Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.
Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.
My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.
Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.
I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.
I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.
I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.
Thanks in advance for all who are able to provide me with assistance.
Thank you
Alison Black.
HUSTLE, LOYALTY, RESPECT
John Cena (WWE Wrestling Heavyweight Champion)
Hey
HP have the customer.
has attempted to call them abt the question because I'm clearly useless with this technology * beep *.
but fisgured this is a setting of the printer.
so if you have the HP SOLUTIONS CENTER's new installed.
down the down theres a SETTINGS tab click on it.
go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.
the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED
Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.
Tags: HP Printers
Similar Questions
-
PSC 1610 all-in-one printer: PSC 1610 will not print
HP PSC 1610 all-in-one
No including photographic paper feed and the following messages are received: paper jam or paper. This is not correct. Jam has recently replaced; all paper rolls have been cleaned up with water. Any advice would be appreciated.
Thanks for your reply. I think you are right to say that it is a hardware sensor problem. In the circumstances, I'll buy a new printer/scanner/copier.
-
I have a hp psc 1610 all-in-one printer
my continuous printer give error message paper jam, I checked and there is no paper in the printer you can tell me how to solve this problem, I have windows xp I have uninstalled and reinstalled software but get the same message
There is a document that addresses the issues of paper jam in PSC 1610. This document can be found here.
Hope this helps
-
My Mac does not recognize my PSC 1610 all-in-one printer.
All of a sudden my mac does not recognize my 1610 printer all-in-one. I think it may have something to do with the system 10.8.2 upgrade but I'm not sure. I followed the instructions and uninstalled and reinstalled the software. Software update does not seem to think that miss me anything, no update is listed. Nothing has changed other that the OS and I use this computer and the printer for 3 years. No printer appears in the list of system preferences. Error when I try to print is 'not connected printer.
Hi beaumast,
Have you tried using a USB cable?
If you tried it on your friends computer and got the same experience there is a possibility that the USB port on the printer has malfunctioned. Here are some links that you may find interesting if you consider upgrading your printer.
Current for sale Photosmart printers
HP out of warranty of the Support Options for selection of printers HP
-
HP PSC 1610 all in one printer Scanner Copier
Seen the documents problem scanning.
Receipt of message is 'no scan options '.
Where can I get software to 'device '.
searched for the PC using HP Image Zone and can't find it.
Why don't you try uninstall the program from your computer and put it back, via the software provided by HP (link below). Try and let me know what happens!
Have a great day!
-
PSC 1610 all-in-one several error messages
Hi and thank you for providing this service. I have a PSC 1610 all-in-one, bought in August 2005 which is used with a Compaq Presario Windows XP (they were purchased as a Pack). I started to receive error messages, more which start with 0 x, I have determined is an ink system failure. Sometimes the messages sometimes say 'failed to initialize' or 'hw_interrupt '. At this point, I can use the power button on the 1610 and it restarts, sometimes producing a print. Other times he repeats just with a different error message.
I've uninstalled and reinstalled the software from the original CD, and also did the instructions on here regarding unplug USB cable, power unit, waiting, etc. but unfortunately, I'm still having the same problems.
I guess my questions are 1) is there anything else I can try to solve the problem and get back to happily print my genealgical research and/or 2) because the machine obviously lack of professional maintenance and it's so old, I would be better off just buying a new all-in-one? (New Anthing I would buy would have both with this older Presario and a laptop HP 3 year running Windows Vista).
HI -.
I'm guessing you've already gone through the steps described in this document? If so, on the only option I know is him having served. In answer to your other question, with the price of all-in-one now, it is probably a better option to just buy a new one. You can find the plug on current on this site printers. You can do some comparisons between several printers to see what OSs are supported. Wish I had better news.
Hope that helps.
-
HP Psc 1610 all-in-one: Hp psc 1610 without Windows installation
I'm trying to see if my printer will be able to work without the Windows installation disc. I have a HP PSC 1610 all-in-one printer. I'll buy the cable from Sun to hang it to the top, but I can't find the drive mentioned in the installation program. I don't know if it makes a difference, but I have a MacBook Air with Windows. Comments would be appreciated for what I can determine if I need to buy a new printer.
Windows 10 has a 1600 integrated printer driver, just us the option to Add a printer in Printers and devices.
