Problem with disk utility...

After upgrading to Mac OS Sierra custom poster disk utility looks like more detailed information about what is on my Macintosh HD, only a blue strip for the used area of the disc and the white for the empty area. Any suggestions?

Try to fix permissions of drive with disk - Apple Support utility

Ant then reset the management system (SCM) controller on your Mac - Apple Support

Tags: Mac OS & System Software

Similar Questions

  • Major problem of disk utility, think I have bricked my MB :(

    MacBook Pro 2014

    Please help with this, I don't know how I managed to spoil it. What can I do to fix? Did a clean install and tried to erase the disc. Yes I know I'm a total fool... to try to create a new empty but still fails with etc - 61. I'm out of my depth here. IM myself kicking. At the moment I have installed OS x on an external HARD drive which I use to this post. IM so afraid, I broke my computer, my mother will kill me!

    I have a 16 GB USB key where it remains the way to using that? I'm out of my depth here.

    Hello MSC7XWDC,

    Thank you for using communities of Apple Support.

    If I understand your message correctly you are trying to do a wipe and installing Mac OS X on your computer, but you're stuck on the part when you create a partition for it.  Because the partition has been erased, you will have to create this boot partition following the instructions below.  Once this is done, you can go through the installation process.

    Partition a boot disk

    If you want to partition a disk that you will use to start up your Mac, follow these steps.

    Partitioning a disk erases all files on the disc. Don't forget to copy the files you want to keep to another disk before the partition.

    You can specify the number of partitions and the size of each of them. If you want to use your Mac OS X startup disk partition, don't forget, it is large enough to install the Mac OS X software and applications, and the files that you will use.

    1. If you are partitioning an external drive, make sure that it is connected to your computer and proceed to step 5.

      If you are partitioning of the disk that you used to start your Mac, print this page so that you can refer to it later. To print this page, select print from the Action pop-up menu (looks like a gear).

    2. Choose the Apple menu > restart. Press the command (⌘) keys and R as your computer restarts.

      When you see a white screen with an Apple logo in the Middle, you can release the keys.

    3. In the Mac OS X Utilities window, select disk utility and then click on continue.
    4. Select the disk you want to partition, click Partition.
    5. Choose the number of partitions in the pop-up menu Configuration of Volume.
    6. Click on each partition and type a name for this, choose a format and type a size. You can also drag the separator between the partitions to change their sizes. If the name of the partition has an asterisk next to it, it is shown larger than actual size in order to display his name clearly.
    7. If you want to use a partition as a Mac OS X startup disk, click Options, and then choose it the GUID partition scheme.
    8. Click on apply.

    After you partition a disk, an icon for each partition of disk appears in disk utility and in the sidebar of Finder Windows.

    12.x disk utility: partition a drive

    See you soon.

  • Satellite A500-1HK: some problems with ECO Utility, touchpad, GPU

    Hi all!

    I am facing some problems with my laptop A500-1HK AND I would like to have your opinion!

    last month, the eco Utility application cannot be activated from the special keyboard of the botton at the bottom of the keyboard, although Ihear special sound because its touch botton (so it works fine). I can activate only in the start menu and then the botton in the keyboard touch would become green.

    At the top of the touchpad (mouse), there is a botton that enable / disable the touchpad. It works again.

    A few times when I'm working, the screen turns black and then after 5-7 seconds, that it becomes normal with a message that nvidia GeForce GT 330Μ had stop working but now works well! (is it something serious?)

    On the taskbar, there is an icon with a yellow exclamation point indicating the function that intel RST does not work. What is c?

    Keep in mind I have install all the drivers to the latest version, but nothing has changed! I have windows 7 64 bit GR

    Thanks in advance!

    > last month, the eco Utility application cannot be activated from the special keyboard of the botton at the bottom of the keyboard, although Ihear special sound because its touch botton (so it works fine). I can activate only in the start menu and then the botton in the keyboard touch would become green.

    Go to-> programs and features Control Panel
    Here are looking for ECO Utility and uninstall this software and restart the laptop

    Then visit the Toshiba UE driver page and look for the ECO utility.
    Download the software and reinstall it.

    > A few times when I'm working, the screen turns black and then after 5-7 seconds, it becomes normal with a message that nvidia GeForce GT 330? a work stoppage, but now works fine! (is it something serious?)

    The same as the ECO utility. Uninstall the screen / graphic card driver
    Download the latest driver from the Toshiba page and install it

    > To the task bar, there is an icon with a yellow exclamation point indicating the function that intel RST does not work. What is c?

