Problem with LED and the comparison.

Hi everyone, I have trouble with this application, so I hope that someone could give me some advice. Im going to explain as best I can...

So in this VI, I have 4 signals that I need to compare them, I need the smallest and largest value, so I used a restructuring of business to do. I do 2 groups to be compared, and then the result of each one of them receives another comparison to get the values that I want. My problem is, for the largest value of all the 4, I need an LED to indicate what is most great, and something I have is in my attachment. I take my first group two and put 2 LEDs, so when the comparison occurs, you turn and the other goes OUT, (which indicates that one is the largest and the other is the smallest), and again the same thing in the other. But as you can see, when running I have two LEDs indicating, in every comparison, which is great, but I need a LED lights up when this value is present. and the other three offshore. I know that work in this way, the result I m going to get, but I can understand how to continue with the result of this step, I need.

As far as I know, there is no way to compare more than 2 signals at the same time, so I tried to merge the signals, but this didn t help me at all (maybe is something that I do not understand how to merge works, so if anyone has an example on how to do things, i´ll check).

All data are dynamic, a NI 9237, but since its a laboratory, I can't get a lot of time trying different solutions, so I did a test TDMS file and change the DAQ Assistant for a reading of file of the measure, but the rest is the same.

Use 'antenna bundle' to build a picture of your values of 4 controls. Return the index of the max and min elements, use 'table max and min. From there on, it should be a wink to indicate the corresponding settings.

Tags: NI Software

Similar Questions

  • problem with Safari and the opening of sites

    problem with Safari and the opening of sites

    Please describe the problem in more detail?

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • Want to Phoenix 860-010: problem with fonts and the noisy fan

    I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

    Hello @PhotoGene47,

    Thanks for the quick response!

    Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.

    I hope this helps.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Kind regards!

  • Problems with fonts and the Fontcache.

    Recently, I noticed that a Svchost was running constantly at high CPU usage, as well as a few programs had stopped working on my PC. After doing some poking around, I believe the problem to be with Fontcache and my fonts. It turns out that my partner has installed a large number of fonts, which I suspect to be corrupted. Unfortunately, I can't open the fonts folder, or the section fonts in Control Panel.

    In an attempt to put an end to the use of the processor (which I think is of Fontcache constantly trying to start upward - and otherwise), I have disabled loading in services, however it still loads up when I try to start a program like InDesign. InDesign will also not load, I suspect that for the same reason.
    I could not remove all the fonts, or find no way to remove them, without access to the section fonts in Control Panel. I tried to access via a command prompt and just can't take the ownershop/control of them to remove them. All of the guides I found on the internet forced me to open the folder of fonts/Control Panel and manually change the permissions using the Windows user interface, but obviously I can't do that.
    Does anyone have a solution to remove fonts or an another workaround for the problem?
    Thank you
    ~ Fishy

    Hey shady,

    Thank you for reaching out to the Microsoft Community.

    According to the description, it seems that you are unable to remove the control panel fonts.

    To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

    1. what happens when you try to access the control panel?

    2. do you get any error code or error message?

    I will certainly help you with this issue.   Here are some methods that you can try in order to solve the problem.

    Method 1:

    I suggest you run the troubleshooter of performance on the system and verify.

    Open the troubleshooter of Performance

    Method 2: Remove the fonts in safe mode.

    For more information on fonts, check out the links.

    Install or remove fonts

    Fonts: Frequently asked questions

    If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

  • Problem with FWSM and the same L3 interface switch

    I have two 6513 s with a 802. 1 q trunk linking them. Each switch is redundant Sup720s running in native mode, worm IOS 12.2 (18) SXF (that they were running out of SXD3). A FWSM (ver 2.3 (3), routed mode, unique context) is in each switch, Setup in failover mode.

    I can't get a PC in a virtual LAN that has the defined layer 3 interface on the switch with the active FWSM in this document, to communicate with the devices 'behind' the FWSM. If I move the configuration of layer 3 to this vlan to the other 6513, everything works fine.

    The MSFCs are inside the firewall, they have a configured layer 3 interface in the same vlan as the FWSM 'inside' interface. Several "same security level" interfaces are defined on the FWSM and used to protect the farms. I use OSPF on the MSFCs and FWSM and the routing table is correct.

    The FWSM generates connections to the attempts made by the PC with interface layer 3 defined on the same switch as the active FWSM very well, so this isn't a problem with FWSM ACL.

    A ping of the FWSM "inside" interface from a PC with the defined layer 3 interface on the same switch as the active FWSM fails, although debug icmp trace on the FWSM demand and response shows. A the packet capture, using the NAM-2, only shows the request packets. I captured on the vlan common and FWSM port channel interface bottom of basket.

    Just to add to the confusion, if I capture in the same places, but do the ping of a PC which is in a VLAN with the interface of layer 3 defined in the 6513 which does not contain the active FWSM, that works very well, I see the request and response on the capture of vlan common, but only on demand on the capture of the port channel.

