Problem with headphones in collaboration with audio jack laptop Lenovo touch G510s?

The speakers on the laptop itself work, but when I plug it into any pair a headset or headphones (I tried 5 well known pairs) and it's the same problem each time. The right ear piece works and the left does not. I've uninstalled and reinstalled the driver, nothing helps.

I think it's a hardware problem and it has a warranty until May 30, 2015, but I don't have the time or money to send it offshore to lenovo of difficulty (expensive to send from the military base).

Is there a simple solution like an audio jack usb or something that I can use to be able to use a headset?

You can get a good cheap sound card USB off Amazon and use instead.

Tags: Lenovo Notebooks

Similar Questions

  • Problem with audio on laptop Toshiba Satellite C855D-S5232.

    .. .lately I had ALL sorts of probs with audio... first helmet to quit smoking, has no longer recognized and now external speakers work not and embedded speakers continue to play static. Can you help me?

    Download and install the latest driver 'Sound' on the Toshiba support site:

    http://support.Toshiba.com/support/modelHome?FREETEXT=3386622

    J W Stuart: http://www.pagestart.com

  • Problem with Speedstep on laptop - Lenovo L412

    Hey guys, I have a Lenovo L412, just bought two weeks, with a processor i-3 370 m. at the beginning, the laptop has been installed with W7 Pro 32 bit and speedstep worked perfectly well, where when the load is high, he would show race 2.4 MHz and so low-power about 796 MHz, it ranged from there. However, I wanted to upgrade to Pro 64-bit, so I did a clean, installed all the normal Windows updates, and now includes installation does not seem to work, it is always well a 2.4 MHz constanti, running at the upper frequency. I all CPU Meter and CPUZ to surveillance, that's happened since I did the complete reinstallation of the operating system. I made changes to the BIOS, and there is nothing the Speedstep to work. I tried all power plans, even to change a setting advanced, several things with battery and AC, nothing helps. What can I do? I mean it says no problem yet, but I find a problem, when you constantly run at full 2.4 MHz. In CPUZ, the speed of the Bus shows 133.0 MHz w / 18 multiplier.

    Here is a screen shot of what I speak:

    http://img848.imageshack.us/i/L412.PNG/

    There's always this frequency, do not change any power plan that I use.

    Update: I reinstalled the original system settings, with recovery disks I made, with W7 32 bit and the Speedstep works perfectly fine, but when I clean install with W7 64 bit, it wouldn't work, any suggestions? What can I do here to run W7 64-bit Pro? My system came with a GB of RAM and I get only 3 GB now.


  • Problem with my Acer laptop does not connect to my home network.

    Hello

    I had a problem with my laptop. The laptop does not connect to my home network.

    I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

    My specs:

    Acer Aspire 4250 ongoing Windows 7 SP1.

    Dlink DSL-2730u (secure wifi with WEP 128 bit key)

    Please solve my problem...

    Original title: problems with my Acer laptop

    Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

    If this is the case try to configure WPA2 or WPA rather than fall to WEP.

    Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

    Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

  • Problem with audio Beats and IDT pilot

    Hello! NY name is Sergey.

    My laptop is Pavilion dv6-6c53er. So, I'm a DJ and I use a product of Native Instruments - Traktor Pro (second version). I installed the ASIO driver and I cannot adjust audio parametrs, such as master Chanel and chanel monitor where audio mini jacks will play the sound. I bought this laptop, because there are 2 audio mini-prises... and each mini-jack I use every bridge in Traktor. But when I open the ASIO control panel I do not see what mini Mini-Jack cable... There were:

    Dock HpOut

    Alignment

    MicIn

    MuxedIn1

    It's what I have now.

    Second problem is:

    I found no Audio Control Panel (no Beats Audio Control Panel). I downloaded the IDT audio driver from HP site, then my Beats Audio wasn't available after reboot my system (Windows Home Basic x 64).

    So I got my laptop, but without audio Beats, IDT audio control panel and no experience with Traktor.

    So, please, help me with these problems...

    (1) I need Beats Audio new

    (2) I need IDT Control Panel

    (3) I need experience of how to connect each mini-jack (audio) on each deck in Traktor.

    I really need your help! Please, I beg you!

    Thank you.

    Support forum for Traktor:

    http://www.native-instruments.com/Forum/

    ASIO4ALL support forum:

    http://www.asio4all.com/

    You might want to try Windows compatibility settings before starting your software, its always safe to put things in XP SP3.

    You can also try Windows troubleshooting for flawed software.

    Other that that, you use the software, with I have no experience, their support forums can be your best bet.

  • Problems with audio/video streaming with USB devices on zero clients

    Hello:
    We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

    I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

    I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

    For any help or suggestion would be greatly appreciated.  Thanks in advance.

    We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

    • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
    • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

    Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

  • Problem with audio video

    Hello

    Recently, I downloaded the trial version of Adobe first Pro CC.

