Problem with cursor and software problem (hard to explain)

Similar Questions

• Problem with cursor and Transactions

  Hi friends,
  
  I will carry out the sub set of orders where some records are removed as a transaction. If there is no problem with a set of transactions, this recordset is ignored and following Recordset is executed. With code below, if an error occurs in one of the statement, control passes to the exception block where it cancels the registration point and unwanted instructions are restored. So far so good. But the problem is execution stops here. I need to skip this record id and loop for remaining IDs. Help, please.
  
  
  create or replace PROCEDURE DeleteRecords
  AS
  SelectDate date: = SysDate () - 27;
  NRTSI varchar2 (100);
  CURSOR c_TrnInfoNull IS select id from trn_info where CREATED_TISTMP < SelectDate and trn_tistmp is set to null;
  BEGIN
  
  FOR myrows IN c_TrnInfoNull LOOP
  SAVEPOINT TrnSavePointNull;
  delete from TRN_ERROR_DETAIL where TRN_INFO_ID = myrows.id;
  Select code from NRTSI from TRN_PYMT_DETAIL where trn_info_id = myrows.id;
  delete from TRN_PYMT_ADDNL_DATA where TRN_PYMT_DETAIL_ID = NRTSI;
  delete from TRN_PYMT_DETAIL where ID = NRTSI;
  delete from trn_info where id = myrows.id;
  COMMIT;
  END LOOP;
  
  EXCEPTION, THEN, THEN go BACK to TrnSavePointNull.
  DBMS_OUTPUT. Put_line (dbms_utility. FORMAT_ERROR_BACKTRACE());
  END;

  create or replace PROCEDURE DeleteRecords
  AS
  SelectDate date:= SysDate()-27;
  TRNID varchar2(100);
  CURSOR c_TrnInfoNull IS select id from trn_info where CREATED_TISTMP
  

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966

• Problem with activation by using two hard drives (XP on one) and Win7 on the other

  I have XP sp3 installed on a hard drive and Win7 on another. I never use XP, I only keep there to keep my Win7 works great.

  I do not remember how did I installed win7, but I pretty sure I booted from a USB key and installed on a new hard drive.

  It seems that XP hard drive is in charge the boot settings, or something because I have set as the boot default HDD (in bios), and then select Windows 7 in boot menu that follows.

  If I select the hard disks Windows 7 the default boot hard drive, Windows restores activation. Select the hard drive with XP and win7 then choosing in the start menu, works very well, the activation is OK again.

  I'll install Win8 (that I already bought), but I still need to figure out what to do with this situation, because I need to replace the hard drive where XP is installed and install Win8 and have a double Win7 and boot 8.

  It is possible to solve the problem of activation, without having me call Microsoft? I use a utility called EasyBCD 2.2 and I was wondering if maybe this program could help fix me.

  Any thoughts?
  Wilfredo.

  Disconnect the drive xp, fix the win7 installation and activate if necessary

• Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Hello Bernard,.

  You sign a document that has authentication based on knowledge, applied in it? If so, and if you can't go to questions, then you will need to contact the sender of the document because they can remove it and return you the document. You can respond directly to the e-mail received esign and happens directly from the sender.

  Kind regards

  -Usman

• problem with the CURSOR and WITH clause

  Hi guys,.
  
  I have never created a package before. I try to run it, but I get:
  ORA-06550: line 8, column 16:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 8, column 3:
  PL/SQL: Statement ignored
  
  I know that my problem is in the next section
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  
  
  Is the above correct?
  
  When I copy paste the "heart" of the query, it works very well. I really have a problem with the CURSOR and the declaration.
  
  Here's the code in its entirety. I know that the code is much more then he returned, but ignore this overload that was to do some tests to make sure that I can achieve any query request.
  
  CREATE OR REPLACE
  PKG_SPF_NATIONALREPORTS PACKAGE BODY IS
  
  PROCEDURE GET_NATIONAL_TOTAL_RESULTS (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor IN OUT C_RESULTS)
  IS
  v_io_cursor C_RESULTS;
  
  BEGIN
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  SELECT
  -START P_SelectFields
  r.cli_served,
  r.EIER,
  -END P_SelectFields
  r.RC,
  r.Year_ID,
  r.period_id,
  r.agreement_type_ind,
  CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT,
  YEARS.year_desc,
  RC_CODE.rc_code_id,
  RC_CODE.rc_code,
  AHRDA HOLDERS. AHRDA_ID,
  AHRDA HOLDERS. REGION_ID,
  AHRDA HOLDERS. PROVINCE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_DESC_EN,
  ROW_NUMBER() over (partition R.YEAR_ID, R.CONTRACT_Number_Text
  order by
  P.PERIOD_desc
  (/ / DESC NULLS LAST) AS r_num
  RESULT r
  JOIN period p ON r.period_id = p.period_id
  JOIN CONTRACT_NUMBER ON r.contract_number_text = CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT
  JOIN RC_CODE ON contract_number.rc_code_id = rc_code.rc_code_id
  JOIN AHRDA holders ON ahrda.ahrda_id = rc_code.ahrda_id
  JOIN AGREEMENT_TYPE WE AHRDAS. AGREEMENT_TYPE_ID = AGREEMENT_TYPE. AGREEMENT_TYPE_id
  JOIN the YEARS WE r.year_id = YEARS.year_id
  )
  SELECT year_desc
  -START P_SUMFields
  SUM (cli_served) AS sum_cli_served
  The SUM (eier) AS sum_eier
  -END P_SUMFields
  OF got_r_num
  GROUP BY year_desc
  ORDER BY year_desc
  ;
  
