Problem with Directx 9.0 graphics cards

Similar Questions

• problem with the asus HD5570 graphics card

  computer just freezes and becomes unusable despite install and uninstall the latest software and drivers asus and amd.

  The motherboard is an asus P5RD2-TVM/S

  667ram (2X2GIG)

  Graphics card is an asus EAH5570 GPU. 1gig ddr3 Directx 11 and opengl 3.2 support

  I bought this card a couple of years ago and only just opened the box that allows the disk installation and all sorts. Not extremely loud fans all the time will not upwards or downwards, then it crashes right especially when on the internet, no matter what browser. I am really confused and don't have a clue what the problem might be apart from being incompatible with the motherboard.

  Any input is greatly appreciated.

  Thanks in advance

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. the computer froze before installing the graphics card?
  2. have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Optimize Windows performance
  http://Windows.Microsoft.com/en-in/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please also check the compatibility of the graphics card with Windows 7 in the Windows Compatibility Center
  Refer to this article:
  Windows Compatibility Center
  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

  See also:
  8.1 Windows, Windows 8 or Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP Pavilion g series: problem with correction of the graphics card Administration says computer not connected, but it is

  PC questions message says: problem with SMA-Display adapt ATI Rodeon graphics cards.

  Click fix, it can not download the probable cause of the fix is pc is not connected to the internet, but I am.

  How can I fix this I don't know what to download

  HI @sami_3,

  Thank you for your inquiry.

  I understand that you receive a message saying: "there was a problem with the AMD-Display Adapter-ATI Radeon Graphics Cards. When you click on repair that you get a message that you are not connected to the Internet, but you are.

  I'd be happy to look for updates, but would need you know your exact model of the G Series notebook.  How can I find my model number or product number?

  You could try the HP Support Assistant to help acquire the right drivers running.  You could also test the graphic cards by running a hardware test on them. HP Notebook PC - hardware failures (Windows 7, Vista) screening. You will find the option for video under components.

  Please send the results of the troubleshooting.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ""Thumbs up " below!   If you need more assistance let me know and I will gladly do everything I can to help.

• A message box you informed that there is a problem with DirectX and cannot start Command Conquer 3 &.

  Original title: problem with starting game.

  I'm trying to play Command Conquer 3 & on my computer but cannot start the game, whenever a message appears saying that there is a problem with DirectX.
  The game needs min. DirectX 9 c I have so I do not understand the problem. I have Nvidia Gforce2 mx installed Gr.card so it should play without...?

  The game is C & C 3: Tiberium Wars

  Help, please!

  Hi ChrisNiven,

  1 Windows operating system you are using?

  2 have you tried to update the Nvidia drivers?

  Method 1:

  Check if there are problems with the DirectX installed on the system. Use DXdiag to troubleshoot all direct X related issues. DxDiag ("DirectX Diagnostics") is a diagnostic tool to test the features of DirectX and the problems of video material - or sound-related.

  For more information, you can consult the following article:

  Diagnosing basic problems with DirectX

  Method 2:

  You can also consult the following thread link and try the steps to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/command-and-conquer-on-a-Mac-with-Parallels-6-and/c737a45b-7c91-458A-AAC9-66bff80236d1

  You can see the following link support Nvidia to download the latest version of the drivers.

  NVIDIA driver downloads

  Hope this information is useful.

• Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

  MacBook details below?

  Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: Memory card reader internal

  USB device: USB OPTICAL MOUSE

  USB device: HUAWEI Mobile

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Apple keyboard / Trackpad

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Thank you

  gis_abc

  

  He seems to show NVIDIA graphics card.

  Kim

• Latency problem Satellite U500 - 1DZ CPD with the geforce 310M graphics card

  Hello

  I have a problem with a DPC latency caused by the driver of NVIDIA card.
  I use my computer for audio and it is really not possible to work.
  chart with geforce abled:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795529.PNG

  When I turn off the graphics card:
  http://nsm04.casimages.com/IMG/2010/09/22/100922123519210586795528.PNG

  Please give me an answer.

  My computer is a Toshiba satellite U500-1DZ, intel i5
  Thank you

  Hello

  How about driver sound, display driver and BIOS update.
  Have you tried that?

  To be honest, I don't know if this could help you or not, but if an update is available, then you should do this

  You said, audio performance is best when the GPU is disabled
  It chip NVidia s then maybe you should take a look in the nVida forum in order to get more details

• Are on the Satellite DirectX 9 compatible graphics cards?

