Problem with LAN adoption of Windows 7 Ultimate

I have laptop HP PROBOOK 445 G1 and I installed Window7 ultimate OS and network found problem.so please suggest how this will work fine.

Hello Ravi,

Thanks for posting your question on the forum of the Microsoft community.

I would like to know some information about the problem so that we can help you better.

1. you receive a code or a network adapter message?

2. have you installed latest drivers network on your computer?

It is possible that the network drivers are not installed on your computer.

To find if there is an error code in the network adapter properties, please follow this link.
Error codes in the Device Manager in Windows
http://support.Microsoft.com/kb/310123

I would suggest trying the following methods and check if it helps.

Method 1:
Run the network troubleshooting and check the issue.
See this link:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

If this does not help, then use method 2.

Method 2:
Please use the suggestions provided in this Microsoft support article and check.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

In addition, please download and install the latest network drivers from this link.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359422&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Additional information:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-GB/Windows/fix-network-adapter-problems#1TC=Windows-7

I hope this information helps.

Please let us know if you need more help.

Thank you

Tags: Windows

Similar Questions

  • Problem with remote control in Windows 7 Ultimate

    Hi guys,.

    I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

    the remote control has stopped working & I tried to look for a solution but no luck.

    Please can you help me with this problem

    Thank you.

    Published by looks on 02/11/2009 04:51

    Hi Jajomafa,

    My problem was resolved a few days ago.

    There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

    The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

    I suggest that you run the automatic update.

    I hope this helps.

    Kind regards.

  • Problems with sound after loading Windows 7 Ultimate

    I just loaded Windows 7 ultimate on my HP Pavilian m7100y.  I have no sound, the monitor is an HP vs19c and trendy top speakers.  Can someone please.

    Hello:

    See if this driver works...

    Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Problem with shortcut, opening of Windows 7 ultimate

    During the logon process, this view began to appear. I can cancel the notice and the process continues without any difficulty and does no work. Any advice?

    Check your startup folder in the Start Menu for a shortcut. Right click and look at the properties

    It is extremely likely that it is just a shortcut to an orphan and the ability to remove everything that is needed will be, but you should really confirm 1.

  • Problem with the installation of Windows XP on the Satellite A200-1RK

    Hello!
    I ve you have a problem with my laptop.
    I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
    Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
    Why?
    Can someone help me?

    Maybe I can use drivers from another laptop A200 series, but which?

    Hello
    a good explanation how to install XP on a SATA machine can be found here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

    Welcome and good luck

  • I have the ie3sh.exe problem on my laptop, can you tell me what I have to do and this causes a problem with LAN for internet

    I have the ie3sh.exe problem on my laptop, can you tell me what I need to do, and this causes a problem with LAN to the internet.  What happens on another laptop not this one.

    Hello

    ·        Which is exactly the problem that you face with iesh3.exe?

    ·        When you receive the error message that is related to iesh3.exe?

    ·        You did changes to the computer before the show?

    ·        This issue you are facing with internet?

    ·        What is the full error message that you receive?

    Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Method 2:  I would say as you put the computer to boot and check which application is causing the problem:

    http://support.Microsoft.com/kb/929135

    Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    Post back with the required information so that we can help you further.

  • problem with babylon runing on windows 8-storage initialization failed (error 10)

    problem with babylon runing on windows 8-storage initialization failed (error 10)

    Hi Shlomy,

    1. when exactly you get the error message?
    2. do you have an error message?
    3. are install you authentic version of Babylon?

    This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

    How to perform a clean boot in Windows
    http://support.Microsoft.com/kb/929135

    Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

    If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

    Post us the results after trying the steps above.

  • I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

    I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

    Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

  • I have a problem with photoshop cc in windows 10

    Hello

    I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

    I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

    Screenshot (30).pngScreenshot (31).png

    Screenshot (32).png



    I really hope that anyone kno w s, what the problem is and can help!

    Hi Editjo,

    Greetings!

    This seems to be a graphics card problem.

    Please disable the graphics processor in photoshop, and then try again.

    Open Photoshop

    Click on edit-> preferences-> Performance

    Uncheck use graphics processor

    Click OK

    Close Photoshop and re - open and then use the way you did that.

    Also, please share the exact version of your Photoshop.

    Concerning

    Jitendra

  • problem with photshop cc monitor windows 8.1 k and 4 to a resolution of 3840 x 2160

    can anyone help

    I have a problem with photshop cc on windows 8.1 and 4 k display to a resolution of 3840 x 2160 when I launch photoshop cc, everything is very small and I don't know how to get the program to the right size

    Install Photoshop CC 2014 and turn on the preference of the user interface scaled by 200%.

  • Problem with the upgrade to Windows 7 Professional to Windows 7 Ultimate

    Hello

    My Dell laptop came pre-installed with Windows 7 Ultimate 64 - bit version. But there was a hardware problem, and I had to re - reinstall Windows 7 on my Dell laptop. But then, without knowing it, I installed Windows 7 Professional 64-bit (for which I had the key too) & began to work on it. Later, when some drivers were not installed correctly because of compatibility issues, I realized the truth.

