Problem with controller network after installing win 7

Similar Questions

• Does anyone know if HP or Microsoft has a fix for the problem with the microphone after installed win 7 own?

  I have a Pavilion 6700 AQuels came with Vista install that the HD has been replaced and installed Win7. Now the built-in microphones do not work on anything whatsoever.  Any help would be greatly appreciated.  Thank you.

  Paul

  Paul Merci much.  You know what I did?  Well, I went to Dev man and looked at the properties of its clicked on update driver card and found a driver Realtec and that fixes the problem.  Works fine now.  Yet once again I can't thank you enough your time a review on this issue.  Don't know if I'll have more questions, but I'll definitely stay here if I do.   ::) Paul

• did someone had problems with lightroom 5 after installing Mac OS El Capitan?

  did someone had problems with lightroom 5 after installing Mac OS El Capitan? the images are well n the library but darken when I switch to develop fashion

  It's a shame that you did not check for problems before you can update your Mac

  First, see if the update to the fixed bug Mac 10.11.1 will help you

  -an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008

  -In ADDITION the need to update the drivers nVidia (links included in the message)

  -There is also 'a' mention of an another 10.11.2 bug fix tested by Apple

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

  -There is also a link on the video display problems in Premiere Pro

  - and many other programs... MORE Microsoft Office also has problems

  More official Adobe help pages listing problems Mac 10.11

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-and-El-Capitan-Mac-OS-10-11.html

  http://blogs.Adobe.com/PremierePro/2015/10/Premiere-Pro-CC-and-Mac-OS-x-10-11-El-Capitan.h tml

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-and-El-Capitan---Mac-OS-10-11.html

  http://blogs.Adobe.com/audition/2015/10/audition-CC-and-OSX-10-11-El-Capitan.html#.VjjYBtG raUk

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Pavilian dv6 - 6 c 13nr: loss of controller network after installing Windows 7

  My hard drive has failed, and when I replaced it, I did a new install of Microsoft Windows 7 Professional.  Work of connection't wireless (he did) I know that I need to put the correct drivers back to, but I don't know what network contraoller I; any ideas or suggestions?

  Hello:

  According to the list of parts for your laptop, it comes with the Realtek 8188CE wireless network adapter.

  This would be the link to the driver you need for this model of the wlan card.

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.

  File name: sp57049.exe

• 3 problem of dongle network after install Vista service pack 1 and 2

  I just installed the Vista SP1 and SP2... before my dongle 3 network worked well.

  Now when I turn on my computer and I put the dongle in a usb port 3 program is show: "No network", before the program 3 showed: "scanner... and after"ready the Connect".. » (SORRY FOR MY ENGLISH!) Mark someone understand me :)

  Now, I need to uninstall the 3Connectez program and after reinstall... now its working. But every day I need uninstall, install... and if possibble I want not to install, uninstall every day.  What is the problem?

  My computer is a Compaq Presario c700 (32 bit OS)

  Hello

  I suggest you download theZTE MF627 dongle drivers on the system and check if the problem is resolved.

   

  If this is not the case, unfortunately the drivers for ZTE MF112 are unavailable and you may need to contact 3 dongles for additional help. Click on the link below.

  http://www.three.co.UK/Help_Support/contact_us/

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• problem with authui.dll after installing a windows 8 skin pack

  Hello

  I'll just run you through my problem, I installed a windows 8 skin pack which I initially thought was a product of windows (but it wasn't) after installation it forced me to restart my computer, it worked well but it didn't look right and my windows program of customization wouldn't work, so I used the uninstall program to uninstall files , but it was recommended not to remove the uninstall program so I didn't, after uninstalling it prompted me to restart my computer again once I did, when he got the login screen, a window popped up saying my authui.dll has been deleted or missing, and caused the logonui.exe to plant or does not work properly , so I turned off my computer in the only way that seemed possible that was to hold down the power button for 5 seconds, then I have it turned on and tried to get the menu of the OS and when it did my off usb keyboard so I couldn't choose Restore my pc, is there any other way to restore my pc? I have another laptop and a USB 4 GB if that could help. Also is it possible to re - install or recover windows uses a USB?
  OS: Windows Vista Ultimate 32 bit

  Hello

  Often, we see errors at startup as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• Global problems with IE crashing after installing the latest updates from Ms.

  After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our portal Citrix Presentation Server SSL/VPN.

  Hi Chad t,

  Data Execution Prevention (DEP) is a set of hardware and software technologies that perform additional checks on memory to help prevent malicious code from running on a system.

  The main advantage of the DEP must help prevent the execution of code from data pages. In general, code is not executed by the default heap and the stack. Hardware DEP detects code that is running from these locations and throws an exception when execution occurs. Software DEP can help prevent malicious code to take advantage of exception-handling mechanisms in Windows.

  Microsoft does not recommend to Turn off the Data Execution Prevention (DEP).

  For more information on DEP, you can access the link below for the blog that talks about the DEP and the DEP/NX problems.
  http://msdnrss.thecoderblogs.com/2009/10/10/understanding-depnx/

  As you mentioned it started after the updates, I also suggest you to uninstall Internet Explorer and put it back manually and see if the problem persists. Access the links below for the steps to uninstall and reinstall Internet Explorer 7 respectively.

  http://support.Microsoft.com/kb/927177

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9AE91EBE-3385-447C-8A30-081805B2F90B&displaylang=en

  For further assistance, you can also consult to Citrix Support to see if they have a fix or a workaround is available.
  http://www.Citrix.com/lang/English/support.asp

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a problem with Windows startup after installing an update.

  Original title: startup problems

  Hello

  As I did the August update, my laptop does not start in normal mode.
  When it starts, it gets to the windows logo, waiting if you like and then the screen flickers and after long hours, I get a 0 000000 x cannot read the message memory.
  I tried the Fix cumputer system recovery, deleated manually updates, nothing works.
  I tried to make a backup, to restart the computer, but you can't do it in safe mode.
  any tips?
  thnx

  of course, you know your stuff.

  It wrked all. It turns out that SXUPTP driver was the problem. updated and now everything works fine.
  Thank you

• Problem with screen resolution after installing Photoshop CC 2015

  I've recently updated my Photoshop by installing Photoshop CC 2015.  It works very well, but all aspects of the view appear oversized, including text, icons, tools, panels, etc.  Change the font size in the preferences has no impact.  It seems that the Photoshop screen resolution has been changed, but none of my other programs were affected.  Running Windows 7 Ultimate on a Hewlett-Packard PC.  Would appreciate any advice.

  Only, I have solved my problem.  I went to the Interface edition/preferences /.  Under scaling of the user interface, the default setting is Auto.  I chose 100%, Photoshop is restarted, and I was back to the view I'm used to that.

• Problem with driver WLan after installing XP on my Y510

  Hello

  The areas speaks for itself... I tried the drivers for XP from Intel and Lenovo Homepage home page and still no luck. Any suggestions or solutions?

  Yes.

  Don't ask - just install.

• Problems with opening pdf after installing Adobe Reader

  I am trying to download Adobe Reader. I already downloaded and installed. I completed all the steps. However, when I try to open a pdf file, it is said that I need to launch Adobe Reader and accept the end user license agreement, then leave, then re-launch the browser. When the installation is finished, he did not give me the opportunity to do so. How can I fix it?

  You do what he says. If you are on (prior to 8.0) Windows, go to start > all programs, find the drive and launch it. If on a Mac, go to Applications, find the drive and launch it.

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.