problem with Fallout 3 d3dx9_38.dll

Similar Questions

• problems with explore vista msvcr90.dll

  We have Vista running SP2 whenever one of the accounts on an error message appears which says that explore vista has stopped working and restarts. The fault seems to be with the file msvcr90.dll - How can I solve this

  Thank you

  Hello

  • What were the changes made before the problem occurred?
  • When you receive this error message?
  • What is the full error message that you receive?

  You can view these methods:

  Method 1
  Please check if you are facing the same question when working in safe mode.
  Step 1 Mode safe
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  6 do whatever tasks you need and when you are done, reboot to return to normal mode.
  
  Steps 2. Clean boot
  If the question had existed in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  Method 2:

  Try the SFC scan on the computer.
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
  Reference:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Problem with windows7 "NVCPL. DLL not a win32 application valid?

  Problem with windows 7. I get the following message to start upward. "NVCPL.COM" an application not valid win 32. Try to install Microsoft

  FSX. It won't install even though it appears in the control panel being installed. Finally, I just uninstalled the program. I came from Radio Shack in the original packaging for a Microsoft it checked with the appropriate product key. Any thoughts would be greatly appreciated.

  Bill Foushee

  Looks like this file belongs to Nvidia video drivers. Uninstall, and then go to the Nvidia website download again. Then reinstall them using

• Problem with the help of DLL functions

  Hello.

  I'm writing a DLL that calls the functions of a DLL camera and them ends and passes of LabView. I wrote some code of practice and the dll of passage of functions and events with Labview and LabWindows/CVI DLLs, so I like to think I have a reasonable understanding on what I'm trying to do. However I keep getting errors in calling the functions of DLL functions camera I want to use in my DLL.

  I have two functions in the camera DLL, XC_AddImageFilter, and XC_RemImageFilter, I would like to wrap and put at disposal in my DLL. When I compile I get the following errors:

  2 link project errors, Undefined symbol '_XC_AddImageFilter' referenced in "ImageFilter.c". Undefined symbol '_XC_RemImageFilter' referenced in "ImageFilter.c".

  I tried to tweak the prototypes in my header file and the change in functions but nothing I try seems to work. I connected the camera DLL in my project in a way that was previously successful with another practice DLLs and I browsed this forum for similar problems, but I can't seem to find a soloution.

  Thank you for taking the time to read this. I hope that you will be able to help me with my problem.

  PS I had problems to join my code so I put an extension .txt at the end and apparently has worked so please forgive the suspicious file extensions.

  Sorry!

  I do not understand the Labview.lib file which is why Labview functions weren't working! Duh!

  #begginer errors!

• Problem with RUNDLL and sthelp.dll.

  I have windows XP on a small Dell Inspiron.  When I start a dialog box titled 'RUNDLL' appears and has the following message: "error loading: C:\Documents and Settings\...\Application Data\sthelp.dll.» The specified module could not be found. "I downloaded Malware Bytes and run a full scan - it found nothing.  I have been devoted to the application of msconfig, clicked on the Startup tab and tried to disable the checkbox where this dll is called upward, but the operating system seems to want to find when they start the computer.  What can I do to get rid of this nuisance? When I close this dialog (RUNDLL), the computer works fine... it is every time at startup.  Any help would be appreciated.

  There is no XP file called stehelp.dll and Googling, there is nothing reasonable and a bunch of bad ideas.

  Looks like it's a vestige of some malware that has been partially removed from your unspecified brand system and the model with the specified, unspecified XP Service Pack version and not specified where the antivirus/antimalware applications.

  These message types are quite common things to do after that some malware was only partially removed FRO your system, so I suggest the following:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns
  .  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry.  There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Consider making a manual, just System Restore Point in case you have to undo the changes.

  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Do a complete analysis from time to time when you have more time (in hours).

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

• Problems with CANcasXL and vxlapi.dll

  Hi Troy,

  Move forward to what follows,

  https://decibel.NI.com/content/docs/doc-30180#comment-30021

  I am able to transmit messages CAN STD and XTD id with 33.333kBaud.

  But the same with 500 k Baud does not work. I get no error xl library, instead, I get error of stuff.

  For more information, please look at the screenshot attached.

  

  Any help is appreciated.

