problem with iTunes after the library to

Similar Questions

• Problems with aero after the latest updates

  Hello

  Someone had a problem with the latest Microsoft security updates
  touching the aero desktop theme.

  Since I downloaded the updates my aero as a theme stopped working.
  I did a roll windows back but I still have the same problems.

  The updates are #KB971029 and #KB971029 the
  updates have been downloaded on 03/17/11

  I hope someone can help with this problem.

  All the best

  Philip Davies

  Hello

  OK try to remove these updates to see if that helps. Sometimes manually
  install the updates one at a time will prevent topics such as this one (if the)
  mises_a_jour have been the question).

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Or

  The problems with the removal of updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  AFTER removal of updates, do a system restore to before
  updates have been applied to the origin. Therefore, affect the total amount of
  updates are deleted.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =======================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ======================================================

  If necessary try a repair Installation which allows to keep the programs and data however
  redundant backups are always a good idea.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• problems with wireless after the motherboard, cpu and ram upgrade adapters

  As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

  Hello

  When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• Problems with masks after the sequence first SpeedGrade back (CC)

  Hello

  I'm color ranking a clip in SpeedGrade CC using the new direct link function. For calibration of the colors I used masks and also the different layers. Once I'm done, I sent my sequence back to first Pro CC.

  I see, first shows me exactly the color correction, I did in SpeedGrade, except for one thing:
  The places where I used the masks in SpeedGrade to illuminate their for example a little until now are filled with lines pixeled...
  I thought it's just a problem with the preview, so I exported it. Slept pixeled lines.

  Once again: in SpeedGrade is all fine, but when I send the return sequence to the first there are those pixels.

  It's really irritating because one day before it worked fine with no problems and I was virtually the same as now.

  Please help me if you can! Thank you!

  Ok.

  The GPU acceleration is turned on?  Have you tried to turn it off?  You have a card AMD or nVidia?

• Still having problems with Itunes after music updated to iOS 9.3.2

  How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc

  What questions are you talking? Music of Apple, it's where you posted what you use? What music has been lost? It's all in your Apple's music. The rest should be in your iTunes library on your computer. I have almost 2K songs in my iTunes library and they have all been there since the very beginning, across all iOS and iTunes updates.

  What happens when you try to restore your phone to iTunes? What it the music has to do with whatever settings you have for music and once again, depends on your participation with music Apple or any other service.

  Try it please take a moment to build a question, describing what occurred, what device you use, what computer OS you use, and what troubleshooting steps you tried to correct. In addition, you use the services of Apple, and have you backed up your phone and your computer.

• Problem with Safari after the last update

  RE: Security update 2016-001

  Version of Safari 9.03 update

  Version of Yosemite 10.10.5

  Friday, I installed the latest update from security 2016-001. Since then, Safari is almost unusable.  Unable to connect to Pandora, unable to connect to my paying investment sites.  iTunes radio is very slow and almost no functioning.   Is anyone else having the same problem?

  I would appreciate help in resolving this issue.

  Thank you

  Phillip

  I was having the same problem and read a solution for this problem here: no internet after update of 2016-001

  If you have ESET cybersecurity or Pro is installed, uninstall and reinstall. Make sure that you have the newest version dmg before you start. The instructions in this thread, that I linked will not uninstall ESET. Uninstall using the uninstall tool. Shut down your computer. Restart and reinstall using the installation tool. It fixed for me. I had 2 days of the internet unusable for half of the sites I tried to visit. Even this site took 5 minutes to load. Either slow or no load on Safari and FF. Everything goes well today, although I've submitted a ticket with the people of Eset, they are working on a fix.

• Problems with Itunes after reformatting HD.

  I rebooted just Itunes on my computer with XP service pack 3. However, when I try to play songs that are recorded on the playlists in itunes, they sound distorted, but when I download and copy directly from a CD, they play very well. When trying to play songs stored on the internal hard drive or external, they sound as distorted. However, when I use the time drive Qucik, they play very well. They also play correctly when using the media player. ITunes, I added to my XP machines on a number of occasions, but this time is completely different. I will also add that this problem occurred after a complete reformat. I do not charge Itunes until all the drivers have been installed, and all XP updates have been completed.  But I reformatted before and never had this problem.