    TSRI means Intel Rapid Storage Manager. It contains the SATA driver for SATA HDD controller.
    In case this does not work, reinstall it again.

  • Problems with disk Satellite pro 4200 hard assembly

    I have problems with a Satellite pro 4200.
    The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

    CU
    Eltgen

    Hi Eltgen

    Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

    It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

  • Burn a DVD with "disk utility".

    Before El Capitan (10.11.2), I was able to burn a DVD using "disk utility".  Here are the instructions that I used.  Disk utility has now a new version Version 15.0 (1511.3) and the statement no longer work.  Can anyone update these instructions?

    Copy DVD

    Follow these instructions to make a copy of your DVD unprotected:

    Insert your DVD into your Mac. Most Macs will automatically launch the DVD player. Once he starts, he gave up. You should see your DVD drive mounted on your desktop.

    Open disk utility (Applications > utilities). Select the DVD drive in the list on the left. You will notice that there are two DVD icons - select the one slightly indented (this is the DVD itself, while the first is the drive).

    Click on "New Image" in the main window of disk utility.

    Choose a name and a destination in the window "Save as...". ». Don't forget that your destination should have enough space to copy the whole DVD, which can be more than four concerts.

    In the window "Save as...". ', to ensure that the selection 'Format of Image' is set to ' CD/DVD Master' and the selection of "Encryption" is set to 'none '. Click Save.

    After you have copied the DVD in your destination drive, return to disk utility. Your new disk Image will appear in the list on the left side of the disk utility window. The original disc of DVD on your Mac.

    Insert a DVD disc that is accessible by writing in your Mac. Select your disk Image created in the list on the left side of the disk utility window. Click on "Burn" in the main window of disk utility. Choose your burn speed and if you want to check the data burned.

    You will receive confirmation once you the DVD are engraved with success and you are all set with a new copy of your DVD drive. Just save your new disk Image and you can make a copy whenever you may need.

    That is right. Apple has removed this feature FROM.

    You can do it from the Finder

    http://osxdaily.com/2015/11/22/burn-disc-images-OS-x-Finder/

  • Problem with disk space C or WinDir

    Hello

    I have problem with space Partition C:\

    Because the driver does not match the photo below?

    And now the disk space is full of unreasonable.

    Please help me!

    Hello

    I don't see what your problem is, as you're singling out a piece of data, the program (x 86) files on which is placed on your hard drive.

    Where do you think that Windows 7, etc is installed?

    It is installed on the C: drive and also takes place on it.

    ___________________________________________________________________

    This free program allows you to see what is taking place.

    http://www.Jam-software.com/treesize_free/

    Also check how much space system restore uses:

    http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

    _____________________________________

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    _____________________________________

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

    See you soon.

  • Problem with disk management.

    To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot affected 746,52 GB.

    I could not wish 'C' in the unallocated space.  Is this possible and if so, what is the procedure?

    Thanks for the help

    There is a specific problem with windows that imposes a limit of 2 GB on hard drives. This can be overcome by using a GPT partition table, but then needs a UEFI BIOS in order to boot from it.

  • Zoo Tycoon 2 ultimate collection-problems with disk 2.

    Hey my laptop is Asus brand and I have windows 8. I have zoo tycoon-ultimate collection, and it worked fine on my last laptop. Disc two usually run on my computer and it comes up with error 1305 error reading the file. I looked in other forums to help, but none of them seems to fix the problem I have. Can someone help me please?

    Hello

    Welcome to the Microsoft community. I appreciate your efforts toward resolving the issue. I would like to ask you some questions for a better understanding of the issue.

    1. Are able to install the game on another computer using the same disk?

    Try and copy the contents of the disc in your computer and then try to install it. If you are not able to copy the file, it could be a problem with the drive itself.

    Alternatively, you can try to install compatibility mode. After you copy the configuration from the disk file, try the following steps.

    a. right click on the driver file and select Properties

    b. Select the Compatibility tab

    c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list.

    d. let the driver to install, and then check the functionality.

    If you need additional help, let us know and we would be happy to help you.

  • Picture of problematic Bluray disc burned with disk utility

    Hi all:

    I export out of first two sequences: one is a 11 minute video that I exported a Bluray 1080 pm 23.976 h.264. The other is a sequence of 2 hours that I exported with h.264 Bluray 720 p 23.976. I has .m4v and WAV in again and made a basic menu, related all this and built a Bluray disk image. It was released as a 9 GB .iso. I then brought in disk utility which I burned on a Bluray disc on my mac pro book using an external Bluray drive via the USB port. I used the front disc to burn a blu ray and it worked fine. But this time when I go to play the disc after burning (using the same USB) DVD (mac OS app) says "disc not available".

