Problem with database adapter serivce

Similar Questions

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• Problems with Isatap adapter and Wirelesss network.

  The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Microsoft-ISATAP-adapter-4-not-working/ef9c6ad9-623e-416F-8D9F-8e3d83d998ca?page=2#LastReply

  Please start your own Thread in these Forums.

  You are replying to a Thread 2009; It comes to 2014.

  ________________________________________

  Read this, you can:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520/en-us

  Windows cannot load driver (Code 31), etc.

  RESOLUTION

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ____________________________________________

  You do not tell us the error your when you try to connect to the wireless network.

  We don't know if it's drivers or you have put in place correctly.

  Use the computer that you use to get here for access to the Sony site > downloads Section > key in your model number and operating system > find NETWORK card drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > finding drivers > download and save their > copy to a flash drive and transfer and install them.

  See you soon.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Problem with the adapter on Xbox 360 to PC wireless controller

  Hello, I'm having a problem with my adapter on Xbox 360 to my PC wireless controller. When I try to connect the two lights will stop flashing as if they connected and no indication on the controller is showing that they are. Also the utility on the PC does not show that there is a connected device. I tried searching through my device manager and all solutions involving which does not work / I couldn't find how it works. If someone can quickly answer that would be great. -Brandon

  Hello

  I imagine the inconvenience that you are experiencing.

  I suggest you to contact Xbox support for assistance on this issue.

  Xbox support

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  For any query related to Windows, feel free to post. We will be happy to help you.

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Insert tables from database Master_detail_detail web form with database adapter

  Hi all

  I have a web form of my payload that contains the business as master_detail_detail objects

  data association I map object [] as input to the collection service and be used to iterate it using "copy list", it works fine when I master_detail relationship and save on db correctly but when I card retail and events in a way even with the error:

  LIAISON. JCA-12563

  Exception occurred when the link was invoked.

  Exception occurred during invocation of the JCA binding: "JCA binding run reference operations"insert"has no reason of: no mapping not found Exception.»

  The descriptor [class dbReference.Mosavabe] [eghdamMosavab] mapping is not found. The input xml record was an element [Soratjalse/Mosavabe/eghdamMosavab].

  Most likely the wrong xml input variable (does not not to the xsd expected) was adopted at this invoke.

  Make sure that the input xml file is valid compared to the xsd and the mapping exists in the Mappings.xml. If an older version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the application server. If the same descriptor is described in two separate Mappings.xml files, make sure that both versions include this attribute and mapping.

  ".

  The called JCA adapter threw an exception of resource.

  Please review the error message above carefully to determine a resolution.

  relationships are 1 to many so I want to have the number of records in detail

  

  I found the problem...

  When we want to use complex associations that contains a lot of detail table, must use the XSL transform that placed in the top right corner in the implementation of data binding.

  This feature uses a for card auto xsl Editor.

  more explanations in the development chapter 5 book

  https://docs.Oracle.com/middleware/1213/BPM/docs.htm

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• I have a problem with the adapter plugged in, but do not load with pavilion dv6 3050 tx

  I bought a new pc hp laptop pavilion dv6 3050 tx a few days before, 1 day I m facing a problem on the charge. I put my laptop on the pricing but maximum time show connected does not support. kindly help me. Is - this prolem with battery or ac adapter or software problem. Please suggest me a solution.

  Hello

  The adapter block should be able to cope with weak variations in the power supply, so I doubt, however, there is a problem with your electrical network - only an electrician would be able to confirm it for you by testing the circuits of power supply to your property.

  Regarding overheating, there is a circuit in your notebook that interrupts the battery when it detects that it is at full capacity, so this shouldn't be a problem.

  Kind regards

  DP - K

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Access WiFi Limited, problem with Wifi adapter

  Original title: wifi access

  my laptop recently having limited wifi access issue. I tried troubleshooting, but it did not help. It comes up with a window saying there is a problem with my wireless card. I checked the wifi card in the Device Manager and it says that the equipment did not work properly. then I tried uninstalled and reinstalled, but the problem is not fixed. my card is atheros ar9485 qualcomm (im using os win 8). I searched online and some people having problems of this ar9485 as well. then I updated the NIF of the driver file, but the problem still exists. im going to be crazy now. could you please help me out of it? much appreciated!

  Hello

  What is the brand and model of the laptop?

  There could be a problem with the driver for the wireless network connection card.

  Kindly, follow these steps and check if that helps.
  Method 1:

  If you get an error 'problem with my wifi adapter', please uninstall and reinstall the wireless card driver. Check with your computer manufacturer or the manufacturer of your wireless (Atheros) adapter and make sure you have the latest driver available for the card.

  Follow these steps:
  First, download the latest driver for network card wireless from the manufacturer's Web site.
  a. to uninstall the card, then press X and Windows on the screen. Click on Device Manager.

  b. locate network card and expand the driver icon.

  c. right-click on the icon of the Atheros wireless driver and click Uninstall.