  What's really disturbing (as mentioned above) is that Itunes will play the CD in the drive and will be same copy of the reader. Those copied songs play without problem. But when I load in Itunes of my outdoor drves (external hard drive, flash drives), they will not play correctly. Its similar Itunes has trouble reading previously saved music files, what is the problem?

  first thing I always do, is ensure that I have the latest drivers on the manufacturers website. A lot of times are generic drivers windows just does not cut. Where are you now with the installation?
  B Eddie

• Problems with profile after the loss of power.

  During the recent snow storm, the power in the House flickered market several times and once it was over my wife has had some problems connecting on his profile. After a reboot, could she do to her profile without any problem. My profile was gone, none of the documents office, my antivirus doesn't work in my profile only, everything that I had linked with my profile disappeared. My system restore has been disabled so can't use it. Does anyone have any ideas on how to do to recover my profile and all my documents?

  On the assumption that your profile has become corrupt (not a rare event), the following articles should help you...

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• Problems with images after the subclips

  Hey there

  Today I woke up to see all subelements, I made my most recent project. Just today, footage looked more pixelated and blurry.

  What might of happened? When I stop the image the quality is exactly as it was before. But when played his more pixelated.

  Some of the images was shot at a lower resolution, but when I put the size of the screen to the appropriate resolution quality always looks bad.

  Would this have something to do with the manufacture of the subitems? Even go back and see the clips that came the subclips: the film is even more 'pixely '.

  Any help appreciated

  @

  Hi pavalanche11,

  Sorry for the problem. If it is fixed?

  Please consider these points for this problem:

  1. it looks in any case related to subitems.

  2 as you mentioned after a break the clips, they look very good, but not the same case playing; It could be linked to the resolution Pause and play in the monitor Panel.

  You can get these settings, either by clicking the exit button in the lower right of the monitor Panel or by right clicking on the items in the monitor Panel.

  3. you also said that you pulled these clips at a lower resolution. By changing the values in the resolution of reading as suggested above, they may work properly.

  Here is the text of pdf help Prelude:

  Some formats are difficult to display in full motion by reason of their high compression or broadband playback. A lower resolution playback faster but at the expense of the quality of the image. This compromise is particularly visible when you view the other H.264 and AVCHD-based codec of the media. Less than full resolution these formats have turned off error correction, and artifacts are common during playback. These artifacts, however, do not appear in the exported media.

  Use separate reading and resolutions of break to better control the monitoring experience. With images high resolution, resolution of the reading to a lower value (for example, 1/4) for smooth playback and the resolution of the break in full. These settings allow you to check the quality of the details of development or the edge when you stop playing. Cleaning put the monitor resolution of reading, stop no resolution.

  

  I hope it helps. Customer feedback is important to us. Continue to write in the case of any confusion.

  Thank you

  Mayjain

• The problem with SQL after the migration of the database to another machine

  Having a SQL strange problem trying to extract a database being moved from one machine to the other.  Both machines are running SQL 2008 32-bit and are both Windows 2008 servers.  When I try to backup the database using the SQL tools and restore the. BAK file on the new SQL Server, I get the following error:
  
  Restore failed for server 'servername' (Microsoft.SqlServer.Smo)
  Additional information:
  System.Data.SqlClient.SqlError: RESTORE detected an error on the page (44:2097184) in database 'RestoreDBName' read from the backup set.
  
  Similarly, when I am trying to copy the. MDF and. LDF files to the new server and tie them, I get the following error:
  
  Attach the database failed for the server 'servername '.
  Additional information:
  An exception occurred during the execution of a Transact-SQL statement or batch.
  A system assertion failed.  An assertion failure is usually caused by a corruption of data or software bug.  To check the database, consider running DBCC CHECKDB.  If you have agreed to send images to Microsoft during installation, a mini dump will be sent to Microsoft.  An update can be an available from Microsoft in the latest Service Pack or a QFE from Technical Support.
  Could not open new database 'NewDatabaseName' create a DATABASE is dropped.
  "" Location: "logmgr.cpp": 3277
  Expression: lfh-> lfh_startOffset is startOffset
  SPID:55
  PID: 292876 (Microsoft SQL Server, error: 3624)
  
  Everything I've read, these errors usually indicate some sort of database corruption.  However when I run DBCC CHECKDB on the database on the source server, it is up to perfectly don't own... None detected corruption.  In fact, this server hosts 8 different databases.  Departure from all the correct DB on the source server, none of them will restore however to a new server using one of the methods above.  I'm having a hard time to believe that each of them could be corrupted when they show absolutely no indication of a problem.
  