  io_cursor: = v_io_cursor;
  
  END GET_NATIONAL_TOTAL_RESULTS;

  Agree - all this talk of loops FOR is completely irrelvant.
  A refcursor is usually the exact mechanism to return a result set.

  What is C_RESULTS?

  Just use SYS_REFCURSOR.

  No need for local variable.

  OUT why? Not just walk OUT?

  PROCEDURE GET_NATIONAL_TOTAL_RESULTS
  (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor OUT SYS_REFCURSOR)
  IS
  BEGIN
   OPEN io_cursor FOR ...
  END;
  

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• 3G BT Broadband Mobile (Huawei) problem with IE and Firefox, Satellite L300

  The L300 Satellite running Vista 32 bit.

  I have a connection Broadband BT and with WIFI or ethernet at home I can connect to the internet and go without problem.
  I also have the BT USB Dongle for mobile connection far from home, this is the problem.

  I can connect to the internet through the connection manager BT (the software that is included in the dongle and installed on the Satellite L300) and some dongles light and software see I am connected. Too, it is shown on the icons at the bottom of the computer screen.

  Problem is IE and firefox will open, but neither more, "cannot display this page' or 'Connection timed Out' my access provider Internet (BT) said this isn't a matter of Dongle it's a software issue.

  I know that it is typical of an ISP as much as the two BT lines did not know what to say,
  Funny it is... until last week it worked so I was away from home, I used IE then tried to do the full-screen page and then stopped with "cannot display this page". He has not worked since. I then installed Firefox to check that it was not just IE.

  I disabled my firewall and tried to connect, the same problems.
  My ISP said has the laptop computer connection selected an obscure port that IE of Firefox cannot find?

  If anyone can help?

  I'll go to MS and reinstall IE, I think now if the IE software "crushed" and changed some settings has firefox then tried to use the system corrupted settings?

  I have already downloaded again the BT Manager in BT connection

  Interesting problem.

  You are able to back up your data and run recovery?

  Or maybe just try a system restore to an earlier date.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Problems with QE65000 and optical driver Océna spectrometer

  Hi, a few months ago, I installed the driver to use the spectrometers of USB4000, HR4000 and QE65000 with LabVIEW 2010 with Windows 7 - x 64. Recently, I measured the spectrum of the Source of Calibration HG - 1 Mercury Argon with the help of software SpectraSuite and a LabVIEW program QE65000 spectrometer ("optical ocean 2000 4000 acquire continuous Waveform.vi, example of library, Fig1"). When I got the two spectra, I observed that there is a shift to the infrared region of the spectrum with LabVIEW program. Acquired calibration coefficients are consistent with "wavelength calibration data" that comes with the spectrometer (Fig2). So, I would like to know if there are problems with the example of the library program or what is the problem?. Attached to this message I send image of obtained spectra.

  The black figure is the spectrum obtained with the example LabVIEW program, including the ocean optical library. The red graph is the spectrum obtained with SpectraSuite and coinciding with the real spectrum of the HG-1 lamp.

  Best regards, Diego

  Version 1.3.2 should be alive in a few hours and this latest version is implementing the changes suggested above.  Did someone mind try these out and let us know how it goes?

  2000 4000 optical ocean pilot Page

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=7833BD4A31DA1274E04400144FB7D2...

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• I talked to someone at Microsoft who said they can take possession of my PC to fix its problems. Please tell me how. I had a contract with supportrix and was never satisfied.

  Tech online as supportrix

  I talked to someone at Microsoft who said they can take possession of my PC to fix its problems.  Please tell me how.  I had a contract with supportrix and was never satisfied.  My PC has needed help and di yes I.

  Hello

  Have you contacted Microsoft and they gave you the call?

  Microsoft or our partners make unsolicited phone calls (also known as the telephone canvassing) you charge for security patches or software.

  Click on the below mentioned link phishing appeals:

  http://www.Microsoft.com/security/online-privacy/phishing-symptoms.aspx

  Hope this information helps.

• Problems with word and PDF after computer crash. Error "user has access privileges."

  Problems with word and PDF after crash

  My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

  Hello world
  I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
  Thank you.