

  Thanks in advance!

  Here is the solution!

  Run mssconfig.exe (click the Start button, type msconfig, click msconfig.exe)

  On the STARTUP tab, disable all programs except those required for your computer.

  In my case (HP Pavilion dv6 Notebook) the following programs have been enabled (checked).
  Synaptics Pointing Device Driver<= the="" latptop="" key="">
  IDT Audio of PC<= the="" laptop="" sound="">
  HP CoolSense<= the="" laptop="" temperature="">
  MS Security Client<= microsoft="" security="">
  MS SkyDrive<= microsoft="" on-line="">

  EVERYTHING has been disabled (unchecked)

  Then I restarted the laptop.

  The keyboard problem has been resolved and is been solved!

  I learned from a friend of tech support that all other startup programs no longer of
  grains which are responsible to speed up loading of the program if you want to use.
  Deactivation of these nuclei may be added 1 or 2 seconds of loading time.  And frankly, I
  did not notice any delay at all when I called is no longer in a program that has been pre-loaded.

  Obviously, one of the nuclei was causing the keyboard problem.

  Total time invested; fifteen minutes.

  Better that HP wanted to load to "clean" my laptop at $99!

• Problem with the BIOS of the Pavilion dm4-3002sa bought in Belgium

  5 months ago I bought a Pavilion dm4-3002sa (English version) in Belgium, where I live (to have a QWERTY, AZERTY keyboard like most laptops sold in Belgium). I discover now that this particular model is not recognized on the Belgian support HP web site - I could only find it on the web pages of HP UK.

  A month ago I started having repeated problems (automatic stop & restart every 3-5 minutes), which indicates there is a serious problem with my BIOS. The test of memory fails.

  I contacted HP support Belgian and send the laptop for repair (they said that they will replace the current memory).

  HOWEVER, I have another question: If the problem is caused by an incompatibility possible download relative to the BIOS here in Belgium, while my HP laptop is clearly a UK version and not recognized as a model sold in Belgium?

  If so, this means I can continue to have the same problem even after service.

  Registration of the laptop as based in the United Kingdom would be a solution? (i.e. regardless of my address of residence...) So that the updates & downloads are fully compatible with this model?

  A big thank you to the one who can help me!

  The problem of restart is much more likely to be associated, in view of the results of the test of the memory of the memory. You should have asked to send remembrance to you, rather than send the laptop away. Memory modules can be customer replaced. It is quite easy to do.

  The only real difference between having a QWERTY keypad and a QWERTY keyboard is the way the operating system sees the way in which the keyboard as being mapped when you choose the keyboard layout.

  Your computer laptop dm4-3002sa is still a laptop HP Pavilion Beats Edition entertainment as well as the USA (United States (version.

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.

• BIG PROBLEM with Dell Laptop keyboard - CONTROL seems to be stuck

  The CTRL (left) seems to be stuck in a way. Not like in the operating system that you are stuck where you cannot open stuff but physically. It works and everything, but when I press on the edge of the lower left there feeling like it won't go down any further. Now here's the thing
  I had the EXACT

  Same problem with my ALT key on the top right corner, after hours and hours of press here and find good... The point 'G' {in this term well say it means good} button, who fixed it, but now I have it again with the CTRL key

  and when you tilt your head to the level of keyboards and press gently on the left-hand side of the CTRL key, you will see the L. R left side down and the right side is not, but if I do it with another key to sound normal, balanced sound, pressing on anywhere will descend the whole key.

  Sorry to be paranoid, but it drives me crazy, I don't want to send it in for repair, I tried to drag the undernath paper, there is no food or anything there, I never eat near my laptop - and I tried to suck with vacuum on LOW Power and a sliding brush. Nothing came out. Don't know what to do.

  Any help would be appreciated.

  It won't go down, he's going like halfway and feels more difficult to drive, and I don't want to break it.

  Hello

  There seems to be a hardware problem, I suggest you to contact Dell for assistance.

  http://support.Dell.com/

• problems with partitions - help please. [Hp dv6 2135sl]

  Hi all! So, I'm first of all I apologize for my English Italian.
  I bought a laptop HP dv6 2135sl with Windows 7 and I have a problem with the partitions.

  The partitions are all primary and the order is the sequent:
  C (450 F)
  tool HP (99MB)
  recovery (16GB)
  Sistem (199 MB)

  I would decrease C up to 50 GB and create two other partitions: J (programs 150 GB) and K (250GB of data). Is this possible? I realized that I have to change one of the 4 partitions in scope. What is the best? (Partition Wizard report an error: "no free slots of MBR"). Can I still use PM or I need something else?

  PS: Cannot use Acronis (not supprt W7) and if it's possible I won't use Gparted because I'm a noob; )

  Thank you all!

  I found a solution:

  I used the tool of W7 to handle the drive. I have create a 270 GB partition (the maximum allowed this program), then the disk was converted from basic in dinamic one disk. I opened the Partition Wizard, I turned the disc in the base. As if by magic, I found recovery logical (previously primary). Now I am able to create the partition n!

• Problems of USB 3.0 on Pavilion DV6

  Hello

  IM currently problems with my 2 x on my HP DV6-6c56ea 3 USB ports.

  When I plug in a hard drive in the 3 USB ports, it will be intermittently quit and restart. for example if I copy something it stops at halfway with a mistake and then the AutoPlay for the hard drive will again appear as if it is just attached. I've tried more than one hard drive and same thing happens, but if I use the USB 2 ports it works fine.

  Also, when I attach my iphone via usb 3.0 ports itunes does not recognize it but it works on usb ports 2.

  Im running windows 7 64 bit.

  Any help would be appreciated.

  Thank you

  We need to look into Bus USB controllers in Device Manager and tell us what's there.  For example, weird brands or messages? You run the original Windows installation, or has she been charged at some point?  He could not hurt to reinstall the Intel chipset and the controller driver of Fresco Logic USB 3.0 under the category "chipset" here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218566#N282

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• Problems with activation of virtualization in BIOS dv6

  Hi, I bought my new lap top about 1 month now and im seem unable to find the option to turn virtualization technology in my lap top via the bios settings, I really need to run VMware for my studies needs. my upper turn specification is:

  HP Pavilion dv6-6007tx notebook PC

  Intel Core i7-2630QM CPU @ 2.00GHz

  8 GB RAM

  Radeon (TM) HD 6770 M

  System BIOS F.06

  any help would be appreciated

  EDIT: I forgot to mention my operating system

  Windows 7 Professional 64 bit

  I installed this version and it seemed to fix on my system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94786-1&LC=en&DLC=en&cc=us&OS=4063&product=5103993&sw_lang=

• Characters special keyboard

  Hi all

  I recently bought an end of 2013 mac book pro and I'm having a particular problem. When I hold shift and numbers on the top row, the wrong characters are displayed. Now, I know most of you my point to the keyboard input source, or preferred language options, but I tried several times already. In addition, I tried a new install of OSX and still, the same things happen.

  Making it a little more annoying, is that my keyboard works fine in my VM Win7 on Fusion 8 on the MBP even. Weird right? Although these conditions lead me to believe it's a software problem of some sort.

  Any assistance anyone can provide would be greatly appreciated.

  -Tom

  TomTheWicked wrote:

  When I hold shift and numbers on the top row, the wrong characters are displayed.

  Exactly what is the sequence you get instead of the standard (for US) of! @ # $ % ^ & * ( )    ?