  Anyone have any ideas?

  Try to make the backup and restore via SQLCMD (or via a query in SQL Server MS window).

  The backup will be the following (obviously, change "MaBase" and "D:\BACKUPS" to some database and the location you wish to save - just using for example):

  BACKUP DATABASE MyDatabase

  TO DISK = 'D:\BACKUPS\MyDatabase.bak. '

  WITH NOFORMAT, NOINIT,.

  NAME = 'Database MyDatabase - Full Backup',

  NOREWIND, NOUNLOAD, STATS = 10, SKIP

  Copy your backup to the other server and file make:

  RESTORE the DATABASE to MyDatabase

  FROM DISK = 'E:\Backups\MyDatabase.bak' WITH FILE = 1,

  GO to "MyDatabase_Data" to "E:\SQLDATA\MyDatabase_Data.mdf,"

  GO to "MyDatabase_Log" to "E:\SQLLOG\MyDatabase_Data.ldf,"

  NOUNLOAD, STATS = 10 REPLACE

  Again, change your names and locations in function.

  If this does not work, try to restore a database by third-party tools. You can find them in Google. If you don't want to spend the time to research, you can try a tool SQL Server Recovery Toolbox. All the details about this program on the link. http://www.oemailrecovery.com/sql_repair.html

• Problem with HA after the upgrade to 6.0

  We had the private cloud based on vSphere 5.1. A few days ago, we went from vCenter Server 6.0. Now, I'm upgrading of ESXi hosts one I faced the problem. When I had to update a single host to 6.0 and tried to connect in the HA cluster I had an error. The reconfiguration process goes to 100% and fails with an error of operation time-out. I tried to reboot the host, to remove from the cluster, to uninstall the agent. No results. I can't understand.

  Now, I temporarily stopped the upgrade with the other guests to save the HA cluster.

  Any ideas how to fix?

  It seems that restarting HA agents on all the hosts (or reconfigure all the hosts for vSphere HA in client GUI) solves the problem.

• Problem with Youtube after the update of Flash Player (11.9.900.152)

  Since I've updated my FPlayer I have problem on Youtube videos...

  I have the version 11.9.900.152 - later, but I'm not able to watch videos at all. I installed a previous version, it worked in part, some videos played the others don't. Sets the last of them in again. First on the page to find the Version that I couldn't see anything and then after you have reinstalled several times, it finally shows that I have the latest version. I followed all the steps here http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html nothing works... no luck

  What should I do, its me piss off now not only Desktop, but my laptop has the same problem (I didn't know this update is causing this problem so yes I installed it on both - and I do not know what was my old vesion)

  same story (2nd paragraph) except the link, provided it works for me

  http://forums.Adobe.com/message/5847321#5847321

  I have IE/Mozilla/Opera

  Win XP Office

  Win 7 portable

  I did everything that you said, step by step. but still no luck

  When I opened that allows Flash Player in Internet Explorer

  the video still does not play, but when I open it in Youtube it plays without any problems

• HP ENVY 15: Problem with audio after the Windows 8.1 update

  Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

  Product number: E4N80EA #ABZ

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Apple support has been unable to solve my problem with iTunes not responding do not. He started all of a sudden. A few weeks after I've upgraded to Windows 10. Reinstalles/uninstalled iTunes and nothing. Now, I can't even Apple support for help.

  All the sudden, iTunes has stopped responding. I click top and nothing. I spent over an hour with a Senior Engineer at Apple's Support, which does not give me a ticket number so now Apple can't even find the person I talked to. This person had to remember and it's been 2 weeks. I called Apple back Support and since they can't find a ticket number they told me that I have to wait until this person reminds me. This engineer had me remove and reinstall iTunes with all the other components that go with it, I run it as administrator, pretty much did all the troubleshooting I had done on my own. I have now to sit and wait, hoping that this senior engineer at Apple called me back. It's poor and poor support for iTunes. If anyone has any advice, please share.

  Thank you

  These can be things that you've already tried. Despite this, it might be interesting to try again. As another poster has said recently, though for another problem, "20th try was the charm.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2