Problem with external monitor when used with the Satellite P100-434

I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

_I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
You have some problems with the resolution of the external display or what?

I've found another thread on the setting of the external screen as main screen:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

According to this statement:
> In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
It seems that the external monitor has been on the main screen and display books internal as external.

I recommend you change this settings and to use books appear as 1 and the external display form 2.

Tags: Toshiba

Similar Questions

  • How can I keep the laptop and find only the external monitor when I close the lid?

    Original title: external monitor

    I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

    I want to use an external monitor with my laptop Vaio Windows 8, but when I close the lid, both screens will disappear.  How to keep your computer on and display only the extgernal monitor when I close the lid?

    Hello

    Perform the following steps.

    1. press the Windows key + X to display the System menu.

    2. Select Control Panel.

    3. Select the Power Options.

    4. in the left menu, select Choose closing the cover .

    5. look in the section of power and sleep buttons and lid settings .

    6. use the drop-down menus of the section when I close the lid , and then select do nothing for both options.

    I hope this helps.

    Concerning

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • Unknown problems with my Satellite P100-221

    Hello all;

    My laptop Toshiba PC100-211 will not work properly and because the customer service is very far from my location, so first I want to understand if the problem is due to a software or hardware failure so decide to manage.

    I've listed my observations and difficulties in list below:

    (1) internet connection very slow irregular (I checked my internet connection with my friend's cell phone is ok, so the problem causes by my laptop)

    (2) sometimes unreadable screen (yellow traps and sometimes mathematical identical symbols as radical, @,...) in this case the message that windows cannot start no t properly appeared, and then I have to start my laptop in safe mode.

    (3) 4 months ago when I connected to the internet, found the connection problem with the sound as chick chick and I couldn't type the address because the default address is hide constantly and appear and can not select it (now I don't have this problem)

    (4) sometimes the system hung with black screen and no action and I have no chance with the exception of the removal of the battery and restart the computer.
    In this case if I leave it for a long time all of a sudden irregular noise out.

    I used my laptop recovery CD but still I am facing this problem. I'm not sure that I have to reinstall new windows for my laptop (because of the message) or it is a hardware problem (graphics card, modem,...) I have called Toshiba customer service (3 hours driving from my place) and they informed me that they will check and if they find any hardware problem, that they cannot do anything because we bought in the Middle East and we now live in K.L, East Asia!

    Hello

    I find your model of laptop Satellite P100-211 and not PC100-211.
    Is this good? The model number is placed at the bottom of the unit you can check it again.

    With regard to the unique points:

    (1) what connection are you using? WLan or LAN?
    You said its hollow; how little it is? You have values? Have you contacted your ISP that provides access to the internet?

    If you are using WLan, then you should try to update the BIOS and the WLan card driver in many cases, it helps to settle such questions

    (2) possibly it of a question of Windows operating system, if you need safe mode.
    Maybe a new installation of the OS would be useful to know what causes this problem.

    (3), it s really hard to say what s this might be or what caused this problem but it this issue is no longer seen so don t be worried ;)

    (4) as I recommended in the point 1) trying to update BIOS and perhaps a graphics card driver.
    Check if it helps.

    See you soon

  • Displays swap when using double view Satellite P100

    I have a Satellite P100 - 434 (PSPADE). I am using the laptop as main display and an LCD as a secondary monitor. I found that no matter how to configure it, using either the Vista view properties or via the Nvidea Control Panel, I get a problem where the monitors periodically switch.

    I'm not bothered what device is the main, but the system to compensate for his mind would be really useful.

    This seems to happen when I type, making me wonder if there is press key I am inadvertently trigger that causes to happen. Ideas anyone?

    Hello

    You should do the following:

    -update your bios to the latest available version
    -update your display drivers and all the other remaining drivers in your system to the latest version available
    -Maybe if the driver update Don t really help out you, recover your machine with the recovery media and check if the error reappears.

    IF all these steps didn t worked for you, then come back and we'll discuss it further. :)

    Welcome them

  • Problem running 4,80 Bios Update on the Satellite P100-473

    Hello
    I have a satellite P100-473 enriched with 4 GB of ram, using ubuntu 10.04 lucid 64 with nvidia driver.