    After recording a video with a friend I put it in the first to notice that the audio was falling behind the video. Lets say there is an explosion. You would see the explosion and then to 0. 5 seconds later you'd hear it. At the beginning of the video, it is not noticeable. But as the video goes on it is still worse and worse. This happened since I used it. My friend helped me with setting but it didn't help. When I recorded a 2 and a half minute video, that the audio would be nice, as soon as I record a video of 10-30 m audio falls behind. My friend suspected it could be the transmission speed of the audio. I changed my microphone, headphones and the setting sequence in the first 16-bit 480000Hz, that didn't fix it. When I discovered the original video in windows media player, it is fine. The video is recorded at 1080 p 60 fps.

    Don't forget I use that first for a week or so and only know the basics. My friend has it on his mac book and has not had any problems with it.

    I use windows 8, first is up-to-date.

    Any help is appreciated.

    Audio desynchronization means that the file has variable framerate (no flow)
    Check the file with MediaInfo Windows

    If so convert the constant framerate before importing it with HandBrake

  • Problem with audio BT and I phone

    Problem with incoming car bluetooth connection and calls on the iPhone 6.

    BT Audio is not available for incoming calls on I Phone 6.  The software is up-to-date with IOS 9.3.2 BT Audio works with music, book audio apps but not with the portion of the arrival of telephone calls. I thought it had something to do with iCloud because he was out of storage space and I started to lose the apps. (Waze) - updated iCloud, bought more than place - problem still there. To hear that I have to activate the speaker phone.  If I hit audio car on the phone, no sound and it cuts the music.

    Greetings, MPTP!

    Thank you for using communities of Apple Support. My understanding of your problem is that you do not hear callers on your iPhone when it's connected to the bluetooth feature in your car. I love using the bluetooth connection to my car for hands-free calls. If you do not hear through your car stereo, which defeated the purpose. I'll be happy to help you!

    Here are a few basic Bluetooth troubleshooting steps. - Get help to connect your iPhone, iPad or iPod touch with your car radio

    You can also confirm whether the bluetooth of your vehicle will work properly with your iPhone 6. - iOS: supported Bluetooth profiles

    Travel safe!

  • HP 15 r-045tx: problem with audio driver of hp r045tx

    Hi people,

    I am facing problems using Skype video call feature as it also appears with a message "problem with recording devce" or a "problem with the playback device. and secondly, I also used audition Adobe and in that also, I faced the problems with the audio driver.

    and every time this problem occurs that the speaker in the lower right corner icon displays a message "the audio service is not running" and solves the problem at the opening of the troubleshooter, but even once, when I use Skype it reappears.

    I have this major problem. can someone help me please?

    Hi there @shivam17,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you have a problem with your audio files on your system when using Skype. I'm happy to help you with this.

    Having other problems with the sound, or did when you try to use Skype?

    Here's something I found regarding this issue of support of Skype Forums:

    Problem with playback device?  -community.skype.com

    More down this page is a post which includes the following which I included verbatim. Give it a try.

    1) go to control panel.

    (2) place material and audio.

    3) click on the sound.

    4) click on your speakers by default, then select as "default speakers."

    (5), click Properties.

    (6) to go to the "Advanced" tab

    7) click "Restore Defaults".

    Tip: Do not forget to press 'OK '.

    You're done with the part of the system!

    (1) now go to Skype.

    2) go to tools > Options.

    3) click Settings Audio.

    4) click on the green button with the arrow. If it works, you are finished. Or, click the menu drop down and select your default speakers. If it still does not work, then read on.

    5) click 'Show Advanced Options '.

    (6) select your speakers by default, and then click on move upward, until it is at the top.

    (7) test your speakers!

    Tip: Do not forget to save.

    Let me know if it works for you.

  • Satellite P100-487: problem with audio drivers for Windows XP Home 3.11.0.51 - entered

    Hello

    I have problem with this audio drivers 3.11.0.51. The problem is that the output works perfectly but there is no entry.

    When can I expect from the good work on Toshiba support drivers?

    My way to have entry and exit works well is: first install 3.11.0.51 drivers from Toshiba site to install Support Intel 3.14.0.50 and do not restart after the installation. It's hard because every time when I restart the PC I have to for this making begin.

    Anyone have the same problem and found another job drivers?

    Thank you

    HI Supportneeded,

    You gave me the trick with the driver to resolve the problem in the next restart.
    And I replied to your thread Thursday evening at 20:30. Ask you Toshiba phone when we can expect new drivers. (I have a Satego P100-10F) I added a complaint of litte that Toshiba should also support a 'old' OS like XP. And after that at 21:00 the detachment was completely absent.

    Anyway, I tested some drivers of other manufacturers and other Chipsetdrivers, still the same problem.
    the sound with this material does not work on XP due to a rather bad.

    Of course, toshiba brings out a new driver that will feature at the end of February, but now it is March and I see nothing. (stop: a new driver for Windows Vista is online since yesterday)
    I had it installed on xp and the sound is completely down. Whether in - or output.

    you already called toshiba support when they expect our problems?

