Problem with line graph

Similar Questions

• Problems with line spacing - not able to adapt

  Having some problems with line spacing - I work in a file that I've not been created.  The phenomenon that occurs is as follows: I have a block of text, when I increase or decrease the foreground one point at a time, nothing happens. As I continue to increase, the line of text will suddenly blow up about a quarter of an inch.

  For example, I 8.5pt type whose main value to auto (10.2) - I hit increases by increments of 1 point, the line does not, only when I get to 13pt we must answer and bumps up to about 1/4 in. I continue to increase by increments of 1 point 13, and line does not respond until I reach 25pt, how the line of bumps down on another 1/4 of an inch.

  This could be the cause?

  It's not downtown... The text is printed to line up on the starting grid.

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• FDK: Problem with line breaks / carriage returns

  Hello

  
  I met a strange problem with strings when you use the FrameMaker API. We have a FAPI customer who translated documents FM reading in their content, by replacing their text by the new translated text and in return the change in writing.

  However, I found that some strings are starting with a \r (carriage return) character, when we read in and when we write their return, they begin with \r\n, which moves text to the bottom line, and can break things as references etc. I don't know exactly why this is happening, we are using Visual C++ and we do a lot of conversions between classes CString and StringT types so maybe this conversion process are to do.

  To be honest, I find the appearance of newlines and carriage returns in the frame channels somewhat odd frame API breaks up the text of a paragraph into fragments for you anyway, so I would have thought that the use of these characters is redundant. That's a big assumption however so correct me if I'm wrong.

  We have implemented a work around by which our program strips newlines off channels before writing their return

  but in reality, what we really need to undress returns to the main line of strings, before starts the printable text in a string.

  I wonder what others have to say about this WRT its security approach. Any advice would be appreciated, thanks

  Eric

  Eric,

  I did a little greater experimentation, based on my previous comments (sorry, should have done that before I clicked on the Post before.)  When I programmatically add a \r one paragraph, I don't see no effect in page layout. This is consistent with my suspicions so far. I really think that, maybe, these characters are misleading and should be removed from the beginning.

  Russ

• Problem with the graph friv.

  many other times I have tred to install the graphics driver in my sony SVE15136CNS time model.every install sucessfully.and I restart my laptop.but after this driver does not display anywhere.so I faced the problem with more video buffring.

  Hello

  Video buffering problems are most often caused by slow download speeds, etc, not graphics drivers.

  "How to stop the video buffering.

  http://Techchannel.RadioShack.com/stop-video-buffering-1822.html

  See you soon.

• Problems with lines of text in the catalyst

  Hello the development team:

  We have problems with the text and flex. One of our files generates 18 errors at the margins of the text, here is a picture with the problems:

  

  This error will not let me run the application we did

  Can I fix it in the Catalyst? How? I have to go back to illustrator, if I do, I can't go back without losing my current job in catalyst?

  Concerning

  No, unfortunately there isn't a way to remove the margins of Catalyst.

• Problem with lines in Illustrator using the Wacom Tablet

  Hi all

  I have no idea why I'm having this problem in Illustrator. I use the small Intuos Pen Tablet (CTL-480), and my lines in illustrator is really strange. Even when I turn off the pressure in the brush settings, there is a gap in the line (it takes just one line of the same thickness). The Tablet works perfectly in Photoshop, but because I use the tablet to create art using plates (typography), it is easier and better for me to use illustrator. You are not sure that someone else had a similar problem or know maybe a setting I could change or try to fix it?

  I have attached a picture of the problem.

  

  

  Thank you for your help.

  This is a known issue.

  If all you want is a line single width, do not use brushes. Use the pencil tool and a simple blow

  If you apply a calligraphy brush, apply the effect zig - zag to it with a value of 0, then a setting of about 100 (turn on the preview to adjust)

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• Problems with lines due double date/time in the query

  Hello
  
  I'm trying to draw a list of the counties of the test sample. I want only 1 rank by the test result so that I can build a report in Cognos showing the rate of an outcome determined as a percentage of the total causes a range of dates.
  
  My problem is that I get duplicate for the same result rows: in the example below, I have 2 to 5 lines for each result instead of only 1 for each result. I have this reduced up to caused by the date - the date is the same, but the times are different, if several lines are drawn. I tried to use tronque(), among other things, but although the output now shows the same date without the time part, duplicate rows are always drawn.
  