  Thank you

  Yogesh

  Are you sure that the transmitter device is also configured to 500 k? Have you tried other speeds? Is the CAN network completed successfully?

• Satellite 1900-303: problems with expanded memory

  Hello.
  I just bought a PC2100 DDR - RAM 512 MB (my type of notebook memory) chip to upgrade my memory for laptop. I now have 768 MB. Manufacturer of the chip is Kingston, one of the best manufacturers as I've heard. But now, I get some problems. The system "crashes", my definition of the display remains 640 x 480 with 8-bit color and I got an error message saying that there is a problem with the driver ati2dvag.dll.
  I reinstalled windows, with my restore CD, but the problem remains.
  Any idea on this?

  Hey there,

  Could you please download the driver for display on the site and also could you please update the bios as well

  See you soon

• Problem with message PadExe.exe occurs at boot

  On booting, which takes anything up to 30 minutes and more, I get a message that there is a problem with PadExe.exe
  Padhook.dll seems to be the problem. Put PadExe or PadExe.exe in the search engine on the Toshiba site reveals no response.

  Anyone know how I can fix this problem? I can live with the slow start (just do not cut!)
  Thanks for any help.
  Ray

  This could be a part of the Toshiba Touch and launch software.
  Toshiba Touch and launch offers easy movement and the freedom of navigation of programs with TouchPad
  I see only one way to resolve these error messages. Try to remove this software from the operating system and after removal clean and start you should install it again.

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• Cryptsvc.dll serious problem with Windows Update.

  Hello world

  (Vista Home Premium - 32-bit)
  I'm having a serious problem to Cryptographic Services which will affect my ability to update windows and use my PC. Since all April 24 Windows was not able to update and I noticed that my computer has been running extremely slow. Manager audit tasks revealed that svchost.exe ate about 50% of my CPU at all times.

  When I checked the services running in svchost.exe, I found that Cryptsvc.dll was eating my resources. I finished the process (svchost.exe) and my processor immediately returned to normal. I checked the wires all over the internet and while I see a lot of people have had problems with crytpsvc.dll I can't find someone who knows my specific problem.

  To start Windows Update, this svchost.exe also usually starts and causes the update of Windows hang saying something like "Download x updated. (Total 0Kbs, 0% complete.) and the progress bar continues to scroll, but nothing happens (I left this all night to test and it was the same thing when I woke up in the morning).

  The svchost.exe in question contains generally:
  CryptSvc
  Dnscache
  Tapisrv

  Check the Sysinternals Process Explorer process revealed that CryptSvc was eat the processing power. Also if I manually start this service via; Right click computer > manage > Services - my processor immedietly rises to 50% again.

  I ran many anti-spyware/virus controls, including Microsoft Malicious Software Removal Tool and they detected some small viruses ' but not managed to solve my problem. I tried to register the DLL in question, but I get the error:

  "" Cryptsvc.dll"module was loaded, but the DllRegisterServer entry point was not found. Make sure 'Cryptsvc.dll' is a .dll file or ocx valid and then try again. »

  What sounds horribly wrong to me.

  Unfortunately I can not format my PC because I don't have a copy of windows (my pc didn't come with one) otherwise it would have been my first step.

  If anyone could advise what newspapers you see to help diagnose it, I post them here (don't really know what to do more).

  Help would be appreciated, I'm getting sick of having to kill svchost every 20 minutes to keep my computer running.

  Hi Nick12321

  The link below shows you how to analyze the log file of SFC
  http://support.Microsoft.com/default.aspx/KB/928228

  Perhaps a better way to change the file is to use Notepad instead of modify it.
  Open an elevated command prompt, go to the folder where the sfcdetails.txt file is and enter
  Notepad sfcdetails.txt

  Copy and past the last 30 lines or so back here in the Thread (Post) - thanks
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll

  I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16.  Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.

  Can provide you advice on how I can overcome this problem.

  Concerning

  original title: update windows

  Hello

  Method 1:

  I suggest you uninstall all third-party software and then try to perform the system restore.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  I also suggest to perform a system analysis File Checker.

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Post back with the results for further directions.

• My Windows XP has problems with shlwapi.dll

  My Windows XP has problems with shlwapi.dll and there are plenty of sites to download, but they all want money, why don't misrosoft not has an answer for this problem. When I try to update to internet explorer 6 to explore 8 then the error always pops up saying: you have a problem with shlawpi.dll and he can not continue... Very very frustrating.