    Problem with often increase GPU to high temperature (over 100 ° C) using sensors applet to check.

    I guess that's a BIOS and a driver problem.

    Windows 7 x 64 I don't have this problem with the latest nvidia driver (using speedfan to check the temperature)

    I tried to Flash the bios with the latest version => _Update.exe BD1_BIOS (V4.80) version 4.0, I actually and all flashing same mistake you Error - 121. update of DXE etc...

    While the .exe to extract the contents of the flash on your c:\tmp I'll try a bios flash with a bootable usb key and phlash.exe with the BD13C43. WPH.

    The problem is to find the phlash.exe official back... Phoenix does not provide such tools ;(

    I understand the need of simple bios flash on windows... but I don't understand the .iso missing for flashing at the start when the operating system does not match...

    If you have an idea thanks ;)

    Toshiba has offered traditional old BIOS updated (diskette), a long time ago. Now you can find WIN updates only.
    You can try to contact the closest service Toshiba and ask if they have traditional BIOS update.

  • Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

    Guys,

    I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

    Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

    Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

    Can someone help please that it made my head that I can't understand what the hell is the cause!

    I've included a list below all the different resolutions / screen modes I tried it and the result.

    Thanks for your time & help.

    Concerning

    Craig.

    1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
    59Hz - constantly flashing black screen
    60 Hz - constantly flashing black screen
    75 Hz - screen flashes black only when resizing windows

    1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
    59Hz - works great
    60 Hz - works fine
    75 Hz - works fine

    1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
    59Hz - screen flashes black only when resizing windows
    60 Hz - screen flashes black only when resizing windows
    75 Hz - screen flashes black only when resizing windows

    1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
    59Hz - no option
    60 Hz - works fine
    75 Hz - works fine

    1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
    59Hz - works great
    60 Hz - very rarely flashes black when resizing.
    75 Hz - intermitantly flashes black when resizing.

    1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
    59Hz - works great
    60 Hz - works fine
    75 Hz - works fine

    1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
    59Hz - works great
    60 Hz - works fine
    75 Hz - works fine

    Hello

    I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

    I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

    Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.

  • Someone at - it problems with the Satellite Pro C650 battery?

    Any other owners have problems with their batteries?
    Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

    Has been using MS Word in the last few days - and had to plug the laptop in an hour!

    Hello

    We need to change and optimize battery usage settings.
    This is possible in power management.
    You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

    The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

  • Connection problem with the satellite C660 - 24L

    Hello world

    I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

    Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

    A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

    Computer behaving the same way when connected and disconnected from the mains.

    All other devices will connect to the router talk-talk with no problems.

    Any help is appreciated, thank you in advance.

    Lewis.

    Post edited by: lewlew

    Have you noticed a few problems if you use the local network connection?
    Original Toshiba WLAN driver is pre-installed on your computer?

    To be honest, it is not easy to say why this show is starting to happen so suddenly.
    Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

  • Some problems with the Satellite A210 - 11 p

    I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

    1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

    2. the screen turns off after approximately 2 minutes after the connection.

    3. any ideas where I can buy a new charger?

    Can you help me?

    Thank you
    Mike

    1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
    2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
    3. I think an ASP can sell you a.

  • Problems with the Satellite A-210 camera

    Hello. I have a problem with my webcam, sometimes it's not ok. Sometimes I can use in the Messenger, but sometimes show me a problem and I can't use it. Display a message as I am using the camera in another program but is not fair. Can you help me? If is posible, response in Portuguese or Spanish, my English is terrible. Thank you. Antonio

    Have you already installed Vista SP1? Help with questions web cam.

    But let me ask you, what is the exact message when windows says that the camera is already in use? Perhaps you might find on the other program that way.

  • A few problems with the Satellite L300D-243

    Hello

    would be very grateful for help as soon as possible with my laptop. IM of the problems a little with it including:

    -All keys work intermittently and are rarely and when they do they print about 5 or more at the same time or just Don't stop.
    -Constantly locking me (so with the key to deliver its impossible to get in half the time)
    -Seems randomly reboot without doing anything
    -Regularly crashes
    -Uninstalls programs for example. Google chrome and itunes.

