Problem with IBM WebSphere installation on Windows Server

Similar Questions

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• problems with the final installation of windows 7

  I have a HP Compaq dc7700 Small Form Factor, which works on XP. Recently I decided to upgrade to Windows 7 Ultimate edition and started the installation but to halfway through the process, there was a blackout and restart, the computer boots from the installed windows 7 but because the installation is incomplete, the computer gives this message

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer, and then restart the installation.

  The problem is same when I try to boot from the disk or Flash DRIVE, the computer always boots from the hard drive and ends with the same error.  How can I restart the installation? I tried to boot with the Windows XP drive and another drive in Windows 7, but the problem persists

  Hello

  How do you change the boot order?

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And use the Start Menu button:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
    • 

  See you soon.

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Had a problem with the print spooler in Windows server 2012 R2 so cannot print

  service has stopped several times to meet the demands of service control: print spooler

  Contact the service provider or system administrator on whether to disable this service until the problem is identified. You may have to restart the computer in safe mode you can turn off the service.

  Event ID - 7046

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• installation of windows server 2012

  I recently purchased windows server 2012, however, it came with a disc only. No instructions, nothing? How can I install on my Acer Aspire easyStore H342?

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that needs clarification to install Windows Server 2012. I suggest you go through the followiong links.

  Installation of Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/jj134246

  Install and deploy Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/hh831620

  If you need assistance, I suggest you to ask your question in Windows Server 2012 TechNet Forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/hh534429

  I hope this helps!

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• FRM-92101: there was a failure when starting Server Forms... (R12 charge installation on windows server 2008 32-bit)

  Hello

  I encountered the following error when I try to open the form in oracle EBS R12.1.1

  It stuck for a little while and then appears an error message

  FRM-92101: there was a failure when starting Server Forms...

  (I've never been able to run the form on this)

  I ran a vision online forum that works very well which means java is ok.

  It is the new installation on windows server 2008 32-bit with costs of database (no vision).

  I search on the internet and tested all of the available options, including;

  change in the registry for example 1024,12288,1024 etc.

  marking the check box for oracle process manager to PROD "allow service to interact with desktop".

  check the configuration files of forms (all files of any bad path that I found and corrected)

  running files adautocfg.cmd for db and apps (returned errors and can be verified at the following link)

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20apps.log

  https://DL.dropboxusercontent.com/u/60474194/adconfig%20dB.log

  I'm not a technical professional and unable to solve the problem, please help

  Problem solved

• Installation of Windows Server 2003 on computers I7

  I would like to know if it is possible to install Windows 2003 Server on unit pre-assembled PC with a core I7 processor.

  The situation is that we have an old unit of PC which runs under Windows 2003 Server.Our company would like to upgrade the unit from the computer to a pre - assembled PC (mother of type server) to cut us out of the budget on the costs of equipment and install a license of windows server 2003.  But we are concerned that windows Server 2003 will be able to turn on a core I7.

  It is possible to install Windows 2003 server on a core I7, what are the steps that I require to set up correctly.

  Thank you.

  Hello

  As the question you posted is related to the installation of Windows Server 2003, I suggest you to post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Windows Server 2008 R2

  Installation of Windows Server 2008 R2 on a server without an operating system present.  Get an error 0 x 80070017.  What is the cause?  It is a new server.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.