    Greetings

    [Edited by: admin on March 17, 2007 17:03]

  • Satellite L670-1HD - problem with audio interfaces USB 1.1

    Hello

    I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
    When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
    You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

    I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

    Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

    Thanks in advance for the help!

    See you soon,.

    Stefan

    Hello Stefan

    In my view, you see the problem from the wrong point of view.
    Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

    You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
    Something like that is definitely not possible.

    In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
    They should know how the device should work on new laptops with USB 2.0.

    It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

  • pavilion23: new HP Pavilion 23 videos are all green, no problem with audio

    Brand new HP, videos are all green, although there is no problem with the audio.

    Hello

    If you are using Internet Explorer, try the following.

    Open an Internet Explorer window.

    Hold down the alt key and press x, and then select Internet Options.

    Select the Advanced tab, enter a check mark in the box "made software use instead of GPU rendering', then click on apply then Ok to save this change.

    Close all the open Internet Explorer Windows, then open it again and try to play a video.

    Kind regards

    DP - K

  • Problem with Audio HD Coexant & Windows 7 drivers

    Hello. I have problems with the Conexant HD audio drivers in my HP dv633nr laptop. I just installed Windows 7 Pro through the MSDN Academic Alliance, and now Windows is indicating that the driver is not certified digitally. I tried uninstalling and reinstalling, but I always get the same result. I need help. All my other drivers worked. Thank you.

    Forum Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads

    Link above is "Preparing for Windows 7" Forum.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro/

    Link above is Windows 7 Forum, to more technical questions about windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Problems with audio CDs, burning on Windows 7 with VMWorkstation 9

    I can not burn audio files with my current setup using VMWare 9.0.2

    The host OS is Windows 7 (x 64) and the guest operating system is Windows 7 (x 64). On the host, I can create audio CDs using Windows Media Player or Nero 9 Essentials.  When I try the same operation on the client, both programs cannot write to the audio CD.  The host drive is a SATA Blu - ray burner.  I connected it to the virtual computer as a SCSI disk using these settings and Legacy Emulation is turned off:

    SCSI1.pciSlotNumber = "224".

    SCSI1.sasWWID = "50 05 05 6 d 66 52 4 b 50.

    SCSI1. Present = 'TRUE '.

    SCSI1.virtualDev = "lsisas1068".

    SCSI1:0. Present = 'TRUE '.

    SCSI1:0. FileName = "G:".

    SCSI1:0. DeviceType = "cdrom-raw"

    I tried writing files of data of the virtual machine on a CD in the drive to Blu - ray in the host using either Nero 9 Essentials or directly with Windows 7 and do drag characteristic and files data write and verify correctly in the virtual machine.

    As a test, I borrowed a USB DVD drive and plugged directly into the running virtual machine.  After Windows 7 it is detected in the virtual machine, I tried Windows Media Player and Nero 9 Essentials to burn audio CDs from the prompt and it has worked.

    What should I do for the virtual machine to make it work with the internal drive to the SATA controller when creating audio CD?

    This is certainly a bug with Audio CD burning.

    I have re-installed Workstation 7 and 8 of the workstation and verified that the problem did not exist in older versions.

    I tested with 9 Workstation, workstation 10.0.1 and fails audio CD burning.

    This was reported as a VMWare bug (13403576911 application) to build 10.0.1 and although it might not be replicated at VMWare, they have managed to fix the problem and I confirmed the fix works on my hardware.  The fix should be in the next update of VMWorkstation which I guess will be 10.0.2

  • Problems with audio playback on mobile devices

    Each project we export and reading on mobile device has a problem.

    We hear only audio track 2 off maybe 3 on different projects. Our audio tracks are stacked like this:

    Track 1 - camera Audio / dialogue

    Track 2 - music

    Track 3 - sound design (some projects, not all)

    None are dumb or the solo. Mounting on Windows 7 and using the YouTube 1080 preset for export.

    Someone at - it a problem with this and how to solve?

    This looks like a problem of audio phase, see:

    Re: audio missing on vimeo and youtube

Maybe you are looking for

  • Player E says it needs formatted...

    Oh boy... where should I start.  I have a desktop computer "mutt" someone else built for me and don't know much details about it.  My basic problem is the following: the person has added a hard drive 40 gig (E) for additional storage.  Basically, I g

  • Update error 800b0100 code problem?

    Get the code above when you try to install the update on vista.

  • Strange

    I have Wireless N ultra model #WUSB600N. It works on vista 32 and works. However, the 2 problems I cannot solve and are incredibly frustrating. 1. when I turn on the computer with this model I have limited connectivity for 1-5 minutes and no internet

  • Problem with my workspace

    Unable to(1) see my right side panel that displays "layers", "glyphs", "shades", etc...(2) use my hand tool to move the work plan according to my needs. Plan of work is currently coming in the right part of the page and I can't seem to bring it into

  • Wo finde ich meine serialnummer

    Adobe photoshop elements 12 habe von meinem rechner Debby. beim wiederinstalieren fehlt mir die Serial nr. besitze aber die code-nr. Wie und wo kann ich die series-nr find? vielen dank, Dieter