  Any help would be appreciated!
  
  This is the code for the query:
  

  SELECT DISTINCT
      io.lab_id AS "LAB ID",
      l.name AS "LAB NAME",
      mtr.marketingtest_id AS "TEST ID",
      mtl.name AS "TEST NAME",
      mtr.marketingresult AS "MARKETING RESULT",
      COUNT(DISTINCT mtr.sample_id) AS "NO OF SAMPLES",
      TRUNC(os.statusdate) AS "STATUS DATE",
      os.orderstatuscodes_id AS "ORDER STATUS",
      io.redoorderid AS "REDOORDERID",
      mtl.locale_id AS "LOCALE"
  FROM igen_sample s
  INNER JOIN igen_igenityorder io ON s.igenityorder_id = io.igenityorder_id
  INNER JOIN igen_orderstatus os ON io.igenityorder_id = os.igenityorder_id
  INNER JOIN igen_marketingtestresult mtr ON s.sample_id = mtr.sample_id
  INNER JOIN igen_lab l ON io.lab_id = l.lab_id
  INNER JOIN igen_marketingtestlocale mtl ON mtr.marketingtest_id = mtl.marketingtest_id
  
  WHERE mtl.locale_id = 1
  AND os.orderstatuscodes_id IN (8, 9)
  AND mtr.marketingtest_id = 84
  AND os.statusdate BETWEEN '24-OCT-2011' AND '31-OCT-2011'
  
  GROUP BY mtr.marketingtest_id, mtl.name, mtr.marketingresult, os.statusdate, os.orderstatuscodes_id, io.lab_id, l.name, io.redoorderid, mtl.locale_id
  ORDER BY mtl.name

  Hello

  893078 wrote:
  Hello

  I'm trying to draw a list of the counties of the test sample. I want only 1 rank by the test result so that I can build a report in Cognos showing the rate of an outcome determined as a percentage of the total causes a range of dates.

  My problem is that I get duplicate for the same result rows: in the example below, I have 2 to 5 lines for each result instead of only 1 for each result. I have this reduced up to caused by the date - the date is the same, but the times are different, if several lines are drawn. I tried to use tronque() among others...

  TRUNC looks like what you want. If you want a single line per calendar day, or need to GROUP BY TRUNC (os.statusdate).

  AND        os.statusdate  >= TO_DATE ( '24-OCT-2011'
                              , 'DD-MON-YYYY'
                          )
  AND       os.statusdate  <  TO_DATE ( '31-OCT-2011'
                               , 'DD-MON-YYYY'
                          ) + 1
  GROUP BY  mtr.marketingtest_id
  ,            mtl.name
  ,        mtr.marketingresult
  ,        TRUNC (os.statusdate)               --     <==  CHANGED
  ,        os.orderstatuscodes_id
  ,        io.lab_id
  ,        l.name
  ,        io.redoorderid
  ,        mtl.locale_id
  ORDER BY  mtl.name
  

  If os.statusdate is a DATE, don't try to compare it to a VARCHAR2, as 24 October 2011 "." Compare DATEs to other DATEs.

  Furthermore, GROUP BY product automatically separate results. If all GROUP expressions in the SELECT clause, there is not need to say SELECT DISTINCT .

  Published by: Frank Kulash, November 23, 2011 09:34

• What is the problem with line 27 in my PHP?

  OK, I tried the new PHP code and I get an error of syntax on line 27.  I don't know this is probrably something I'm missing here.

  

  Here is my real code in the form of HTML mail.