    I tried several times with different long projects and I get the same questions.

    Any thoughts?

    Johnny

    My 'mac os support for playback of bluray' google suggests that the standard player mac does not support playback of bluray. I'd love to learn otherwise.

  • Formatting disk with disk utility.

    I can't have the "Score" button to activate (see photo). I need to reformat a drive in GUID. THE don't let me. Please help me. Thank you.

    Just use Erase. It will set the table to partition and wipe the drive. If you then need to divide the disk, you can use the partition tab.

    Disk utility partitions no long MBR disks. I think diskutil in the Terminal will always do, however.

  • Problems with exp util

    Hello, I want to export the diagram with all the tables and lines in this diagram, but I have a problem with the export of lines, I tried a lot of methods and are all does not work

    exp system / * QUEUE = exp_u.dmp LOG = exp_u.log OWNER = owner_name STATISTICS = NONE

    and here is the log message:

    Export: Release 10.2.0.4.0 - Production on sea Feb 12 14:54:17 2014

    Copyright (c) 1982, 2007, Oracle.  All rights reserved.

    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit

    With the partitioning, Data Mining and Real Application Testing options

    Export in US7ASCII and AL16UTF16 NCHAR character set

    Server uses the AL32UTF8 (possible character set conversion) character set

    About to export specified users...

    . export of the actions and the patterns of objects procedures

    . exporting foreign function library names of user IOM

    . export synonyms for PUBLIC types

    . export synonyms for private types

    . export definitions of object type for the IOM user

    About to export objects of PRD_OIM...

    . export the database links

    . export of sequence numbers

    . export cluster definitions

    . about to export tables of PRD_OIM by conventional means...

    . export synonyms

    . export of the views

    . export of stored procedures

    . export of operators

    . export of referential integrity constraints

    . export of triggers

    . export indextypes

    . image bitmap, functional and extensible index export

    . export of posttables actions

    . export of materialized views

    . export of the instant newspapers

    . export the work queues

    . export of groups of refreshment and children

    . export of dimensions

    . export actions and procedures of post-compilation schema objects

    . export statistics

    Export completed successfully without warnings.



    Why this command do not export continue lines?


    And I try this method:

    expdp system / * schemas = dumpfile = exp_u.dmp OWNER_NAME

    and this

    exp system / * QUEUE = export.dmp GRANTS = Y INDEX = LINES Y = Y OWNER STATISTICS = NONE LOG = oim.log OWNER_NAME =

    and I have the same result.

    Any suggestions?

    Hello

    The journal you have shown is not associated with TABLE exported. I suppose that the user who you specified does not all tables. Can confirm you.

    Check the result of the following query:

    To connect to the specified schema and run the following query:

    Select count (1) from user_tables;

  • Is cloning with disk utility (10.11), reliable? Can you do trust sound check?

    I cloned a 4 to with bad sectors (according to DriveDx) and a new 4 to. The drive is successfully verified. Can I trust the contents of the new drive? If the player has verified that means that bad sectors were readable, or just that copied by the damaged disk data utility "with success."

    Another thing, when I started the computer, Time Machine does not recognize that the new disc is a clone of the previous and delete all backups of the previous player (nice one Time Machine)... so now, only two copies of my entire life are these two 4TBs...

    Check it to learn how to move your Time Machine backup on another drive:

    Time Machine: How to transfer backups from a current backup disk to a new backup drive - Apple Support

  • RMAN problem with disk space

    Hello

    Oracle 10g

    I create backup rman complete daily and my REDUNDANCY of RETENTION POLICY is set to 2, for example

    FORMAT of COMPRESSED BACKUPSET "F:\BACKUP_DB\DB_%d_%u_%s_%T" INCLUDE CURRENT CONTROLFILE AS BACKUP DATABASE;
    CROSS-CHECKING OF BACKUP;
    DELETE NOPROMPT OBSOLETE;

    My backup drive is 100 GB and now I don't have enough space for 2 backups. I do not have enough free space because Oracle first create new third backup and then with DELETE NOPROMPT OBSOLETE it delete first.

    Because I do not have another disk space I put new line in my script, rman - REDUNDANCY OBSOLETES DELETE = 1; i.e.