    This problem has been there since the beginning of this implementation and has not changed with IOS and FWSM software upgrades. I had this experience with all the VLANS that I tried to define the interface of layer 3 to on the switch with the active FWSM. I turned on MLS.

    If anyone has experienced this and solved, or knows what is happening, I would be grateful for any ideas.

    Thank you.


    Keith, are you running etherchannel distributed on of your 6513?

  • Weird problem with forms and the definition of multiply

    Hi all

    I'm having a problem with the forms drawn with the pen tool and this weird border (no stroke). It appears when the transparency settings are changed (multiply, overlay, etc...). I've updated AI CC and restarted the program with no fix. The only known cure is to add a line to the object. Any help is appreciated! Thank you

    Screen Shot 2016-03-20 at 9.00.56 PM.png

    Have you tried to switch between GPU and CPU preview?

    Ctrl Cmd E E (Mac) (Win)?

  • Problem with DRM and the integration of the EBS


    We are experiencing a problem and EBS integration are finished but the results do not appear.

    Please can someone help.

    Thank you.

    Please check the below id doc from Oracle.

    Concurrent workload with DRM to the EBS GL integration completed with errors (Doc ID 1643092.1).

    Thank you

    ~ KKT ~.

  • ESXi5 - problems with NFS and the data copy store

    Hello world

    I recently moved into a solution fully virtualized for my network, 3 x 5 ESXi servers running on our GigE network.

    First of all, I use all free software from VMware, so vCentre etc is out of the question.

    I have major problems when you try to copy files between:

    • NAS (NFS) to ESXi 5 host
    • ESXi host to the NAS (NFS) 5
    • And using VMware converter between ESXi 5 hosts converter Standalone

    The problem is that whenever I'm transfer between hosts I am struck with the horrible network performance. Even if I use GigE adapters and switches between my hosts I will receive no more than 12 Mbps speed of transfer real (100 Mbit/s connect?).

    On the flipside, if I use virtual guests on the same exact host I can happily transfer data between my NAS (NFS) servers with speeds between 60-150MBps ~ (1000 Mbps).


    Speed of 10 Mbps of transfer of ESXi_1 copy OF NFS data store share ~

    Server2008 (comments, located on ESXi_1) copy OF NFS 75MBps transfer rate ~.

    Server2011 SBS (comments, located on ESXi_2) copy OF Windows share 2008 (ESXi_1) transfer speed 120MBps. ~

    ESXi_2 copy OF NFS data store share transfer rate 5MBps ~.

    Attached (wtf.png) example:

    I copy a file that is located on our NFS share first, it's a 3 GB file to the copy within guest OS (2008), it is indicated in blue - top speed of 80MBps

    I copy the same exact NFS share for the host (datastore1), this is indicated in red - top speed of 7.5Mbps

    The third transfer/s (green) is between the customers of windows on different hosts, transfer a 6 GB file as well as a copy of the 360 MB file - transfers two happily send to GigE speeds with a peak around 40MBps

    I can reflect these results across the three servers without modification. Copies between you will be able to run well enough (not exactly 100% use of GigE) but at the moment where I try to do something to the data store it will just choke at all about a 100 Mbps connection speed.

    The final image (wot.png) confuses me beyond belief. I would try to explain what is happening here:

    • This image shows two times the same exact file transfers, except even machine PHYSICS
    • The first (red) transfer between the ESXi_2 host server and the NFS share using the browser data store and direct download - its top speed is around 8MBps
    • The second (green) transfer between a guest server 2008 running on ESXi_2, download the same file exactly at the exact location using vSphere Client. I mean the same EXACT file; It connects to the NFS drive by the data store ESXi_2 (NFS share).

    Why on earth can my comments directly download a file on a data store connected to NFS GigE clocked and yet the same exact host cannot go anywhere near corresponding to these speeds?

    As indicated in the title, the problem seems to happen whenever I use ESXi datastore browser on the host computer using vSphere Client or between browser datastore ESXi to/from an NFS share.

    No one knows what might happen?

    Is there some sort of restriction on the transfer of files between a host and shared NFS ESXi 5? Whence this bottleneck?

    Thanks in advance for all the help/ideas that guys can throw my way.

    P.S. Sorry for the wall of text, I really wanted to give as much information. as possible.

    What type of storage you have locally on the host computer?

    I have seen this problem with write-through controllers:

  • Problem with rendering and the display of a component Declarativ

    Hi all

    I'm doing the tutorial from this link
    Like here, I make my component, first deploy and import and everything works fine, then I delete all references to this component, and then I change my component with a few new employees as a description of some field and etc, but I have nothing to do with the functionality of this component. After that, I deployed this component and do the same thing as first import of the component. Now when I drag and drop component that I see only tags <>name of the component, I can spend parametars component and when I run the project I see, but in developer mode, I see tags and name. : S also, import method component cant do as in tutorial, now I have to go to another property of the project and import the jar file.

    May be the problem: I'm doing my own skin his spans fusionFx-v2, I use for component declarative juice fusionFx-v2, declarative elements I have icons and as parametars 6 methods reciving javax.faces.event.ActionEvent I

    One had same problem with declarativ components?