    As soon as you turn it on, it does not work and comes up with the black screen with white writing to tell you if you're lucky, it will allow you to click it and system repair

    However, most of the time it used to let keys work and so not let you do anything.

    Any help would be greatly appreciated
    I have so many courses and for studies but can't without my cell phone.

    Thanks in advance :)

    Hello

    How old is your laptop or how much time does the system work on this unit?
    You has never updated the OS?

    I guess that the laptop has not been restored since the purchase. Right?
    Probably the OS is simple confused upward.

    Before you begin the recovery process I recommend to test workarounds bit.
    -Try to clean the system using the software CCLeaner. The CCLeaner is a freeware program that allows you to remove all temporal files and to repair the registry.
    -As a next, you should check the background processes that are running in the background. This can be checked-> the Startup tab in msconfig (in run type msconfig)
    In many cases, the system may be slowed down due to the high amount of processes that are running in the background. But be careful and don t turn off the process that are not known to you.

    But if you are not experienced in these system settings, you should ask someone for assistance or as suggested by Timox, recover the laptop back to factory settings.

    But beware: back up the data before you start the restore!

  • Problem with the Satellite C850/c850D touchpad

    Hello

    I just bought a PC toshiba laptop c850/c850D this week, and the third day, when I was watching my touchpad mouse with chrome starts to panic.

    I could barely control the mouse with the touchpad, it kept "shooting up" at the top of the screen.
    I rebooted the system to get the touchpad working not all (mouse key on laptop included).
    When I plug in an external mouse via USB, it works very well.

    I tried the shortcuts F5 (turning the touchpad on the laptop market)
    I have the mouse controls. Where the mouse USB and the touchpad is visible. He said only that it works properly, which is obviously not.
    has taken a printscreen: http://i49.tinypic.com/2m4vebt.jpg

    I even went as far as restoring the computer to the factory settings by pressing f8 whilest reboot etc etc.
    The touchpad mouse doesn't always work...

    It works under windows 7.

    Could someone please help me understand how to get my touchpad working again?

    See you soon,.
    Toby

    Post edited by: junction box

    Hello

    The F5 turns the touchpad on and off
    Please check if the touchpad is not disabled.
    You can also visit the Toshiba UE driver page to download the latest driver for touchpad
    The update of the touchpad driver solves many problems of touchpad.

  • A few problems with the Satellite U920T-100

    Hi guys,.

    my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

    The questions are:
    -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
    -It starts not at all, only after a few attempts
    -It will not stop
    -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

    New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

    Also: WLAN connectivity is really bad.
    The laptop is not able to find networks, while my laptop has no problem with it.
    And when he finds them and connect, the connection be lost - once again: no idea why.

    That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

    I have reset factory?
    Run through some specific tests?
    Or is is hopeless, because there are so many problems with it?

    I'd appreciate your help!

    Hello

    > I should factory reset it?

    I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

    Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

    From my point of view, the recovery of the system is the first step, you should try to solve the problem.
    In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

    Hope my advice might help you a bit

  • Problem with the Satellite A300D - 14 p

    Hi all!!

    I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

    Maybe that's the problem of processor, and I need to update drivers...! What do you think?

    I look at my CP CPU load is 100% the two core, when I play this game!

Maybe you are looking for

  • Satellite Pro M30: connection problem!

    Hello After I connect to the Internet via modem, the machine (specifically, the status bar) freezes. In addition, could not start the MSN (6.2). After about 10 minutes, the system works normally and very well. Help, please! Data sheet:Satellite Pro M

  • How to connect 2-wire extensometer to NI 9237 of watchkeeping

  • A form of Google with http POST VI

    Dear LabVIEW forum, I'm filling out a very simple form of Google consisting of 4 text fields named AI0 AI1, AI2 AI3. I use the http POST provided by LabVIEW VI: When I run this, a new row is added to the answer sheet, but values do not appear, with t

  • My startup noise and shut down sound is missing

    My start and knew low noise is absent. The rest of his work ok. I have worked on this problem for some time and have tried everything I found on the internet Microsoft form other sources. Sewing of every thing to be turned on. Could this be something

  • U2713HM does not start?

    After a power outage, my DELL monitor does not start again. What can I do?