  Follow the instructions on the screen to uninstall the driver.

  d. open the folder that contains the installation file of the latest driver that you downloaded.

  e. double-click the Setup file and follow the instructions on the screen to install the NIC driver

  You can try some troubleshooting section:
  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Method 2:
  You can also reset TCP/IP manually.

  Follow these steps:

  a. press the Windows key (enter the splash screen), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the laptop.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Problems with SAP adapter

  Hi all
  
  We try to call some SAP BAPI of BPEL and hit the below errors
  
  Mistake1:
  ----------
  For 1st call BAPI of BPEL console fails with:
  
  The adapter framework has been impossible to establish an outgoing connection of JCA due to the following problem: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Configuration "SAPHR" not available for the "SAP".
  ; nested exception is:
  ORABPEL-12511
  
  Checked the directory AS_HOME\adapters\application\config\XXXXX\log to the JCA connects and the error is as below:
  
  Thread [AJPRequestHandler-HTTPThreadGroup-55, 5, HTTPThreadGroup] [error] [IWAF JCA] error in the creation of IWAFManagedConnection:
  java.lang.IllegalArgumentException: Configuration "SAPHR" not available for the "SAP".
  at com.iwaysoftware.af.container.AdapterManager.checkConfig(AdapterManager.java:450)
  at com.iwaysoftware.af.container.AdapterManager.getActivatedAdapter(AdapterManager.java:238)
  at com.iwaysoftware.af.container.IWAFContainer.getActivatedAdapter(IWAFContainer.java:491)
  ...
  ...
  
  Error2:
  ---------
  For another BAPI of BPEL console call fails with:
  
  Thread [AJPRequestHandler-HTTPThreadGroup-55, 5, HTTPThreadGroup] [error] [Decloitre JCA MySAP] * error in the analysis of the input document.
  Oracle.Xml.Parser.v2.XMLParseException: start of the element root waited.
  at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
  at com.iwaysoftware.idom.XmlDocument.parse(XmlDocument.java:120)
  at com.iwaysoftware.idom.XmlDocument.setRootXML(XmlDocument.java:77)
  at com.ibi.afjca.cci.IWAFInteraction.execProcess(IWAFInteraction.java:195)
  ..
  ..
  
  However, we are able to obtain satisfactory response from the JCA Test servlet with the same request payload. All entries on what may be causing the errors above invocation of BPEL console.
  
  Thank you
  Laros

  Yes, who can help. Or you can change the wsdl file which fail to refer to the correct configuration (we don't have to reconfigure the configuration "SAPHR")

  Thank you
  Maury

• Problem with database querying adapter

  Hi all
  
  The polling option treats all rows from a table at a time rather than use the polling frequency. I used an option to update a field (logical deletion) where I've initialized unread value = ' n "and read the value = 'Y'." Now, the problem is that I have to query a single row in the table for every 60 seconds (the second row should be transformed only after 60 seconds), but all the lines are treated at the same time. Can someone let me know what could be the problem?
  
  I put in the db adapter options:
  Polling frequency: 60 seconds
  Lines by Document XML and database: 1
  Lines per transaction database: 1
  JDBC, query & Timeout options: 60
  
  Thank you

  Please see the below URL, this can help you.

  http://www.albinsblog.com/2012/10/DB-adapter-message-throttling-in-Oracle.html#.UQI3_fLDiuk

  Concerning
  Albin I
  [http://www.albinsblog.com/]

• Error with database adapter

  Hi all

  I use a data adapter to write values to the database. The build succeeded. However, when I test it in the console with the entry sameple I get the below error.

  ERROR:

  java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: customer from SOAP server error: Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run reference"insert"operations have to: connection problem component binding JCA.". JCA Binding component is unable to create an outgoing connection of JCA (CCI). NGW_PP_DBAdapter:Write_DB_Adapter [Write_DB_Adapter_ptt::insert (StgProductportfolioCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. Error of JCA - 12510 JCA adapter localization resources. Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / > liaison component JCA is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/DB_Conn. The reason is most likely that 1) the resource adapter RAR file has not been deployed successfully to the application server WebLogic or 2) the element '< jndi name >' in weblogic - ra.xml was not defined in eis/DB/DB_Conn. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). Please fix this and then relaunch the Application Server, please make sure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections. ". The called JCA adapter threw an exception of resource.

  
  

  Can someone help me fix this error.

  
  

  Thanks in advance.

  
  

  Error, it is clear that your composite is not able to find the jndi of DB. The Binding of JCA component is unable to startup the adapter resources specified in the item: location = ' EI/DB/DB_Conn.

  Please follow these steps:

  (1) have created DB DB/ist/DB_Conn jndi you use on weblogic console.

  (2) after you have created you redeploy the DB adapter to weblogic console.

  (3) If you did above 2 steps cross check your jndi exists in your DB adapter or not on weblogic console.

  Who could be the possible causes of the error you are getting.

  I hope this helps.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog