Problem with connecting to the DB

Similar Questions

• Problem with connecting to the external server

  I am currently using my iMac with Mac OS X Lion 10.7.5 2011 (11G 63). I have an external server connected to the PC of the window. I tried many times and many ways and yet the error "There was a problem connecting to the server" continues to appear.

  I checked:

  -IP address
  -No firewall
  -Access rights
  -Address external & directory servers

  I used my other new imac and macbook and they have no problem connecting.

  Is this an error in version?

  Please do help.

  Read this article on the basis of knowledge of Apple, there may be something you've missed.

  OS X El Capitan: connect to shared computers and servers for files on a network

  Also this...

  OS X El Capitan: to connect to a Windows from a Mac computer

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Problems with 'Connection to the Site target' where is the log file?

  Hi all!

  I am VSphere replication deployment to 2 VCenter servers with 1 Center Server in a lab environment. I successfully deployed and saved VRM devices to both VCenter servers. I also installed the SRM agent on the same VCenters servers as well. Both plugins are appearing in both VCenter servers. When I try to connect to the site target either VCenter, I get the following error below after I click 'OK '. What log file should I look at to determine my problem?

  

  I solved this problem today.

  I had the two configuration of VCenter servers for both use TCP 8080 for HTTP traffic, I have uninstalled/reinstalled VCenter at both ends. I accepted the default 80 TCP HTTP this time and I was able to connect to my remote / targeted VCenter in the connections section.

  What is strange, is that the VRM devices said they used TCP 8080 to save the VRM instance/database on the Service Platform controller (VCenter) and recorded everything very well. I was able to perform very well with configured TCP 8080 local replication.

  My company has sometimes display TCP 80 a vulnerability and try to use other ports where possible.

• problem with connecting to the service of the administration of essbase

  Hi guys,.

  I have a problem with connectingto essbase administration service using the regional service console.

  There is no place of change taken on the essbase server.

  in the regional service console, clicking the server management component, I can find the essbase administration service is not running.but that will well essbase studio

  My essbase cube is used to be the source of OBIEE data. Now, I can not connect to the service of the administration of essbase, but the POET can read data in the essbase cube.

  Someone at - there experience this problem?

  any suggestion is appreciated!

  Hello

  Try restarting the Service of Directors.

  Kind regards

  Manan Shah

• Problem with connecting to the usb storage to the EA4500 via ftp from the internet

  I have trouble to configure my EA 4500 as an FTP server.

  I followed all the instructions according to the manual, but cannot access the USB I connected tot the EA4500 of the internet.

  When I try to connect my own network, everything works fine.

  The configuration I have at home is as follows:

  Cable modem ISP--> EA4500--> all computers.

  As said, I use the EA 4500 as an FTP server.

  If I install an FTP server on one of the computers on my home network and transfer the correct port on the EA4500 for this PC everything works fine and I have access to the internet. Unfortunately, it won't work when using the USB plugged into the EA4500...

  Any help would be great!

  TIA!

  When you go to the EA4500 configuration page, have you enabled the FTP server function?

  When I set mine up, I have was go the section when you set up the USB (shares, etc.) and turned on FTP.

  In the security of the router Security tab, I uncheck the 'Block anonymous Internet requests.

  I do know for sure that you have to uncheck this box, but I always turned off this box, just out of habit when setting up a llinksys router.

  In any case, this is what I did and it worked fine.

  The only other thing I can think is... Your modem is perhaps a nat router. And you have the EA4500 operating on a different subnet. And your modem may possibly be block it.

  What is the brand and model of your modem.

• Problem with connection of the external hard drive.

  Hi, my laptop runs Vista Basic. Recently, when I plugged a disc external HARD to 3.5 inches on the PC, I can only read the files on the HARD drive for about 5 to 10 seconds before receiving an I/O device error message.

  I don't know if it is a hardware or software problem.

  What can I do to solve the problem?

  Thank you.

  Hello

  Please contact the Microsoft Community.

  I'll help you with the problem. Please answer these questions in order to get clarity-

  (1) what is the exact error message?

  (2) deal with a similar problem on another computer

  I'd like to have you go to Windows Update, download and install optional updates in the list.

  Note: The hard drive must be connected by.

  In addition, you can also view this article to check for errors on the hard drive-

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: It is possible that you may lose the data on the hard disk after performing the chkdsk command. Make sure that you back up the data before continuing.

  Know let us know how it works for you.

• problem with connection to the playbook Simulator Web Inspector

  Hello

  I get all the outputs to Web Inspector. I am able to properly connect Web Inspector to my application, but I'm getting no output to the console.

  This problem seems to have started when I upgraded my simultor OS 2.0 beta to version of the OS 2.0 gold.

  Any ideas?

  Thank you

  Solved by disabling the cache of Safari.

• VS 2010 problem with connect to the database.

  Hello
  
  
  I use the customer Oracle 11g and ODAC 11.2 Release 3, windows 7 and VS 2010. Durning a few days I can not connect to oracle because of error database: "OCIEnvCreate failed with return code-1, but the text of the error message was not available.
  I checked the case with privileges, and that's ok. In the end, I reinstalled VS and oracle client, but it did not help.
  I have no idea what is wrong: () thanks for any advice.
  
  Kind regards
  Kris

  858115 wrote:
  Hello

  And if I find 'oci.dll' in a location different than oracle home, I should remove it? I found one in c:\windows\system32

  Kind regards
  Kris

  For now, go ahead and rename it. Since SYSTEM32 is on the path, the dll may be getting picked up rather than the version 11.2.

• problem with connection to the db - connection error

  I have problems connecting to my database. What I am doing wrong?
  
  I used dreamweaver to create the connection.
  
  < %
  ""FileName ="Connection_odbc_conn_dsn.htm".
  "Type ="ADO. "
  "DesigntimeType ="ADO"
  "HTTP ="false"
  "Catalogue =" "
  "Schema =" "
  Dim MM_webApp_STRING
  MM_webApp_STRING = "dsn = Web app; UID = sa; pwd = sa; »
  % >
  
  
  Error type:
  ADODB. Recordset (0x800A0E7D)
  The connection cannot be used to perform this operation. It is closed or invalid in this context.
  / new impulse nc site/htm/upcomingEvents.asp, line 19
  
  My asp code:
  

  I solved the problem. Thank you!

• Problem with connecting to the computer

  Look at this schrinshoot! my computer does not see a sansa correctly. And sansa updater does not see a firmware update.

  

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99