Problem with links to another Web page when using the Internet

Similar Questions

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• Laptop goes down when using the internet - Satellite Pro L100

  Hi, I had my laptop (satellite pro L100) 5 days and I connect through a router to the internet, but in the last days when im using the internet, a Help window automatically opens and approximately 90 internet Explorer windows open, it became really frustrating, im using norton which came with it, everyone has ideas ive ran a scan for virus and adaware but came up with nothing

  Thank you

  Mark

  Hello

  I understand you very well. For me it s a shock if 90 IE Windows would appear on my small laptop screen. SHOUT OUT! : O

  However, have you installed any 3rd party applications that can open the windows?

  I think that this is not a normal state of the system and if it appears the days of view therefore, you should try roll back BONE to the beginning.

  In addition, you can try to check in the MSCONFIG what background process runs on the operating system. If there are some very strange processes you must turn it off and you must remove the Autorun.

• If I try and follow a link from another Web site to open the other I get awclick.php pixels (GIF Image 1 x 1) in a new tab instead of the web page I want.

  I tried to open a Web site as a link from another site and I get a new tab that says:

  awclick.php (the Image GIF 1 x 1 pixels)

  I can open the Web site without clicking on a link to it simply by typing the address, but as this is a cashback site that I'm the link it does not help!

  Hiya,

  I don't get a GIF as Bodspice mentioned above, but I'm left with a blank page that has the following URL:

  http://www.awin1.com/awclick.php?mid=2481 & ID = 47868 & clickref = 319541108 & p = http :// www.blinkbox.com/Movies/Catalogue/Free

  I use Windows XP and Avast firewall as an anti-virus.

  I tested it on Chrome, it took me to the page immediately without any problem.

  No idea why and how to get rid of this problem? I'm not keen on the use of Chrome and prefer Firefox.

  Thanks in advance.

• Link to another Web Page text field

  Hello

  I have a text field that displays an external URL. Is it possible to make this clickable area and open this web page as a separate pop-up not close the page you on that? An application such as MS Access will do that by setting the display in the form of URLS, but there is no option for this under the option of data types.

  If it is possible how do you?

  Thank you in advance,

  Kind regards

  Steve Welch

  Have you tried to edit your binding element and by setting the parameters of the element :

  Text of the pre element:

  http://&P1_MYLINKITEM. ' target = '_blank' >

  After the text of the element:

  (this works when display as = "View only")

• problem with pdf download of web pages

  Number of times a web page that has a pdf that he will not read my adobe. All I get is a circle in the upper left corner of the page with the pdf file. What is the solution?

  Yes, but please see answer #2. This gives an idea to try it - it works? And we must help information.

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• Problem with a complete refresh materialized view when using rownum

  Hi all

  I had a problem with rownum when complete using Refresh

  I use rownum when you create the materialized view, and this is the generation properly. But the question was when I even refreshing, rownum was not get sorted in ascending order.

  anyone encountered this scenario

  rownum is determined as the line came out, also "order by rownum" does absolutely nothing.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/pseudocolumns009.htm

• Portege R500 12H3G: none of the Web pages by using the connection 3G, Firefox, IE

  Hello

  I have a toshiba R500 12 H and I have a problem with the 3G.
  I use windows XP. MobiLink is the software that connects the PC to 3G.

  My phone company is "NRJ" with the SFR network. The VPN code is wapdebitel.
  Apparently, the PC connects correctly to the 3G and the emails work for download and download.
  The software that manages my email is "the bat".

  The problem is that when I run Firefox (or IE), it seems to connect to the site but the Web page is not loaded and the page is always white, white;
  I don't know if it's a problem with the browser or connection.
  I tried to download or send an e-mail to several megabytes, it works perfectly, so why firefox does not load web pages?

  Thank you

  Sylvain pelletier
  Paris

  Hello

  Using Win 7?

  If so, please check this:
  Installation 3G Novatel (Mobilink) for Windows 7
  http://APS2.toshiba-tro.de/KB0/TSB0302TL0000R01.htm

  Also, check out this how to establish the connection:
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

• 7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF

  A week ago I noticed that the analyses using the ADF put a black line about an inch from the right edge of the page.  This will not occur during the analysis of flat glass; only when you use the ADF.  I checked the glass and paper tray are clean and free of debris.  I wish that it there a way to display an image of what I'm talking about.

  The line is about the thickness of a vertical margin of Notepad and gray line.

  Someone at - it ideas other than buying another printer?

  BINGO!  That's all.  The glass was dirty.  Thank you very much.

• HP laserjet M425dn MFP 400: white pages when using the copy flow tray

  Our HP laserjet MFP M425dn of 400 printer suddenly started printing blank pages when I food pages in the sandbox of copy on top of the lid and go through the routine of copy 'optimize '.  When I place the original on the glass, then select copy, copies are missing from the top of the page.  I spent around and in the settings and made sure that I selected the normal size of plain paper (not legal, etc.), but have not solved the problem.  Any suggestions?

  There is a "Reset Factory Default" option in the Tools menu. Or you can reset the printer. This forum post has the details: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Cold-Reset-HP-LaserJet-Pro-400-MFP-M425dn/td-p/3105277

• Loss of internet connection - occurs randomly when using the Internet

  I can surf the Web for a few minutes or hours and out of nowhere, I'll be unable to connect to the internet. I tried with Firefox and Internet Explorer. The computer always says that it has internet connection but the pages may not load. To solve the problem together, that I have to do is restart my computer.

  Can I have a virus? Is there a simple way to solve this?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon

  Mick Murphy - Microsoft partner

• I reduced the eiba web page when using of I do not know the keys that I pressed to do so, not able to resize the page

  I was using this page of competition I frequent when I dragged it is smaller, how I don't know

  All good thanks now

• How can I reduce the size of the Solution Explorer window when you save a web page by using the Page save (Ctrl + S)?

  Save the Page (Ctrl + S) used to open a small window of the Explorer (Windows 7 OS). All of a sudden (after update for FireFox 37.0.1), it opens a window of browser enlarged (full screen). The passage of the mouse on the window edge, arrows a size change appear, but do not meet the drag. How make the window smaller, or reset the Page save (Ctrl + S) so that it opens a small window again?

  You can open the system menu of the window selector to file via Alt + space to check if the window is not maximized?

• output to a web page by using the slice tool

  I have a psd file attached. I want to create a website. That's what I want to do, I want to click on "Home", and I want a website to appear on the body or "slice 8", but whenever I click "Home" of the entire page is replaced by the link and the menu has disappeared. I guess, I'm doing something wrong. I hope that you people make my idea.

  I really like her, if you can look in my file and show me the way.

  Thank you

  When you use save for web in photoshop, you can change the output to get slices at tables or css. It cannot create the framework for you.