Problem with dual monitors since upgrade to W7

Similar Questions

• Problems with dual monitor: VGA is out only work

  I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and the cables and update of my computer, I had more than one screen. I went out and bought an asus hd 6450 and installed in the hope that I would have my screen. no luck I checked all the settings again and nothing. I ran the program provided with the card and so far nothing. It is not even read a different location for the screen. can someone please?
  Operating system
  MS Windows Vista Home Premium 32 bit SP2
  CENTRAL PROCESSING UNIT
  AMD Phenom X 3 8400 42 ° C
  Tolimán 65nm technology
  RAM
  1.50 GB Dual-Channel DDR2 @ 267 MHz (4-4-4-12)
  Motherboard
  ASUSTek Computer Inc. NARRA3 (Socket AM2) 44 ° c.
  Graphics
  Monitor Non Plug-and-Play generic (1024x768@60Hz)
  ASUS EAH6450 series (ASUStek Computer Inc.) 50 ° C
  Hard drives
  625 GB Western Digital WDC WD64 00AAKS-65A7B SCSI Disk Device (fiber)
  Optical drives
  ATAPI DVD A DH16A3L SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  I took the liberty to do a little research on the ASUS HD 6450 map.  Are - what you got to get the ASUS HD6450 silent and low GPU or the bigger one with the fan?  It might be possible that those silent will not support Eyefinity technology since it was modeled for the home theater PC use.

  I noticed that the model with the fan on the radiator mentions he is compatible Eyefinity, while the silent model does not work, but it allows you to choose between a VGA, DVI or HDMI port, but do not use them simultaneously.

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Problem of dual monitor arrangement screenset

  Hey all, Logic Pro 9 for a long time user, recently upgraded to X (long) and I'm having some trouble with my arrangements.

  9, I had an arrangement of screenset of the window of the mixer to my left monitor and the arrangement for the right, all maximized window, they filled the windows and when I close and open a new logic project, the windows would open up on the correct monitors to the right size.

  Since going to X, whenever I open a new document, the windows are open on the right monitor, I saved the correct arrangement in a model, I locked the screenset, but I can't seem to work around the problem.

  If anyone has experienced this problem and has advice, I would be very happy!

  -OSX 10.10.5 Logic pro 10.2

  Once I had a few problems with the screensets. I had to uncheck 'Screens have separate spaces' Mission control.

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Printing problems HP PSC 1210 since upgrading to Windows 7

  Hello

  Unfortunately, I have major problems since upgrading my PSC 1210 previously hassle to Windows 7 Professional (32 bit) on a Dell Latitude laptop.

  1. connect the USB cable from the system causes to restart almost 100% of the time. (Start with her already plugged the same result.) If it restarts not who does not necessarily mean that it will print. Although the USB connection is identified, the document does not print and gets stuck in the queue; by selecting either restart or cancel in the print queue does not delete it. Or turn off and unplug the printer. I have to restart my computer for him to clear, but it still doesn't work. Also, it gets stuck when I choose to print directly to the printer. More recently, I've only managed to print after closing of all the HP of the process in the Task Manager. (The same problem with restarting forced to plug in the USB cable happens sometimes when the analysis rather than printing).

  2. on the occasions I manage to do print documents, does not print black cartridge, despite having just replaced the cartridge and the perflecty black print on the test page.

  I hope you can help because it's incredibly frustrating and tedious, and I really prefer is not to have to replace what was until what Windows 7 a perfectly good printer!

  Thank you

  Olivia

  Welcome to the Forums of HP savemysanity,

  I see by your post that when the connection of the USB cable, the computer restarts, the print jobs stuck in the queue since the upgrade to Windows 7, the black is not printing from applications, but prints black on the self-test page. I can help you with this.

  Run all the updates of Windows on the computer. Updates Windows Installer in Windows 7

  I have provided a document through the steps to see if this will solve the problem.

  Print jobs are stuck in the print queue.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically.

  Run the System File Checker. This utility allows users to analyze and restore corrupted Windows system files.

  System File Checker: run sfc/scannow & analyze its logs in Windows 7 | 8.

  The chkdsk command or "Check Disk" utility is used in Windows to browse your entire hard drive and find problems.

  Run the Chkdsk utility.

  Try another port on the computer and another USB cable just to exclude.

  If the problem persists, would completely uninstall and reinstall the printer software.

  Uninstalling the printer software.

  Installation of the software of the printer in Windows 7 for a USB cable connection.

  There is no driver to download, drivers are drivers from Windows Update.

  What operating system go you to?

  If you need help, let me know.

  Good day!
  Thank you.

• T520 problems with external monitor resolution

  Hello

  I'm standing right now waiting on hold for a Lenovo tech support rep, so I thought I'd just post my problem here. I just bought a Dell ultrasharp monitor U2713HM and am trying to connect it to my Lenovo T520. We sometimes see the monitor and sometimes it isn't, but this isn't my main problem. The monitor is supposed to be 2560 x 1440, but all the resolution settings are grayed out. I know that the Lenovo can support it because my last screen is a Samsung SyncMaster supporting 2560 x 1440, and it was beautiful (beautiful until the monitor exploded).

  I was on the phone with Dell and Lenovo, and so far nobody has been able to solve the problem. I've updated the graphics driver NVIDIA (NVS4200M) to the latest version (310.90) as suggested by Dell, and I changed the cable VGA to DVI - D cable (connected to the Dual Link adapter), as suggested by Lenovo. He stlil does not work.

  I could use some suggestions. I'm not grumpy at all, so it's quite frustrating. Thank you!!

  
  

• I have problems with my PC since September or almost

  Hello guys, first of all, I want to wish you a happy new year.

  So, as the title says, since September of this year, I had problems with my PC.  When I turn on my PC, it works for 10 seconds (until the display shows me the following message: 'Welcome!'.) Then, when it is about to happen to my office, my screen goes down (if I can call this an accident) and he shows me a picture with a lot of washed out colors. (I'll attach a picture so you can see what I mean). 1 month, the monitor just crashed when I opened first a game like cs (I mean it crashed once/day). But now I can ' t even not see my office if I reinstall my windows (tried to reinstall (monitor crashed 5 minutes))

  What should I do?

  I bought a new video card and it solved the problem. Thanks anyway!  Happy new year!

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Discover the problem of dual monitors in Windows 7.

  Hi all

  I have a problem on Windows 7, VMware View on two monitors, I can start a windows 7 Enterprise on two screens (extender mode) but all windows browsers or explorers can be moved easily from one screen to another screen, movement within a single screen is fine.

  However, Windows XP does not meet this problem...

  Anyone have the same problem and how can I solve it?

  My infrastructure: view vSphere vCenter 5.0 5.0 5.0

  Samson

  I've lived the same problem after upgrade to view 5.0 and this is what worked for me:

  http://VMtoday.com/2012/07/lag-when-dragging-a-window-between-monitors-in-VMware-view/

  Adding that the Configuration setting as shown it fixed on my dual monitor configurations.

• Help with Dual monitors on Alienware aurora R-4

  Hello ive been hurt trying to get my two monitors set up on my aurora r-4. I currently have two monitors dell that connects a vga while my aurora r-4 has two connections dvi on it. Ive been trying to find the cable I have need for this and can I just get two adapters dvi / vga separately and itll function as a dual monitor?

  Well, you aren't the only one who feels this way. Keep an eye on your cooling system the cooling Aurora 4 pump seems to fail quite often. I replaced my front he did. And many other people did also with a pump of better quality. Discover the Aurora R4 overheating problem SOLVED here chat room!

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them