Problem with cursor high Pavilion dv8 bar (treble/bass control)

Similar Questions

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.

• Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Im having a problem with your security software.  Your data bass must be bad, now I can't have spent my address question.  Ive answered all questions to the best of my knowledge and software has always said that my answers are incorrect

  Hello Bernard,.

  You sign a document that has authentication based on knowledge, applied in it? If so, and if you can't go to questions, then you will need to contact the sender of the document because they can remove it and return you the document. You can respond directly to the e-mail received esign and happens directly from the sender.

  Kind regards

  -Usman

• Problem with internet high speed - Pavilion m8000n nForce

  I have a client with a computer of m8000n Pavilion under Vista Home Premium SP1.  It has LAN nForce chip.  When they returned to travel, the internet was moving incredibly slow (they have a wired 15 Mbps).  I checked the RAM, conducted an audit full disc, then checked the SMART status of the hard drive.  Everything from fine & was functioning normally.  This led me to believe that there may be a problem with the LAN driver.   There is no updated driver I can find for it.  I have an Internet search and found someone who has had a similar problem which was resolved by changing the flow control setting in the properties of the device.  I made this change & could make 4 restarts without the problem does not happen.  Someone knows something similar?  If Yes, have you solved the problem & how?  I want to be sure that the problem does not jump upward in the near future, so I will try to find answers.  Virus protection software they use is AVG 8.5.  They also have Spybot Search Destroy & with Malwarebytes Anti-malware (both of these programs must be run manually, even if Spybot's Tea Timer using).  I have run these same programs on many computers & don't have never experienced this problem.  They have multiple laptops in the House who don't know the slowdowns at all (they all wireless - the office is wired).  The router they have is a Netgear WNDR3300.  There is another office on the floor that is wired on the same router that doesn't have any internet speed problems (also your desktop HP - not sure of the model number, but it is a Pentium Dual Core, clocked at 2 GHz).  The ethernet wiring has been checked with a Fluke Microscaner 2 - it does not work properly.  The cable length is approximately 100 ' (the upstairs computer cable is longer).  It is a disconcerting problem.  If anyone has any ideas, your contribution will be greatly appreciated.  Thanks in advance.

  I appreciate all the entries, but I forgot this thread (it is 2 years old).  I was out of town when the problem resurfaced, while they had someone recharge the system & upgrade to Windows 7 - the problem has not been returned.  I wish, however, that HP had not removed non-destructive reinstall Windows Vista & Windows 7 machines.  It was a huge harm to their customers.

• Problem with cursor - will switch to a link

  I was hoping that someone could help with this.

  My dad's Mac has a problem with the cursor. It uses the trackpad and when you try to click on a link, it will not work. The arrow does not change into a symbol of the 'hand' and it can not click on it. This makes it almost impossible to navigate. It seems that the links are not recognized. He tried to use a mouse via the USB port and nothing changes.

  He tried to update to El Captain but he can't because the mouse doesn't work. The simple, restart or turn off / suite does not work. The problem persists on Chrome and Safari.

  Any help appreciated, thanks.

  Hi Irbea,

  Thank you for using communities of Apple Support. I see that you are the dad had problems with clicking on the links on his MacBook. These are some great troubleshooting steps to try to solve this problem. I am happy using.

  According to the steps that he has already done, I'll try to test this in safe mode. This will allow his MacBook making some changes and prevent the loading of the software. Please follow these steps to safe mode:

  Try safe mode if your Mac does not end commissioning

  While you are in safe mode, you may notice that the MacBook is running slower or the screen flashes.  No worries, it's normal.  Read this article for more information about this:

  Graphics performance limited in recovery of OS X or in safe mode

  If you continue to have problems trying to test in a new user:

  How to test a question in another account on your Mac.

  Have a great day!

• Problem with screen macbook pro black bar on the left

  I'm pretty new to owning a mac.  I went to pick him up today on my mac and the screen was just a bar unique black thumbs on the left side.  Then the rest of the screen changed between white and colors scrambled and now it's pink with mixed green bars.  It changes each time I try to reboot.  The strange part is that when I connect to my TV it works on my TV.  I don't know what to do.

  You have a hardware problem that can't be dealt with at an Apple store genius bar or a FSAA.  From your description, there is a problem with the display or display connection.  Make an appointment for a FREE evaluation.