    Then I tried to update my Windows 7 Professional current operating system to Windows 7 Ultimate-operating system by using Windows Anytime Upgrade without having to re - install Windows from scratch, I have so many applications and data on my laptop now. And I used the key of Windows 7 Ultimate version I have with my Dell laptop. But the key is not be accepted by the Windows Anytime Upgrade application and the following error message is displayed:

    "Enter a different upgrade key

    The upgrade key you have entered is an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. "

    Please help me in this regard to solve this problem so that I can improve my Windows 7 operating system without having to re - install from scratch.

    Thank you

    Romaric

    Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

    Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and system integrators or keys, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) / DreamSpark or pedagogical keys that does not / do support the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

    The key that came with your mobile PC is an OEM key, which most likely why it fails to upgrade.

    J W Stuart: http://www.pagestart.com

  • Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

    I experienced some problems with the onboard Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works very well: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices connected and the link has any problems.

    But, in some cases, with multiple Eth, the adapter devices involved the link at all, the Green LED on the right (link?) continually flashes with a delay of 2 seconds (0.5 "-1.5" wide) and the yellow on the left (traffic?) is always idle. On the other side of the Cat5e cable, the unit (now a Linksys WAG325N router) sign no link. There is NO cable problem.

    Windows (XP Pro, SP2) sometimes reports in the small icon of the LAN adapter on the traybar a driver connection established at different speeds (often 100 Mbit/s, but sometimes 1000Mbps!), but soon he returned to status "cable disconnected".

    I tried to upgrade the drivers directly from the pages of Support Intel because the support of Toshiba does not recognize my laptop (!), and because originally I did a downgrade to XP (I'm sorry, but I don't want to use the original MS Vista!), but nothing changes.

    The only way to establish a connection that I found is to manually reduce the speed (10 Mbps - full duplex) of XP driver advanced settings link. In this case, everything works, but a low speed.

    Can someone help me? Someone already noticed this problem?
    Thank you!
    Paolo

    Hello

    I m not very good if it isn't a cable delivers.
    Have you tried to connect the two devices using a crossover cable (cross cable)

    There are three different types of crosscable:
    -100BASE-TX-Ethernet 10BASE-T-und
    -100BASE-T4-Ethernet
    -Ethernet 1000BASE-T

    The difference is the use of pairs of crossed wires.

    However, the use of crossed cables is not necessary if you connect a router or switch device.
    But in case you want to connect two laptops, the crossover cable is required.

  • Scanner driver problem with - 8.1 to Windows and HP L7680 AIO

    Hey folk,

    I have a problem with my HP L7680 AIO.

    I did an upgrade to 8.1 Windows x 64

    I have install the driver real 14.8.0 version.

    The printer works but the scanner hurts.

    When I begin a scan I get an error message and the scanning process is cancelled.

    I have this error message with photoshop, HP solutions and any other scanner software.

    Printing HP and doctor Scan says I have to contact support.

    Here I am all idea?

    Either way, I disabled my Antivirus software during installation.

    Thank you very much.

    Greetings

    Markus

    Hello

    I solved the problem by myself.

    For people who have the same problems...

    It was the prevention of intrusions by more Portscanner antivirus.

    I could adopt new the situation with other systems, and this is the reason why I say that it was definitely the Portscanner.

    The fool is the AV-Suite of disabling showed no effect.

    Only after that I put the settings in the AV suite that IPS should not control the ports everthing works fine.

    Things difficult, but now it works...

    See you soon

    Markus

  • With the help of Windows 7 Ultimate with traditional programs Chinese

    Currently I am on Windows Pro 2000 traditional Chinese version (Taiwan) that I bought and brought back to the States with me. With programs more and more does not support this version of Windows, I'm looking to upgrade my OS. My problem is not so much to be able to read and write Chinese characters, I know I can (I have a LT with Vista Home Prem, who can do the same), but rather whether or not I can install my Chinese traditional programs on this computer and run. On my laptop, Vista will not work their due to the fact all the menus on the toolbar or place dialog boxes are able to output Chinese characters. Under Windows 7 Ultimate will solve this problem or should I wait and get a copy of Windows 7 in traditional Chinese (localized version)? Writing Chinese on my laptop with Vista is terrible compared to the use of the localized version of the traditional Chinese. Thanks for your comments.

    Check this link, could put some light on the question:
    http://www.pinyinjoe.com/Windows-7/Win7-Chinese-intro.htm

    All the best!

  • Problem with the real product window

    My laptop is Hp Pavilion dm4 with Windows 7 Professional, bought about 2 years ago. But a technician installed Windows 7 Ultimate, when I went to reinstall after a problem. Now tells me my windows is not genuine, while I stuck on my laptop product genuine key. How to solve this?

    Hello

    You must reinstall Windows edition that is located on the COA sticker.

    If it came with preinstalled Pro, you can not install Ultimate unless you purchase a product key.

    Reinstall windows 7 Pro.

    See you soon.

Maybe you are looking for