Problem with Ethernet drivers with Windows 10 compatibility

Windows 10 knocks out my earthnet Microsoft says my dell compatible driver so if 10 windows will fix the problem I will download 10 I'm not used to having to do all the gel and re install my7 auto so get with him 10

< original="" title:="" windows="" 10="">

Hi Mitchell,

Thanks for posting on Microsoft Community.

According to the description, I understand the Windows compatibility check indicates that the Ethernet drivers are not compatible with Windows 10 on your Windows 7 computer. I will definitely help you to solve this problem.

I wish to inform you that the drivers are built by the manufacturer. Therefore, if the manufacturer does not have to build compatible with the upgraded version of Windows drivers and the compatibility check indicates that the drivers are not compatible so that you might face difficulties with the drivers on the new operating system.

However, you try to install the drivers in Compatibility Mode after upgrading you computer Windows 7-Windows 10. Please refer to the below mentioned steps to install the drivers in compatibility mode:

First download the driver from your computer manufacturer's website and install it then.

SE refer (make older programs compatible with this version of Windows)

http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

Note: This link also applies to Windows 10.

Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

Tags: Windows

Similar Questions

  • Adobe Reader 5.0 with Windows 7 compatibility problem

    Adobe Reader 5.0 with Windows 7 compatibility problem

    version 5?

    use the most recent Adobe Acrobat Reader DC install for all versions

    Clear mcafee, unless you are sure you want.

  • I had a problem with windows 7 so I have 2 Toshiba disk for recovery in vista 64.

    I had a few problems with windows 7 on my Toshiba laptop. A recovery disc were sent and I have vista 64. Should I re install the winows upgrade installation package 7 provided with the laptop?

    Hello

    If Toshiba provided your with an upgrade to Windows 7 for your machine, you would think that it is Compatible Windows 7,.

    But that's the advice I give to posters to follow:

    Follow these steps before installing Windows 7:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    And as you have Vista 64 bit, upgrade, you will need to upgrade to Windows 7 64 bit

    See you soon.

  • Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

    Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

    have you checked on the memory of our pc? Call of duty modern warfare needs at least 2 GB of memory, another thing you need to consider is your video card in your pc windows 7. try to update the first video card drivers. verification of your memory.

  • The problem with Windows update - automatic updates service won't start not (error 126)

    original title: the problem with Windows update

    Please help me to get Windows Update operational return.

    XP Media Center Edition, Version 2002, SP3

    Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
    http://support.Microsoft.com/kb/931852

    Seems to have cleared the error message.  So far so good.

    However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

    I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

    I already followed several instructions on this subject:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

    In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

    I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

    Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

    [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

    [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

    [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

    [4A]... is there a possibility that some of [my data are] infected?

    [4] preventing me from simply infect the whole PC again?

    A1. Yes, and it was my recommendation in August, too.

    A2. Yes.

    A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

    A4a. Yes, a real possibility.

    A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

    If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

    If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

    Once again, good luck!

  • problem with windows mail (using Vista) after automatic updates installed

    After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

    Hello

    Try the following methods:

    Method 1:

    Try to download and reinstall Windows Mail using the link:

    http://support.Microsoft.com/kb/941090

    In the link above, go to download and install the update.

    Method 2:

    Solve problems with Windows Mail

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

    Reference:

    Working with Windows Mail in Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  • Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

    I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

    Since the issue is updated to Windows, it is not a product number key.

    You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  • Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

    Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

    Tried the Canon support? That would be my first port of call...

  • Printing problems with Windows 7

    Since moving to Windows 7, I have problems printing.  What you see is not what you get.  For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size.  I can't print labels because they don't properly space.  NOT SATISFIED WITH WINDOWS 7!

    Friday, April 16, 2010, 05:07:16 + 0000, DeeCaci wrote:

    > Since moving to Windows 7, I have problems printing. What you see is not what you get. For all programs (Word, Excel, Access) - the info is being printed as if it is printing on a 8.25 x 10.25 instead of 8 x 11 paper size. I can't print labels because they don't properly space. NOT SATISFIED WITH WINDOWS 7!

    If you're happy with Windows 7 is of course your choice.
    but I would point out that the problem you are experiencing is not a problem
    with Windows 7. The problem is with the driver that you use for your
    printer (and drivers are written by the printer manufacturers, not by)
    (Microsoft). Either you have the wrong driver or the driver has bugs
    it. or you can use the wrong driver.

    It's just a guess, but my guess is that you have the wrong driver.
    Check with the manufacturer of your printer, either by phone or on their web
    site for the right pair.
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
    Ken Blake

  • Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

    I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

    The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

    The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

    Hi ancientone618,

    It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

    http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

    In addition, please see the article with some useful information:

    http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Problem with Windows 2008 Enterprise

    Hello!

    I have a problem with Windows 2008 Server. I have a server with the operating system and I shared network folders and more restricted to different users. Random users cannot connect to moments share files and then automatically recovers. Remote access to the server is enabled. Sometimes I can connect to the server sometimes didn't. Below is a photo with a message.

