problem with monitor and system

the power light is on, but the system is unresponsive and freezes until it can I do to solve this problem

Advertisement

Hello

BTW, if the monitor is separate from the computer (not a laptop) then check the cables
at both ends - drop, and then hang them up in case there is a connection problem.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

    I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

    Hello

    Thank you for your response.

    Make the SFC scan and check the status of the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I would also advise you to check the status of the issue in a new user account.

    Create a user account:
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    I hope this helps!

  • Problem with IMovie and Quick time

    Hey everybody,

    I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    Could someone please help me solve this problem?

    Thank you very much in advance.

    Concerning

    Could someone please help me solve this problem?

    Not only based on what you already said.

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  • Satellite C660-223 - system caution: "" problem with cooling detected system "".

    When I carry my Satellite C660-223 somewhere for example wear at home to College in a protective case in my backpack, I sometimes get a window warning flashing upward every 20 seconds or so said system + "warning: a problem with the cooling system has been detected." Please turn the computer off immediately and return it for service. +

    This only happens when I transported somewhere and as a first step, that these warnings system flashed only sometimes upwards after I hauled somewhere, but in the last two years, he started to get pretty much whenever I took the laptop somehwere. When the system warnings blink until the computer doesn't feel a little warmer than normal. no danger of overheating, immediately.

    I didn't fix it because the problem seems to resolve itself the next time that I carried the computer somewhere. It's a very strange problem where the short-term solution was the same as the cause: as in I would take the laptop somewhere, the warning system flash upwards and I learned that take "for a walk" would fix somehow everything which was the 'problem '. I solved the problem in this way too often so he could be a coincidence.

    So for a while it wasn't really a problem because I just didn't take the laptop anywhere. But the warning system has recently start flashing to the top if I wear just the laptop on the floor, and the warning system does not disappear with my method incredibly non-tech-savvy to "go for a walk", which I am sure many here would give something to laugh :).

    The obvious answer is that I need to get the service pronto thing, but I'm in the middle of final exams and the situation of tech in my house means I can't leave the laptop away for service for who knows how long when I really need to study.

    Responses, I'm hoping to get are ideas as to what actually caused this problem and short-term solutions that are a little better informed that my approach "going for a walk".

    I think THAT what is, is that the movement to carry your laptop around in a backpack something within the done cooling system moving out of place causing the evil TI work. I say this because, while writing this thread I was turn the laptop over and over again to get a look at the stickers on the back and the practice that seems to have "solved" the problem of warning system because this window flashes up while he was only a few minutes ago.

    It seems so that all component moved his place before been moved back again by the movement to turn the laptop over and over. And I was not even take him for a walk!

    Any help? Thanks in advance.

    Hello

    This notification may appear for different reasons.
    The alert might appear due to
    (1) cooling system malfunction
    (2) blocked cooling vents or fans
    (3) software question (VAP - added value package or BIOS)

    Malfunction of the cooling system, you should contact the service agents at the difficulty.

    In case of a blocked vent and fans it s enough to clean the parts using a jet of compressed air.
    This allows to get rid of dust inside the cooling module.

    If the vents are not blocked and you still see this message, check the application of the service station for updates on your computer. If any are found, download and install.
    You can try to uninstall or update the Toshiba value added Package. This package contains a few essential tools and utilities that control the cooling system too.
    Also check BIOS update.

    But if you continue to receive this error, your laptop may require repair

  • Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

    Hello world

    I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

    • Screen goes black, everything seems normal.
    • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
    • Keyboard input does not help. Does not meet what it is.
    • The only thing left to do - stop hard.

    And if I shut down the operating system:

    • Windows normally stops, close all applications, screen goes black.
    • Fan on, led on.

    I did not notice these problems with restarting and the hibernation.

    Two things I've done in this gap of the year:

    • Replacement screen. An old broke. Thanks to my cat...
    • Formatted the drive. I don't think it would do anything diffirent.

    So, any help would be appreciated.

    Thanks in advance,

    Kebab

    Hello

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • Satellite A660 - message: WARNING: a problem with the cooling system

    My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

    So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

    He also mentioned that I could use the machine with a cooling pad until then if I wish.

    Any feed back?

    > Yes the fan had stopped working and touchpad area was hot.