  I think with the purchase of a satellite, but would like to know if it is graphics cards with which they come are directX 9 compatible I have mounted him and the program I video requires that.

  As far as I know each laptop with Windows XP Home edition is preinstalled with DirectX9. Video editing is generally not a problem, and you can do with each unit. In my opinion important is how the unit is powerful because of the procedure of decoding complex if you want to create own DVD.

  I did it with Qosmio G20 without any problem.

  Good bye

• Game Sims 2 problems with Directx

  I loaded XP prof on Tecra 8000 laptop. Sims 2 loads perfectly, but trying to play I get the message that I need new drivers for 3d as Directx 9.0 c does not.
  I can't find the drivers.

  This work on the laptop?

  Hello

  Did you check the Toshiba download page?
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  If you will not find the driver for this device you can try to search in other series of laptops that have the same graphics card.
  In addition, you can visit the graphics manufacturer for this driver. But be careful: some Toshiba drivers can damage the graphics card. You can use it at your own risk.

  As far as I know, the Toshiba graphics card drivers have a function of protection due to overheating problems.
  In this case, you can always find the most recent graphics driver updates.

  Good bye

• freezes on Hp IPISB-CH2 with the new installed graphics card BIOS

  I have the HP Pavilion Elite HPE H8 1010cs. Motherboard is HP IPISB-CH2. I bought the new graphics card GAINWARD Nvidia GeForce GTX 970 4 GB with 600W power supply Corsair CX600M. First of all, I tried my new power supply with my old nvidia 550Ti GPU. It worked perfectly. But when I replaced the old card with new GTX 970, bios freezes on the first power on the window. Escape does not work. I'll be back new graphics card, or is there still some hope in this?

  

  Hello @Tomas83,

  I understand that you are having problems getting your work HP Pavilion HPE h8-1010cs desktop PC with your Gainward GeForce® GTX 970 Phantom 4 GB graphics card. I think that the reason why you're facing this problem is the breaking backward compatibility on the PCIe slots was broken to the around the label Gen 2.1 and you try to put a Gen 3.0 card in a slot of Gen 1.0. In substance, it makes your computer incompatible with the graphics card, that you have chosen to use.  I provide you with an article on the overclock.net site called the final answer to the controversial compatibility of PCIe x 16 version., where the author explains what I've described and going in how he made the decision. I would advise that you read the article, if you have any questions about the issue you address.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Help, audio stop working in XW6600 with nVidia NVS 315 graphics card

  Greetings:

  I just buy a renovated, XW6600 Xeon dual processor, 8 GB of RAM, Windows 7 Professional 64 bit system.  The PC comes with a nVidia NVS 290 graphics card.  Everything works fine and the speaker in the motherboard Jack produces sounds.  However, when I change the NVS 290 with a NVS 315 (it is a HP spare part), the sound stops working.  The speaker in the systray icon has a red circle with an "x" in it.  If I right click on the speaker, the playback device, it shows two TV as icon one above the other with a red arrow pointing down and a description on the righ side saying "Digital Audio (HDMI) high definition Audio Device not connected.   I have the same result in 64-bit Windows 8.1.  The problem is solved if I reinstall the NVS 290.  For both cards, I use the latest driver from nVidia.  Am I missing something?

  Any help to solve this problem is greatly appreciated.

  Hello:

  When you install new video card, it must have a HDMI on it audio chip and what happens, is that the BIOS has disabled the integrated audio system thinking not only have you installed a video card, but you have installed a map audio too.

  Then, go into the BIOS, probably in the Advanced menu, the options menu, you will find onboard audio setting.

  It will be set to Disabled. Set to active, save the setting it by hitting the F10 key and again when you go out (save the settings and exit).

  When you restart, the integrated audio system should be back.

• Is DirectX 10 or 11 DirectX 9-compatible graphics card?

  Recently, I've been using Windows XP Professional SP3, and I realized that my on-board graphics card is old. So I decided to buy a new one and replace it.

  The problem is Windows XP only takes to support DirectX 9 .0c and I do not see much cards support this version of DirectX. All I see is DirectX 10 and 11 supported graphics card. And my question is: is DirectX 11 or card 10 graphics support DirectX 9?

  I'd really appreciate for all the answers. Help, please!