    Thank you for your time!


    -Make sure that you have deployed the component as a library ADF
    -to reinstall the component uninstall first (select library in the resources catalog and select the remove from project option)
    -Add the new component
    -You may need to restart the IDE for the file in some earlier versions of JDeveloper JAR must be replaced by the new

    You do not give a Jeveloper version with your question, so that's all I can say for you.


  • Problem with SEO and the field temporal businesscatalyst

    Hi everyone¡¡¡I´m of problems with a Web SEO site, which is indexed by google fist in area regular businesscatalyst by the direct field temporal. I would know, it would be possible to remove the Web site from time businesscatalyst in the catalyst business Panel? How? ¿ ? , I find the option redirect.

    I m afraid on the posibility, google plans to my website online text repited for this reason.

    Thank you everyone¡¡¡

    Go to the domain manager in the admin.

    Click on the URL of development ( and there you will see a tick box stating to redirect to your homepage. Check and save.

  • Problem with certificate and the exception is not available

    So, here is my problem I am trying to connect to a secure server. When I do this, I get to a page telling me the browser appears not that the server is secure and that the certificate is old.

    When I click on the button "Add an exception" a small window opens saying the certificate is new safe and I can't add an exception.

    The exeption box is grey so I can't click in and the button 'Add exception' is olso gray so I can't click on it. I click on the button "Cancel" and return to the page telling me the server is not sure.

    How can I go about solving this problem?

    Check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.

    Find out why the site is not approved, then click on "Technical Details to expand this section.
    If the certificate is not reliable because no issuer channel was provided (sec_error_unknown_issuer) and then see if you can install the intermediate certificate from another source.

    You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

    • Click on the link at the bottom of the error page: "I understand the risks".

    Let Firefox recover the certificate: "Add Exception"-> "get certificate".

    • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the issuer of the certificate.

    You can see more details like the intermediate certificates that are used in the details pane.

    If "I understand the risks" is missing, this page can be opened in a (i) frame and in this case, try the shortcut menu and use "Frame this: Open image in New Tab".

    Note that some firewall monitors connections (sure) and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the certificate of the Web site.

  • connection printer MG7520 problems with password, and the new name of the router

    I had to change my router network name and the password (the actual router is the same, but the network name and password is different). Now my Canon MG7520 won't 'talk' to my lap top, room rvia wired or wireless LAN (that worked before). My guess is that I need to "tell" the printer name and the password are different, but I know dn't how.  I tried to download the software and run it (that is to say, all over again) but when I do I get an "unable to acquire information on the driver and software.

    Any suggestions?

    Hi sdwhite,

    Yo are quite right that any time changes to network configuration, the printer must be given new items.  The printer can be connected directly from the operations Panel, and I have included full instructions HERE.

    It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

    This has answered your question? Please click on the button accept as Solution so that others may find the answer as well.

  • Problem with swf and the sound

    Hi all!
    I created a flash animation that includes a sound effect (mp3). The animation works well and the sound plays as expected. But at the end of the animation, the sound is played again. I check my swf file, but sometimes a preview flash. If anyone has experienced this?

    Thank you!!!

    Not sure, but you could try adding a script framework at the end of your animation with this code:

    this.stopAllSounds ();

    This line should stop all sounds playing on this timeline, without affecting the Captivate. I can't guarantee that, but it's worth a try. Now, if your animation focuses on AS3, then the above will not work. After return to it is and I'll write the code for you, or do a search (it is not a single line/method).


  • View the problem with PDFs and the pen


    I have a new Pro and that you have not installed an important apps or new software.  I can use the stylus to write on a PDF using PDF viewing software provided, and that works a treat.
    I can even e-mail the PDF file with the ratings on which can be seen by the recipient too.  Great stuff, really very useful.
    BUT if I then open the PDF saved again on the surface, I get a load of rubbish where writing should be.  Random blocks of graphics.
    I restarted the surface and closed the PDF and opened it again, with the same result.
    I had downloaded the PDf noted to a Web site also, so I deleted the cache using disk cleanup, and who did not make a difference
    I have the PDF file and a screenshot of what I see on the surface, which I can download also.  But the PDF has confidential information, so I need be sure, that it would not be played on a public forum.
    The list of topics below is not really a relevant drop-down be...
    Thank you

    A recent MS update hassolved the problem that I see...

  • Problems with playback and the recording of the sessions

    Hi, covered!

    I met two annoying problems:

    (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

    (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

    All of the pieces of advice?

    Potapka wrote:

    (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

    Hmm... go to Preferences > multitrack and reset the stereo panning mode to l/r cut logarithmic and no - 3dB Center. This will not happen then.

    (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

    Yes, it's boring. If you are absolutely sure that they are not modified, then remove additional ones. You can take a look at Mediasweeper too.

    Hi, covered!

    All of the pieces of advice?

    Please use English spelling normal - this way, I don't feel as if I want to run...

Maybe you are looking for