  Ciao.

• Problems with drivers hp pavilion dv6-6c65sx new after that I installed windows 7 ultimate 64-bit

  I have hp pavilion dv6-6c65sx A7P80EA #A2N. I installed my windows 7 ultimate 64-bit myself and I still have two problems with the hardware drivers.

  1 - once, I downloaded and installed the new graphics driver file name Win64_152822.exe for support of the Intel, the Standard VGA Graphics Adapter the unknown value and it may need new driver. Take a look at the screenshot for more information.

  

  

  

  2. I can't use a fingerprint reader to log on windows. It says that I have not installed on application management. I tried to download some applications also tried to update the driver but nothing works for me.

  It's for more details

  Validity sensors (WBF) (PID = 0018)

  Port_ #0001.Hub_ #0003

  Hello:

  It is the only driver you must install for your model.

  He installed the AMD graphics cards and Intel.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

  In order to register your fingerprints, as well as the print real finger sensor driver, you must install the security software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

• Problems with my hp pavilion g6

  Hello, I got a big problem with my laptop.

  It is a Hp Pavilion 2146sl G6 and who needs an upgrade every time, she starts to do it, but it stops at 12%. So I can't upgrade my pc, even with the windows upgrade, automatically as well.

  Can you help me please?

  He was a windows7, but now is a Windows 8.

  Best regards.

  Roberto

  That's great! Please mark this message as accepted solution so that others facing the same issue may find this answer.

• Problem with the HP Pavilion e033tx-15 Notebook shutdown/restart/sleep

  I had windows 8 OS 64-bit working fine with my HP Pavilion Notebook 15-e033tx.

  I had problems, so I decided to update my drivers. I already had BIOS VersionF.08 and the hp support page has shown that there is an update of the bios to VersionF.21.

  After updating the bios the problem started when I stop lighting and the laptop into sleep mode kindof. I have to hold the switch down to foce him close. If I restart it, it says "reboot pc", goes blank and then all power off, and it's not stopped.  and if I SLEEP, he's not waking up.

  I rolled back the bios and it fixed the issue.

  Then I freshly installed win pro 8.1, and it has only VersionF.21 of the bios available.  Same problem again.

  HP Support Assistant showed that a new bios update Insyde F.22. But the problem is still there.

  I searched other posts with similar problem and I can't seem to solve this problem. Help, please.

  Henrico Hello and welcome on the HP Forum!

  I understand that you have a problem with the BIOS.  I'll try my best to help you solve this problem. I suggest following the procedure described in this document for the restoration of the BIOS .

  If this does not resolve this problem then restores the version F.08 http://support.hp.com/us-en/document/c02693833 driver it should always work for Windows 8.1.  Here is a document for more information of the device to Windows 8 Manager which explains how to roll back the driver. It will be the same steps for Windows 8.1.

  I suggest Using HP Support Assistant (Windows 8) to change your settings for manual update. This allows you to choose what you want updates.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• Problems with HP laptop Pavilion dv7-5004tx with the sound and video is this laptop being recalled?

  Hello I desperately need help.

  I have a laptop HP Pavilion dv7-5004tx, which is about a month.

  It's a really highy specced machine, 8 GB mem 1 GB card video etc.

  The problem is that when it video or audio playe he stutter along. I sent to hp about this problem and they do not come back to me? It is currently running windows 7 64 bit home edition.

  The model number does not exist when I search the site of HP?

  I noticed on some laptop computer review sites that it was be recalled, but it was the only information I could get. No specefics.

  I would really appreciate help from anyone out there? It seems as if HP tries to hidden it? There is no information about this laptop on any one of these sites (that I could find) and model number doesent exist on their site either.

  I think I have found a solution to my stuttering audio and video playback. I disabled the HP 3d drivegaurd software and so far it seems fine. After a search in any of the HP forums support I discovered a number of people have had similar problems with various portable computers HP.

  The solution seems to be to disable the car care software? HP aware of this and they do nothing to solve the problems with the drivegaurd software?

• Problem with the HP Pavilion G6 VGA Driver

  Hi dear customer service I bought a laptop model: HP Pavilion g6. I had some problems with my VGA driver after I installed windows 8 on it.

