Problem with Lightroom and external hard drive. Files and folders deleted.

Similar Questions

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

  Hello

  Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
  drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
  at 4 GB.

  Overview of FAT, HPFS, and NTFS file systems
  http://support.Microsoft.com/kb/100108

  How to go beyond the limit of 4 GB on FAT32
  http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

  -------------------------------------------------------------------------------------------------------------------------

  The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

  Zip and Split - free
  http://zipandsplit.toolazy.me.UK/

  Split and Zip - free
  http://www.jtoolgame.com/tools/splitzip.html

  Akhir Split Zip - free
  http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• External hard drive does not work. Is there another way I could solve the problem without formatting the external hard drive?

  My external hard drive works. I tried to plug and when I tried to open it, it says to format the drive until I could use it. Everything works well as when I plugged the USB icon shown on the screen. When I check the disk management, it showed that the partition of the drive is there.

  I tried to change the drive letters, but still having the same problem. I also tried to run the disk check on the command prompt and the properties of the drive, but it still can not because there is error popping up saying that the disk check cannot be performed because Windows cannot access the disk.

  Is there another way I could solve the problem without formatting the external hard drive?

  I tried the first step in troubleshooting the hard drive, but it gives a
  error in saying that "hardware changes might not have been detected.

  So I tried the second method, and when I click on the "Check now" button his
  gives an error saying that "the disk check cannot be performed because .
  Windows can not access the disk".".

  So is there any other way or option?

  Thank you

  Jason

• How can I move music and photos from my MacBook on an external hard drive, files without deleting the existing NTFS files stored on it?

  Hello.

  I am aware that this issue (or different versions of it) will be requested a thousand times before, but after searching on the internet for a solution, I have been unable to find all the information that brings a simple clear answer that is specific to my problem and so thought I would ask the question myself.

  I recently bought a Toshiba 1 TB external hard drive to transfer music, photo files and internal document in front of the memory of my old PC running Windows, as well as files, music and photos from my existing MacBook Pro, so I can "release" the memory on the latter.

  Transfer files from the old PC proved to be easy; success achieved by simple drag / drop the files to the appropriate location on the external HD icon of Toshiba which appears once I connected to a USB port. It is perhaps worth mentioning that the area of States hard drive has been formatted NTFS for Windows, and so I guess that I would not have expected any problems when transferred to a PC.

  Move the files from my MacBook has however proved anything but simple and trying to drag the respective music and photo files and drop them on the HD Toshiba icon (which appears on my desktop once it is plugged), I seem to be affected by the same issues as so much seems to have it before me, in that "forbidden access" / error symbol appears with the cursor , and bounce the files to their original location whenever I try to place them on the Toshiba HD.

  I understand that this is due to the HD is formatted in NTFS, and that I would need to reformat the hard drive to move files from my MacBook, which brings me to my questions:-

  (a) how do I do this, and

  (b) can I do this without losing, damage or remove the NTFS files from my old PC, which are already stored on the external hard drive.

  If one is able to offer any assistance, in the most simple, easy to follow the description, I would be really grateful!

  Never been so thanks in advance!

  1 install software such as Paragon NTFS on the Mac and let the reader in its current form or from the Finder, choose utilities go to menu, open disk utility and reformat.

  2. that by putting a copy on another drive. You should do this anyway, in case of failure of this drive.

  (141070)

• Moving files from lightroom on external hard drive

  I read a few post on this topic, but I have not found the answers I'm looking for.

  I want to take all the pictures on my computer and put them on an external hard drive.  If I'm in lightroom and connect my external hard drive, if I just move all files to a disc external hard takes them out of my computer?

  In addition, I want to do is make a folder for each calendar year and the changes made to the photos.  So, if I save my project and move it over the pictures, this means that any changes I made on these photos will stay with these photos?

  To have all my pictures on the computer, if I wanted to reopen a file from my external hard drive through lightroom, they automatically opens with all the changes always made for them?

  TamLee333 wrote:

  I read a few post on this topic, but I have not found the answers I'm looking for.

  I want to take all the pictures on my computer and put them on an external hard drive.  If I'm in lightroom and connect my external hard drive, if I just move all files to a disc external hard takes them out of my computer?

  In addition, I want to do is make a folder for each calendar year and the changes made to the photos.  So, if I save my project and move it over the pictures, this means that any changes I made on these photos will stay with these photos?