    In this case, there is really a hardware problem.
    But I m wondering why he should replace the HARD drive and the motherboard
    Perhaps only the cooling module began at malfunction of course this is just a speculation
    If the technician has checked the material, then they need to know what parts are not OK.
    So don t think you have no choice.

    But the guarantee is valid for all is free

  • Satellite P500-12D - a problem with the cooling system has been detected.

    Hi there everyone,

    I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
    WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

    Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

    TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

    Hello

    Which program gives you this error message about the cooling system?

    Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
    Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    If it doesn't help, contact the nearest service partner.

  • Satellite U500 - problem with the cooling system has been detected

    I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
    Before that, I would like to know if anyone has had this problem and if there is a software solution?
    HIERARCHICAL

    Check HERE to see if anyone else had this problem in the past.

  • Qosmio G10 - a problem with the cooling system

    Hello

    Put on my G10-100 this morning and got the following message:

    "A problem with the cooling system has been detected. "Please turn off immediately and the return of serve.

    My other machine running and connected on toshibas website and found the number of support.

    After which left a message there, the automaton response was "we aim to get back to you within the hour," Needless to say, it's now 6 hours later.

    I can't find whether on the web or in these forums, has anyone encountered this before?

    I'm still in my 1 year warranty, but he soon run out.

    Thank you
    James

    Hello

    This looks like a problem of overheating on your device.
    In this case, you must contact the ASP.
    I don't know if it's a phone number just to post you but please visit this m link:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    You will find a Toshiba service partner who is responsible for your country.
    It should help you to solve this problem

    Good bye

  • Qosmio G20 error message: problem with the cooling system has been detected

    I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

    Error message: Warning: a problem with the cooling system has been detected.

    I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

    When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

    I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

    I would be grateful if someone could give advice if the problem is the fan or something else.

    If the fan is the problem, where I can buy a: i live in the United Kingdom?

    Hello

    I think there might be something wrong with the cooling module and the replacement would be necessary.
    Usually, this should be done by an authorized provider (ASP) in your country.

    Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

    So contact the ASP in your country and ask for later handling.

    By the way; also, you can buy the cooling of the ASP module!

    Good luck

  • Compatibility problem with Vista and iTunes

    I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

    When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

    Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

    Don't know where to direct this question if any help you could provide would be greatly appreciated.

    Thank you.

    Hello

    iTunes is compatible with Vista and there should not be any problem.
    Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
    If your laptop can not boot Vista correctly, then you should try the repair feature.

    Turn on the computer and press F8. Now you will see the advanced boot menu.
    Now, you have many choices.

    As a first step, you should try the option called: last good known Configuration (Advanced)

    If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

    If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

  • Satellite A40 - attention: problem with the cooling system has been detected.

    Hello guys,.

    From time to time, I get the following message is displayed:

    WARNING: a problem with the cooling system has been detected Toshiba
    Please turn off computer immediately and return it for service.

    I have Windows XP on it.
    I opened the cooling fan and clean it. Of course, I found it dirty rally.
    But still, I get this message!
    What should I do?
    I live in Northern Germany.

    Any advice is welcome and thanks in advance.

    Ibrahim

    Hello

    The message says it all!
    In this case you should contact the service provider authorized in your country!

    > I opened the cooling fan and clean it. Of course, I found it dirty rally.
    Eventually, the cooling modules don t like needs and that is why the message again!

    Nothing to my friend... you need help laptop technician

  • Satellite C750-A103 made a lot of noise - problem with the cooling system

    My toshiba machine made a lot of noise... like a plane. And it gives me the message "a problem with your cooling system has been the detection.

    Turn off immediately and come back for the service "."
    What should I do? It has been recently formatted, also?

    + The message was edited: mode number + added

    You did not provide details on your laptop model and system that is installed on the laptop.

    Even his I don't know how old is the laptop, but according to this short message, it looks like there is a problem with the cooling system.

    Probably notebooks cooling fan doesn t work properly and the unit cannot be cooled as it should this can lead to cell damage through an internal temperature longer.

  • Satellite C660D - a problem with the cooling system has been detected

    My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

    I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

    I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

    Please help quickly, this prevents me from working and even other things now.

    Thank you

    Hello

    Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

    But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

  • Error message "A problem with the cooling system" on Satellite A660

    Hi all

    Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

    The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

    The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

    Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

    I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

    Thank you

    In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

    I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
    I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

Maybe you are looking for