  I have downloaded my driver VGA of ATI in the link below

  http://support.AMD.com/us/gpudownload/Windows/pages/radeonmob_win7-64.aspx

  It is installed successfully, but does not work properly. For example in the windows screen resolution setting 8, that this device is not registered when it is listed in the device handles as indicated.

  In this regard, you please help me find a certified HP driver for my laptop.

  Best account.

  Go to http://www.amd.com/us/products/technologies/amd-catalyst/pages/catalyst.aspx and when clicked on

  'Download the latest AMD Catalyst Software'. You will be redirected to

  http://sites.amd.com/us/game/downloads/Pages/downloads.aspx. Click

  Detection and automatic installation

  AMD has downloaded a piece missing and restart of Catalyst Control both Switchable Graphics has worked.

• Problem with cursor and Transactions

  Hi friends,
  
  I will carry out the sub set of orders where some records are removed as a transaction. If there is no problem with a set of transactions, this recordset is ignored and following Recordset is executed. With code below, if an error occurs in one of the statement, control passes to the exception block where it cancels the registration point and unwanted instructions are restored. So far so good. But the problem is execution stops here. I need to skip this record id and loop for remaining IDs. Help, please.
  
  
  create or replace PROCEDURE DeleteRecords
  AS
  SelectDate date: = SysDate () - 27;
  NRTSI varchar2 (100);
  CURSOR c_TrnInfoNull IS select id from trn_info where CREATED_TISTMP < SelectDate and trn_tistmp is set to null;
  BEGIN
  
  FOR myrows IN c_TrnInfoNull LOOP
  SAVEPOINT TrnSavePointNull;
  delete from TRN_ERROR_DETAIL where TRN_INFO_ID = myrows.id;
  Select code from NRTSI from TRN_PYMT_DETAIL where trn_info_id = myrows.id;
  delete from TRN_PYMT_ADDNL_DATA where TRN_PYMT_DETAIL_ID = NRTSI;
  delete from TRN_PYMT_DETAIL where ID = NRTSI;
  delete from trn_info where id = myrows.id;
  COMMIT;
  END LOOP;
  
  EXCEPTION, THEN, THEN go BACK to TrnSavePointNull.
  DBMS_OUTPUT. Put_line (dbms_utility. FORMAT_ERROR_BACKTRACE());
  END;

  create or replace PROCEDURE DeleteRecords
  AS
  SelectDate date:= SysDate()-27;
  TRNID varchar2(100);
  CURSOR c_TrnInfoNull IS select id from trn_info where CREATED_TISTMP
  

• Problem with the HP Pavilion dv5-1015ea

  Someone had problems with the dv5-1015ea model?  I recently had an and it seems to make a humming/rattling noise (but this is not the fan) especially when your running a program or on the internet?  Any comments will be useful

  Maybe it's just the hard drive.

• Problem with keyboard HP Pavilion n004tx-15 Notebook PC

  Hello Sir, I have a problem with my keyboard, keys all work together. I can't even write if I press 'b' button in windows help and support opens. Is that I copy paste the b word.and same way to many keys work together as if I perss e key in this case he type 2 Word er & r er, with t he type the & open brightness, with g he opens 2nd screen. and as several other keys do the same thing. I typed this very diffculty. should I do now.should I lessee service center or change the window

  AshishDavid wrote:
  

  Hello Sir, I have a problem with my keyboard, keys all work together. I can't even write if I press 'b' button in windows help and support opens. Is that I copy paste the b word.and same way to many keys work together as if I perss e key in this case he type 2 Word er & r er, with t he type the & open brightness, with g he opens 2nd screen. and as several other keys do the same thing. I typed this very diffculty. should I do now.should I lessee service center or change the window

  Hello

  OS, 32-bit or 64-bit?

  Try a hard reset first.

  Try following these documents & help:

  Incorrect characters are displayed when you use keyboard

  Make sure you have the correct keyboard layout selected by following the steps in This Microsoft article.

  Partners:

  Computer keyboard laptop troubleshooting (Windows 7)

  OR

  Computer keyboard laptop troubleshooting (Windows 8)

  Problem of annoying keyboard typing wrong characters

  Thank you

• A problem with installing high-Speed2Go

  Cannot install this application.  stops an error message

  Contact the manufacturer/distributor in case of problem with it.

  See you soon. Mick Murphy - Microsoft partner