  To have all my pictures on the computer, if I wanted to reopen a file from my external hard drive through lightroom, they automatically opens with all the changes always made for them?

  Point 1: Yes, Lightroom will move from your computer to the outside. However, I would not recommend doing so, I copy the files from the computer to the external help for your operating system and when you checked the copy is ok and you've "updated the location of the folder" in Lightroom and then you can delete the folders on your computer.

  Point 2: You can do manually in Lightroom using the sort options to reach the older that you want or craete a new catalog and import your current and the importing stage move files to folders by date order.

  Point 3: Yes, it will be, but you won't be able to 'work' the files that are on the drive offline, unless you have generated clever insights.

• External hard drive file names are hidden in Vista

  I have an external hard drive that I use to view files on several computers on my laptop that is running Windows Vista, the files are displayed in the icon view but with no file name. If I switch to list view, details or tile names appear simply not in one of the icon views. This happens only on my laptop and on this external hard drive.

  How can I get the names of files to be displayed in the icon views?

  Scott Harlow

  Hello

  1. don't you make changes on the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: If it helps, try the steps and check them off below.

  a. open the external hard drive and right-click on the empty space and select Customize this folder on the Customize tab select images and videos from the use of this file as a template.
  b. right-click on an empty area of the window and click Show, and then click Hide file names to uncheck.

  NOTE: If it is gray to hide file names, so make sure you have either very large icons, large icons, icons or small icons dotted first instead of the list, details, or tiles. (See right screenshot below)

  c. the names of files and folders should now be back.
  d. If you have changed the model folder in step 2, then change to the model file you want or had before.

  

  

• IO error 0x8007045D with Western Digital External Hard Drive in Windows 7

  I have a Western Digital 1 TB external hard drive, and I am currently running Windows 7.  When I try to move files on the hard drive I get the error 0x8007045D i/o and it won't let me move or copy the file.  What can I do to fix this?

  Error 0x8007045d is "ERROR_IO_DEVICE" - "the request could not be performed because of an i/o device error."

  Check the behavior in a clean boot, or insafe mode.  If it persists, you will have a problem with the external hard drive.

• Question about external hard drive file systems

  Some of my external hard drives use NTFS, other system FAT 32.  I use them mainly for the storage of RAW images, and they must be able to Exchange files between them, and with my computer using Photoshop 5 and Windows 7.  Should I wait for problems between these two file systems?  Or can it be just ignored?

  NTFS is better than FAT32. In addition to the benefits of using NTFS as mentioned by BearPup, the files will be safe as well as FAT32 NTFS. In addition, FAT32 has a maximum file (one file) to 4 GB size restriction. In addition, the file cannot be stored. For NTFS, it is more than 20 GB. The NTFS file system accident rate is very low compared to FAT32 format.

• Mini Mac server - attachment of external hard drives file transfer speed

  Hi guys!

  I wanted to increase the speed and storage capacity to transfer to my Mac mini file, so I bought a box of external hard drives. The one I bought is: http://www.icydock.com/goods.php?id=219

  Built-in the Mac mini hard drives transfer the file to 60 MB/s (writing and reading) and I wanted to get better speed of file transfer, so I bought an SSD that is going to be inside with an another HARD drive of 3 TB for archiving my files. The housing is connected by USB3.0 (5 Gb/s) for the Mac mini.

  [SSD-> files I opened every day] - speed around 550 MB/s write and 500 MB/sec in reading

  [HDD-> Archives, files that I have does not open very often] - speed around 150 MB/s write and 150 MB/sec in reading

  So I did some benchmarks on my new Setup, and the speed is not really what I expected. Transfer of file max speed I have achieved is about 100 MB/sec in writing on the external SSD plugged into the mac mini. This transfer has been filed since an iMac 21 "2011 with an SSD (with almost the same speed read/write than the box) so it's quite disappointing.

  It is possible that the Mac has a 'file transfer speed limit' is somewhere? Or whatever else that could affect that?

  More information on my setup:

  Mac Mini server 2012 - 2 TB RAID 1 - Mac OSX 10.9.5

  iMac 21 "2011 - Crucial SSD 275 Gb - Mac OSX 10.9.4

  IcyDock external enclosure - 4 bays, USB3 5 Gb/s

  -Red WD HDD 3To

  -Crucial SSD 1 TB

  Together internal Gigabit Ethernet network

  Thank you!

