Similar Questions

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• Unable to connect to the Internet after installing Windows 7 Ultimate

  Hi, I installed a new Solid State Drive and with it, a new copy of Windows 7 Ultimate.
  
  The original HP Pavilion Slimline s5-1114 supplied with Windows 7 Premium. After installation, I was able to install these drivers HP:
  
  57372 - management Engine Interface

  57417 original Driver Chipset

  58919 HP Support Assistant

  65305 - Diagnostic hardware PC

  However, the computer gave me an error for these drivers, claiming that my system did not meet the minimum requirements:
  
  57359 - network controller

  58084 - wireless Controller

  59644 USB Controller

  57493-

  57506-

  57362-

  Any suggestions on getting this computer connected to the internet? Right now I am trying to connect via a cat5 cable, and then once it's upward and running, maybe a wi - fi connection. One step at a time...

  You are the very welcome.

  OK, if your model is not a wireless card.

  Need you these two devices what to consider?

  These drivers should work...

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-97536-1&cc=us&DLC=en&LC=en&OS=4063&product=5157057&sw_lang=

  PCI Simple Comms:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105636-1&cc=us&DLC=en&LC=en&OS=4063&product=5265252&sw_lang=

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• How to install windows on a new hard drive

  I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

  OT:

  Windows 7 home premium edition

  You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Unable to connect to the internet after installing updates

  Original title: I can't access the internet after running the latest updates! Please notify.

  I can't access the internet after you run the last update! Please notify.

  Hello

  1. What is the error message that is disayed when connecting to internet?
  2. what type of internet connection do you use?
  3. Please post the KB number that was finally installed update.
  Please follow the links below to elp solve the problem.
  Method 1
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2
  Start the computer in start mode minimum avod conflicts with third aprty software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: When you have done all the troubleshooting steps, follow step 7 of the article mentioned above to start the computer in normal mode.
  You can run this tool and display the results.
  
  Internet Connectivity evaluation tool
  
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
   
  Method 3
   
  Step 1
   
  Start in safe mode with Networking if you have awired connection and troubleshoot completed the question.
   

  Description of the safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Step 2

  a. turn off your antivirus software and firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  b. disable your firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• Unable to connect to the internet after installing the update.

  Whenever my computer downloads this update I can't connect to the internet.

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB980182)

  If I uninstall it I connect without a problem.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Installed Windows on a new hard drive with an old processor, the video controller, there are no drivers

  I have an old optiplex Gx280 dell and she had a damaged hard drive. I didn't need anything out of it so I got a new hard drive from Seagate internal tb and install a new copy of Windows 7 ultimate on it. I have updated all drivers for obtained with the exception of my video controller. Since then, I've used about 200 GB of space on it from the information that I want to keep, but apparently the drivers because this computer does not exist for windows 7. What should I do?

  Standard-Intel915G/915GV/910GL VGA graphics card
  Hardware acceleration is completely upward
  Dirctdraw, Direct 3D is not available

  If you can't find a driver update, you can try installing the driver in compatibility mode ' old'.  Simply right click the Installer do > properties > compatibility mode > choose OS

  Good luck

• install windows on a new hard drive

  Hi, my laptop has been commissioning so I bought a new hard drive and installed myself. The problem is that I don't have the recovery disks that came with it when we bought it. How can I install windows 7 or vista on the new hard drive.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Install windows 7 on new HARD drive without dvd/usb?

  I have a laptop (windows 7) which is the HARD drive has failed. I want to buy a new HARD drive and replace the failure, but I have no DVD or USB with windows 7 to install on new HARD drive. I have the product key on the lower part of the machine.

  Could someone please offer some advice on how to go about loading the operating system on the new HARD drive. Thanks in advance.

  Hello

  You will need to make a DVD or USB key to reinstall the operating system or of order recovery disks

  You can contact the manufacturer of your laptop and ask them to send you a set of recovery disks.

  Manufacturers that make normally for a fee.

  ________________________________

  Or download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  The COA sticker is either on the underside of the laptop or in the battery compartment (you did already).

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• I need help my pc does not connect to the internet after installing updates

  My internet does not work after you install the updates so I uninstall and they work fine.

  It happens all the time as I paid for the program and downloaded on my PC and they need to access the internet at work and when I click on it it say failed to connect or unable to connect to what happens with that?

  I downloaded mozilla fire fox and that no longer works and the same for IE8 after instalation my internet does not work why?

  I need serious help to what I at least need these programs, I bought to work.

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  OR

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows on a new hard drive while maintaining the files on the old?

  I have Windows 7 64-bit on my stock 500 GB hard drive. I have a 64 GB mSATA which I would like to do a clean install of Win7 on. Regarding the 500 gig HD, I would like to wipe and partition (it is loaded with bloatware and probably malware) but if possible, I like to keep a few photos and mp3s. I have to wipe everything, or can I just install Win7 and start-up of the SSD, then delete what I want on the other hard drive?

  I suggest at the very least, you back up your personal folder in C:\Users\Your_AccountName on a hard drive external.

  Proceed to install Windows 7 on SSD, reactivate so you keep the 500 GB attached as a slave drive and format it. You could even redirect your personal folders to it after formatting it.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  How to redirect your personal Folders in Windows 7 : Notebooks.com

• Cannot install Windows 7 on new hard drive, it says that it cannot parition it nor did he have any predefined partition.

  Original title: I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd.

  I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd. . The hard drive was dead, so I have to load windows from a flash drive. I am trying to load windows 7 on the new drive, but the software does not recognize.  It is said that he can not parition it nor did he have any predefined partition. Anyone out there have any suggestions? When I try to find a driver there doesn't seem to be all for this issue. Any suggestions will be appreciated. Scott

  Hi Scott,.

  The cause of this issue with all of the troubleshooting steps to resolve this problem, are suggested in the link mentioned below. Please refer to him and check if it helps.

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2.

  http://support.Microsoft.com/kb/927520/en-us

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  If you receive errors that your Windows 7 is not genuine, please turn it on.

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-in/Windows/activate-Windows#1TC=Windows-7

  Hope that the information provided is useful. If the problem persists, please answer and we will be happy to help you.

• Satellite L500 - how to install Windows 7 on new HARD drive

  I just bought 2 satellite L500 1xl/1xj second hand to re sell one and keep the other.

  It's both fired their HARD drive and I have no installation CD re install Windows 7.
  How can I do this without the CD or the original HARD drive?

  > I have no CD installer again to install windows 7, how can I do this without the CD or the original hard drive?

  Get Windows copy disk and installation, all the drivers are available on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also buy a [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] I see no other options to do so.