  You will need to request support or pre-sales service of the manufacturer of the graphics card in question, or at least show the number of brand and model of the card and see if a reader here wants to do a search for you.  I don't know why but before the sales are generally good to answer questions quickly when there is a potential sale pending...

  John

• Error code 43 (Windows has stopped this device because it has reported problems) on nividia 8800 gt graphics card

  I have a computer with dual nvidia geforce 8800 gt graphics card graphics cards, but I recently started getting the following in my device manager error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  I started getting this message out of the blue after moving from my computer to another room.  I knowingly did not change anything on my PC and have been released for about 2.5 years with no real problems to speak of her.  I tried to uninstall and reinstall the latest driver from nvidia and had no luck.  I don't have access to the nvidia due to the device being disabled control panel.  Also I tried to restore my PC to a previous save point with no luck as well.  A short reading on nvidia forums led me to try a registry scan and repair, but alas it was without result.

  Any advice on what could be the cause of the problem and the best solution would be greatly appreciated.

  Hi rd,.

  You could try to remove one of the cards, then update the driver.

  They should use the same driver and may be coflicting at startup.

  You should also check the power supply if it is a few years old.

  Also make sure it is off enough electricity for the installation of the split card.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with DirectX, you cannot start any game.

  Hello, I just joined here because I can't find an answer anywhere, I hope you can help me :)

  As the title says, I have problems to run games on my lap top, I can't run any game I have installed on it, they all show an error or do not launch at all. First of all for all, my computer specs:
  HP Pavilion dv7, running Windows 7 edition full 64-bit
  Intel Core i7 Q720 @1. 60 Ghz
  6 GB of RAM
  GeForce GT 320M with Directx 11
  And the games I've tried so far:
  -Roller coaster tycoon 3 Platinum (it shows Directx 9 not found)
  -Euro Truck Simulator 1 (in the settings window, I can't change between OpenGL and Directx, and it will not open with OpenGl I don't know why)
  -Euro Truck Simulator 2 (it crashes just before the splash screen)
  -Grand Theft Auto San Andreas (similar to the 2 Euro truck Simulator)
  -Age of Mythology - The Titans Expansion ('Failed to initialize')
  And I must say that all of these games has a great like 5 months ago (Yes, I have 5 months without playing an any of them).
  I will zoom checked drivers video card, update to the latest directx and I tried to downgrade my directx to version 10, but it seems to be impossible.
  It also shows, on DX diag on the section "Screen", DirectDraw, Direct3D and AGP Texture as 'unavailable '.
  Any ideas on how I can solve it? Thanks in advance, if you need info. just tell me :)

  Thank you for your quick response, I solved it today morning, I had to downgrade somehow the video card drivers and thn update again, and it worked, if anyone has the same problem, try to do this and hope it works for you also.

  Thanks, Imran M.

• What can I do I have problem with my debit in Greece card

  I can't insert my debit card on the invalid to say apple id or else account card. is the problem with the Bank of my country? or something else?

  Hello

  Follow the steps here to add a supported payment method:

  • Change or remove your information from payment of Apple ID - Apple Support
  • Payment methods, you can use in the iTunes Store, App Store and iBooks Store - Apple Support

• AMD A8 - 4500M APU with Radeon HD-overheating graphics card?

  Hello, I have a laptop HP ProBook 455 G1

  AMD Quad - Core A8 elite - 4500 M 1.90 GHz

  AMD Radeon HD 7640 G + Dual 8750 M HD graphics card

  Why are we in this program shows that the CPU temperature is high? And if it's possible.

  The computer does not reboot, works normally.

  http://prntscr.com/2f7858

  http://prntscr.com/2f7909

  http://prntscr.com/2f78gl

  And here's the temperature does nothing on their computers

  http://prntscr.com/2f78km

  Even if this program detects not only the high temperatures

  http://prntscr.com/2f7a9w

  I am from Serbia, and because the computer is under warranty, I sent it to an authorized HP service.

  http://h41191.www4.HP.com/SERVISI/

  I sent in

  NET Computer Engineering
  Novi Sad, elbow Ribnikar 52
  Tel: + 381 (21) 421 111

  They return my computer back and said everything was fine.

  I have to worry to the subject and with what program can accurately read the temperature?

  Hi Maxi69:

  Welcome to the forum!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .
  
  
  
  I hope this helps.