  Was perhaps Spotlight indexing external at the same time, the test has been done?

• External hard drives - file transfer

  I have two external hard drives and I want to move the files from one to the other.   I want to create a new folder on the drive more so I can copy the files in this folder.  I have to be able to create this folder...  How to do this, then once done, how to copy files...

  -What is the format of the disks? PC players are usually formatted with NTFS that a Mac CAN read natively, but CAN NOT write to. Thus, yu cannot copy any files or folder natively on disks formatted in NTFS.

  -You can write to disk formatted in NTFS with an application like:

  Tuxera NTFS for Mac

  Paragon NTFS for Mac® 14

  -If you can write on a disc yo can just go to the Finder and select the drive and right click and select new folder. You can select the files to copy to copy and then right-click and select copy, then go to where you want and right click and select Paste.

  You can also select the and drag them to the desired location.

• How to convert wma to mp3 on external hard drive file

  I have a new version of osxe1 mac 10.11.2 capitan how to convert wma files into mp3 files that are on my external hard drive so my mac can copy on my iTunes

  http://www.mediahuman.com/audio-converter/ - free.  Says it does WMA. I have not used it so try at your own risk...

  Switch (free basic version) - http://www.nch.com.au/switch/index.html - I don't know if this will make WMA

  All2Mp3 - http://download.cnet.com/All2MP3/3000-2140_4-190407.html - limited success with WMA

  Flip4mac - need version payware intermediary that allows you to convert.  Use with Quicktime player.  Flip4Mac - http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv - the free version will allow QuickTime play, but not to convert Windows Media files.

  After installation, a new component of Flip4Mac will appear in system preferences.  Make sure that you set the boxes to make sure that it will play WMV files in Quicktime format.

  VLC - not really a converter but will do a bit on the menu export.  Can be slow to be converted and there will be a learning curve.

  Explore online converters when you download a file in a format and download in another.

  I do not know if your computer can run Audion 3 I think I used to use it to convert WMA.

• PS3 not playing is not on WMP 11, the external hard drive files

  My PS3 reads all the video files from my WMP on my PC with Vista. All my external hard drive (G:\) .avi files appear in my library and are playable in WMP but do not appear on my PS3.
  I thought at least some of my setting are correct (for example network settings) for my PC to play files, but is possible to grant access through WMP to play the video files on my external hard drive?

  Hello

  I suggest you to consult the steps from the link below and check if it helps.

  Getting started with media streaming: http://windows.microsoft.com/en-us/windows7/Getting-started-with-media-streaming

  Change settings for streaming media in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Change-settings-for-streaming-media-in-Windows-Media-Player

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-us/windows7/Stream-your-media-to-devices-and-computers-using-Windows-Media-Player

  (For Windows Vista)

  Hope this information is useful.

• Problem computer backup on external hard drive

  I save all my photos on an external hard drive and decided to back up my computer on the same drive, but he continues to stop at around 12%.  The message I got was: "Windows Backup skipped backup system image because one of the critical volumes is not having enough free space.  Free up space by deleting unnecessary files and try again. »

  My computer C drive is currently using 141 GB of space.  My external hard drive TB free 2.29 a.  I don't know what or why he wants me to delete.  Help?

  Hello

  To identify the problem, try emptying the trash from the PC and the external hard drive. In addition, check the type of files you want to back up. Make sure that the file format is supported by your external hard drive. It would be better to list the model of your external hard drive to your answer.

  We will wait for her.

  Kind regards.

• can I use my Hp Pavilion DV7 cl 2273 with only an external hard drive?

  HP Pavilion DV7 - 2273cl

  No operating system installed

  No hard drive located

  Bought used

  Here's what's happening this laptop, I bought the other day who has no internal hard drive. How can I boot my laptop without a hard drive? Do I need an internal hard drive using my laptop, or could I just use an external hard drive? I don't think I can get on my hard drive they screw appeared to be hitting something I can get loose but not outside.

  AY info would be great thank you

  Extremely difficult to boot Windows XP from a disk usb external hard and will be extremely slow to use. Instructions to link here , but it seems to be down at the moment.

  Impossible for Vista or Windows 7 that I know.

  Screws for the cover of the hard drive come all the way, they stay with the cover, after loosening them that coverage will pop out.

  .