  < p > < / p >

  < p > < / p >

  < p > < br >

  < /p >

  < form id = "form2" name = "form2" method = "post" action = "contactformprocess.php" >

  < table width = "1166" height = "167" border = "0" align = "center" cellpadding = "4" cellspacing = "0" >

  < b >

  < td width = "211" align = "right" > < label for 'name' = > name: < / label > < table >

  < td width = "933" > < input name = "name" type = 'text' id = 'name' size = "35" maxlength = "80" / > < table >

  < /tr >

  < b >

  < td align = "right" > < label for = "email2" > Email: < / label > < table >

  < td > < input name = "email" type = "text" id = "email2" size = "35" maxlength = "90" / > < table >

  < /tr >

  < b >

  < td height = "25" align = "right" > < label for = 'phone' > phone: < / label > < table >

  < td > < input name = "phone" type = "text" id = 'phone' size = "35" maxlength = "12" / > < table >

  < /tr >

  < b >

  < td height = "22" align = "right" > < City of label for 'service' = >: < / label > < table >

  < td > < input name = "City" type = "text" id = 'city' size = "35" maxlength = "35" / > < table >

  < /tr >

  < b >

  < td height = "4" align = "right" > status: < table >

  < td > < input name = "State" type = "text" id = 'State' size = "35" maxlength = "50" / > < table >

  < /tr >

  < b >

  < td height = "5" align = "right" > < label for 'comments' = > comments: < / label > < table >

  < td > < textarea name = "comments" id = cols 'Comments' = '33' rows = "5" > < / textarea > < table >

  < /tr >

  < b >

  < td height = "13" align = "right" > < label for "clear" = > < / label > < table >

  < td align = "left" > < label = "submit" > < / label >

  < input type = "submit" name = "submit" id = "submit" value = "Submit" / > < table >

  < /tr >

  < b >

  < td > < table >

  < td align = "right" > < table >

  < /tr >

  < /table >

  < / make >

  < p > < /p > < table >

  Ask the host of why the mail() function is rejected. I don't see anything wrong with the code.

• Is there a problem with my graph?

  I restore my driver... so after that when I watched films of 720 p it does not work like glitching krik krak... JST like that... so is - this evil that I restore my driver?

  Hello

  Thanks for the reply.

  Please, try to reinstall the updates from the Sony Web site and check the issue.

  http://www.Sony.co.in/product/sve1513cyn

  In addition, see the article.
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

• Problems with graph XY 'forget' field properties

  I have problems with a graphic XT in my loop.

  The graph has 10 locations which at any time can have anything from 0 to ~ 1000 points, often a few plots will have much less ploints than others. There is an option to select the user to view all items or just the most recent game.

  My problem is I want the chart to reflect the data input and a single point during an update, so I have a string of points rather than a line.

  When I click with the right button on the chart and go to properties, I change the style of point of full circle and turn off the interpolation of the line. I then click on save these default values and save the vi.

  However, once I run the vi, the graph keeps parcels 1 through 9 (not ground 0, this remains as I want) to have no displayed point and the line of interpolation on.

  Anyone had this problem before? Ho solve you this problem?

  I know it can be fixed, because I had this problem a few months ago on a similar vi and after weeks of struggle, I solved it, but I just do not remember how I did it.

  Thanks for any help, at the moment I can't post any code. Note that the chart data show is all perfectly fine, just the properties of the plot are forgotten.

  HI DarraghCorrigan,

  With regard to the problem expressed in your initial post:

  "once I run the vi, the graph keeps parcels 1 through 9 (not ground 0, this remains as I want) have no displayed point and the line of interpolation on."

  This is due to a bug in the software LabVIEW by which all changes that are made to the parcel properties (for example to change the color of a conspiracy) will not be retained, except in field 0 that is not affected. Our R & D department are currently studying this problem so that it can be fixed in future version of the software. The solution recommended for this problem is to pragmatically set parameters of track at the beginning of the code using nodes of property.

  As I understand it, is not the main issue you are experiencing. If you are setting the properties for a field (using a few nodes property described (e) which are then deleted or rewritten on a XY Chart, I understand, is that there is no way that LabVIEW can remember and preserve these properties.

  As you rightly suggested, a way to easily overcome this problem would be to define default chart properties, so that when you remove/rewrite a piece and then add it again, it is always by default these properties. Unfortunately, it is not currently possible to do even if it was recommended as a suggestion of product is a feature that is to the study of implementation in future releases of LabVIEW.

  I think that the question you need to address is the fact that you're at some point reset the graph by sending an empty array to him such that the set of your property are lost. If you can find and remove this section in your code, you should be able to solve your problem.

  I hope this helps.

  Best regards

  Christian Hartshorne

  NIUK

• problem with the easy line of site Web

  I have a problem with a site called easy line. It's using words on my ebay page to link to advertisements.

  No idea how I can get rid of him?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.