    Hello

    Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

    http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

    Thank you.      :)

  • are you call customers regarding a problem with windows

    I got a call this morning from someone who claims to be from windows. They told me that here was a problem with windows years asked me to connect to my computer and give them permission to do something to the computer - I declined. Could you please confirm if there is a problem and if the contact was authentic.

    Thank you

    You have made the right choice to reject the call. It's a SCAM well known and is FALSE. Microsoft and partners will NEVER user calls unless you ask them to call or to open a support case. On the other hand there is no way for Microsoft to know who has a problem with PC. Take a look at:

    http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

  • I have problem with windows update

    I have problem with windows update

    and I can't find the Hebrew pack in windows update?

    I have windows 7 ultimate

    You use this procedure: http://support.microsoft.com/kb/972813 ?

    Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Problem with Windows Installer (I think)

    Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

    Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

    So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

    Yoris,
    I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with windows update and Service pack 1 for Vista 32 bit.

    A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

    ------------------------------------------------------------------------------------
     
    A problem with Windows Vista
    Windows Vista has stopped working properly.

    This problem has been corrected in Windows Vista Service Pack 1 (SP1).

    What is a service pack?

    An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

    To resolve this issue, follow these steps:
    Determine if your type of operating system 32-bit or 64-bit.

    How will I know if my system type is 32-bit or 64-bit?

    Click the Start button, right-click computer, and then click Properties.

    Under system, you can view the system type.

    The average of 32-bit and 64-bit?

    Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

    For more information, go online and read this article for Windows Vista online help:

    32-bit and 64-bit Windows: frequently asked questions

    Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

    Windows Vista Service Pack 1 for 32-bit systems
    Windows Vista Service Pack 1 for 64-bit systems
     
    -------------------------------------------------------------------------------

    In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

    In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

    Ralleny,
    Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problems with Windows Update after uninstalling SP2 (Vista Home Premium)

    Hello, everyone!

    Two days ago, I tried to install SP2 through my Windows Update. During the installation and then restart, it stopped on step 3 (0%), ignored and open Windows normally. But, I realized that I had totally lost Aero (I didn't even have the option in the window color and appearance), and also Windows Update constantly gave me the message that I always important updates - SP2 has not installed correctly (I rebooted the computer several times to try to resolve this problem, but everything remained the same: stop on step 3) ", running Windows, and once again the message that I've updated important). I searched in various forums, but could not solve the problem, so I decided to uninstall SP2 via Control Panel. But it doesn't let me do that - whenever I clicked on the button uninstall, it says that the installation is not finished yet. So, I tried the system restore, but whenever I clicked it, an error message (that I didn't understand at all) appeared. So, I went into safe mode and tried the system restore and it worked (Control Panel uninstall option does not in Mode safe either), and everything is back to SP1. But now I have problems with Windows Update - I get the error message 0 x 8007002 (and even 0 x 8007005 several times). I tried everything I could find in the forums (the thing with automated updates service does not because I don't have this option in Services), but nothing works. If anyone has any advice whatsoever, I would be really grateful for that, because I don't know what to do.

    For safety, I use NOD32 anti virus, Tall Emu Online Armor and ThreatFire.

    Thank you very much!

    Hi EvanaZgb,
    Thank you for visiting the Microsoft Answers forum.

    I would say to first disable the anti virus and other security software. Then proceed as follows:

    STEP 1
    ------------
    Download and install the latest version of Windows Installer
    To install the latest Windows Installer, visit the Microsoft Web site at the following address:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Step 2 now try to update again and post back with the results
    ------------
    Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Now try to update again and post back with results

    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for

  • 7 - the iPhone with camera problems

    Hey guys,.UST bought the new iPhone 7 and I already have problems with it, specifically with the camera.It's already happened seeral times more that when I open the camera the camera itself App would not focus or react; Instead, simply, you would see

  • Ridge SVFA and the Relative Phase amplitude must be reentrant

    I think I found an obscure problem with one of the "Baseband FFT" s VI on the 'Frequency analysis' subpalette of the Sound and Vibration Measurement Suite. " The "Peak Amplitude and Relative Phase SVFA" is set to no reentrant run, but I think it must

  • HP Pavilion dv6-6c35dx: CD player does not

    My cd player does not work and this is the message I get from Device Manager. Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  • Play a disc on an HP with Windows Vista

    I have a HP Packert with Windows Vista. I had some learning CD's for my daughter who say use with Windows 3.1 x or Windows 95, does that mean that I can't use these discs is because I have Vista? They say Windows 3.1 or higher, but yet when I put the

  • Missing the download button for my application on request BB 10 Dev Alpha App World

    I created a new version of my 'Speech Timer more' application to make it compatible with BB10 Dev Alpha. It has been approved and is now available on the App World for Playbook and BB 10 Dev Alpha. I could download on Playbook. But there is no downlo