    DELETE NOPROMPT OBSOLETE REDUNDANCY = 1;
    FORMAT of COMPRESSED BACKUPSET "F:\BACKUP_DB\DB_%d_%u_%s_%T" INCLUDE CURRENT CONTROLFILE AS BACKUP DATABASE;
    CROSS-CHECKING OF BACKUP;
    DELETE NOPROMPT OBSOLETE; + / / I think that this is now not needed.

    Now, before that Oracle creates new backup removes the older. This in my opinion is not the best. This, I'll have to new two backups but Oracle erase the old backup before it create new backup successful... Another problem is that Oracle with DELETE NOPROMPT OBSOLETE REDUNDANCY = 1 deletions and my ARCHIVELOG files.

    What is your opinion?
    You have a better solution?

    Thanks in advance!

    Published by: user9106065 on January 12, 2011 04:36

    Catch-22.

    You do not have enough space to contain 3 backups but you don't want to remove No. 1 after backup n ° 3 is finished.

    You can't have your cake and eat it too.

    Allocate additional disk space - for example cheaper storage or a network drive.
    Transfer the older backup to the additional disk space.

    Hemant K Collette

  • Strange problem with flash.utils.Dictionary

    I have problems to work with a class AS stretching from dictionary. Here is a small code snippet that represents my problem:

    package
    {
    import flash.utils.Dictionary;


    SerializableAttribute public class DI extends dictionary
    {
    public void DI (weakKeys:Boolean = false)
    {
    Super (weakKeys);
    }

    public function setStuff (): void
    {
    var d: Dictionary = new Dictionary();
    var key: String = "CreationClassName";
    var val: String = "D13BCOR1";
    d [key] = val;
    Item [key] = val;
    trace ("key/val =" + val);
    }

    }
    }

    Note that the line

    d [key] = val;

    works very well.  However, the line following

    Item [key] = val;

    gives me a runtime error:

    ReferenceError: Error #1056: cannot create property CreationClassName on DI.
    di / setStuff ([C:\jberry\workspaces\rnx\ActionScriptTest\DI.as:18])
    at ActionScriptTest() [C:\jberry\workspaces\rnx\ActionScriptTest\ActionScriptTest.as:9]

    Y at - it a different syntax than what I use to fix a combo of key/value for a class that extends the dictionary?

    FYI, the code that calls him above looks like this:

    public void ActionScriptTest()
    {
    var di: DI = new DI();
    di.setStuff ();
    }

    Thanks in advance for any advice/suggestions.

    Joe

    Try the public dynamic class DI.

    Make sure that the dictionary is not "final".

    Alex Harui

    Flex SDK Developer

    Adobe Systems Inc..

    Blog: http://blogs.adobe.com/aharui

  • Problems with disk cleanup.

    I used the disk cleanup or immediately after a message box said unregonized files there. When I clicked on the retry, it says to insert the cd that I don't have. This xp service pak watch 3 is here.

    Hello

    What are the unrecognized files?

    This problem occurs if the disk cleanup not installed correctly. I suggest that you have Windows XP disc and use the Windows XP disk to run Disk Cleanup, and check if the problem occurs.

Maybe you are looking for

  • Gigashot GSC-A40FE records no more

    Since today my Gigashot A40FE (only 1.5 years) suddenly doesn't capture any more images. Items menu and other info (on the rest of time registration etc.) are displayed on the screen, but it doesn't show any picture of the scene; just a black screen

  • Satellite Pro P200: Sometimes screen loses her colours

    I have a Satellite Pro P200 running the operating system Vista Business and at random times the losses of its color screen almost as if it passes at a lower resolution of color. There is a bit of flickering of screen.To get the screen back to normal,

  • NB100 - blocks if I try to open a Web site

    good day to all, I have a problem with my toshiba NB 100... the OS using my is the original version of winXPrecovery CD... all the site does not work well... Yahoo.Messenger, Firefox.youtube, but when I open the www.multiply.com it freezes and I have

  • problem HP DVD RAM UJ892

    Product name : HP Pavilion dm4 Notebook PC (1204TU) OS : Windows 7 Ultimate 32 bit Service Pack 1 Problem : HP DVD RAM UJ892 Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  • Problems with its Satellite A300 controller

    Hi all! I have a weird problem with my sound regulator in A300. When I use 'wheel' in front of the laptop, next to the headphones of entry etc., sound turns upward and downward very irregular - I try to turn up the volume and it jerks around a consta