  In general, it is not a good idea to download dll files.   See, for example, http://pcsupport.about.com/od/findtheproblem/qt/dll-download.htm

  If you explain more in detail what your problem is, including providing the full text of the error without paraphrase, it is likely that someone in the appropriate Microsoft Answers forum will be able to help.

  Because it seems that your problem is related to Internet Explorer, you are more likely to receive help if you post in the forum Internet Explorer, where there are already many threads dealing with issues of shlwapi.dll on IE: http://answers.microsoft.com/en-us/Search/Search?SearchTerm=shlwapi&CurrentScope.ForumName=ie&CurrentScope.Filter=&askingquestion=false

  If you look through some of these threads, you can find the answer to your question without further delay.  If not (or if you just want to watch), do not forget to include not only the text of the error message, but also the version of Windows XP, you have (Home, Pro, Media Center) and its service pack (start > run > winver > OK).

  And, based on this thread - with what seems to be your exact problem - also include responses to the following questions (there no answer, certainly because the OP has NOT provided to the request for information):

  1. what application or anti-virus security suite is installed and is your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  3 is installed WinXP SP3?

• Problems with picture Screensaver.scr and MSCVR100.dll

  I am running Windows Vista Home Premium on a 32-bit system on an HP Compaq PC.

  Following automatic updates from Microsoft and ATI Radeon, I get an error message when my PC is trying to activate the screen saver.  The screen saver is set up through my library of images and had worked perfectly for four years before the recent updates.  The error message at the start says:

  PhotoScreensaver.scr impossible to locate the component - "this application has failed to start because MSCV100.dll was not found.  Reinstalling the application may fix this problem. »

  Perhaps foolishly, I then bought what I thought, it was a problem of DLL - files.com, a trade name of Cleverbridge.  He said it had corrected flaws 1 200 on my PC (!), but it has not cured THE fault and the following error message:

  Problems with Photo Screensaver.scr - Bad Image: "MSCVR100.dll is not designed to run on Windows or it contains an error.

  I uninstalled the stuff of DLL - files.com and I searched for a solution on Microsoft Answers.  Depending on experience and advice previous users, I uninstalled the previous Visual C++ Redistributable update packages and the ATI update and installed the redistributable Visual C++ 2010.  No improvement.

  Then I tried to restore my PC to a date before the problems, but the restore function did not work and reported that she had failed for undisclosed reasons.  This has happened several times, no matter what point restoration that I use.

  I'm not particularly computer literate, so would like some simple tips on how to cure this.

  Thank you

  Hello

  I suggest you to install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download files according to your operating system version. I suggest you to install all the versions as they may be needed for different programs. Check in programs and features, is what shows you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  I hope this helps.

• How to cancel the (neroburnplugin.dll) its giving me problems with my Mediaplayer.

  Original title: vista

  Thank you, how to unsubscribe (neroburnplugin.dll) its me giving problems with my Mediaplayer.already a mr.fixit and he came to areport from you.

  Vista home Premium 64 Im sorry and not so bright more could you please help me!

  Hi Royce,

  1. What is the exact problem that you face with Nero burning plugin?

  2. you receive messages or error codes?

  3. what Fixit did you run to fix the problem?

  Method 1:

  You can download the hotfix in the following article and check if it helps.

  FIX: Windows Media Player stops responding when you use a Nero burning plug-in

  Method 2:

  If you still experience the problem, then try to uninstall the Nero burning plugin and check.

  You can read the following article to uninstall Nero.

  Uninstall a program

  Hope this information is useful.

• Dialog box: problem with an application mstoolbar wlextension.dll

  Original title: dialog box:

  I am told that there is a problem with an application mstoolbar wlextension.dll

  Hello

  ·          What exactly is the problem that you are facing?

  ·          When you get this dialog box?

  wlextension.dll is a MSNExtension.DLL belonging to Windows Live Toolbar.

  I suggest you to uninstall the toolbar and install it again.

  Refer to: http://help.live.com/help.aspx?project=toolbarv3&market=en-nz&querytype=topic&query=toolbarv3_proc_uninstalltoolbar.htm

  You can post your queries to the Windows Live Forums to learn more: http://windowslivehelp.com/

  Diana

  Microsoft Answers Support Engineer