-
HP psc 1210 all-in-one printer: HP PC all-in-one printer
Printing test page fine. Prints the first page of the document very well. After than that, each page becomes lighter and blurred until unreadable. This "bad s. Printer is several years old and has been the impression so far.
Hello @bdr777,
Welcome to the HP community!
I hope you have a pleasant experience here.
I would like to help with the discoloration print issue you have with your HP PSC 1210 all-in-one printer, when printing from your computer Windows 8.1.
Could you try to make 3 copies of something on the printer for me? If the three pages of fine print, then we know that the problem is related to the software on your computer. If the pages are starting to fade and blur, then we know that the problem is probably with the printer cartridges.
Are the cartridges you use genuine HP? Can you check the date of guarantee on them for me if they are? If they are relatively old cartridges, the nozzles down can be a bit clogged and start getting muddy upward while you print. (This is particularly likely if you use the printer very rarely).
If copies are still faded and blurred, try these steps to clean the cartridges:
- Open the all-in-one with the power on and then remove the ink cartridges by slightly pressing the cartridge while pulling gently toward you.
- Inspect the ink cartridge ink nozzles and contacts for the accumulation of debris and ink.
- To clean build-up, dip a q-tip in distilled water (or water if distilled water is not available) and press the remaining water from the swab.
- While now the cartridge by the sides, as shown in Figure 3 below, gently wipe off any buildup of debris.
- Reinsert the ink cartridges and perform the alignment of ink cartridges.
- Print a test page to check the ink cartridges and rinse any remaining accumulation of the nozzles of the cartridges.
If the copies to print without any problem, try to download the HP printer installation wizard to make sure you have the latest drivers for your product.
I hope this helps!
Please reply to let me know if we have solved the problem.
-
Can I e-print to my HP PSC 1610 all-in-one?
Hi JudithAMorrison,
Just to add some additional information for you, your PSC 1610 is not able to ePrint, as it was released before that HP has applied the ePrint technology for their printers. All new printers are usually capable ePrint, so if you are wanting to acquire a range of HP active ePrint printers, you can contact HP Technical Support at the 1-800-474-6836 and see what kind of offers, they have to get you an active ePrint printer.
If you need anything more, please let me know. Have a great day!
-
HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)
HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)
Hello
Please see the links to check ink levels.
Check ink levels
How can I check my ink or toner levels?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels
-
Windows RT and HP PSC 1510 all-in-One printer connection
Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.
Hello
I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:
http://support.HP.com/us-en/document/c03168175
Kind regards
Shlomi
-
HP PSC 1510 all-in-one printer
My OS is Windows 7.
I tried to get this printer is installed. Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."
Hello
Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.
Follow the steps for troubleshooting instructions.
(1) how you try install the printer?
(2) using a CD/DVD to install the printer?
Follow the steps for troubleshooting instructions.
Method 1:
I suggest you to refer to a link.
Diagnose and automatically fix problems printing and printer.
http://support.Microsoft.com/mats/printing_problems/
Method 2:
I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.
HP PSC 1510 All - in - One Printer Drivers & Downloads.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800
If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.
Thank you.
-
HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install
Hello
HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not. I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver. I have uninstalled the software 3 times and reinstalled. I unplugged, disconnected, re-downloaded and re-installed. I downloaded the 64 bit vista drivers (they do not work). I came to your site to seek support that is denied to me because the printer is out of warranty. Unless, of course, I want to pay for it. Which I did, after spending a considerable time (see above) trying to get it work on Windows 7. Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.
Now what can I do to get this printer to work?
I solved this by using Windows update, which then installed a driver in the end.
This was not a great experience.
Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver. Then you perform the update from Microsoft to get a signed HP driver? Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway. A huge waste of time and effort. Two weeks to solve a problem that should have been done in twenty minutes.
Not good PR client on any level.
-
Printer HP PSC 2355 all-in-one cut at the bottom of all the letters and numbers.
I have a HP PSC 2355 all-in-one printer and use Windows 7 Home Premium 64-bit.
When you print documents, the bottom of the letters and numbers do not print.
Hello techphobic
I'm glad that you have solved your printing problem. If the problem recurs, do not hesitate to post back.
As a possible explanation, looks like you had a faulty cartridge or the low ink level. Part of solving the problems of print quality is to try another cartridge that you already have and it resolved the problem. A cartridge bad or low ink level can cause horizontal stripes in images either because it doesn't have enough ink or it has problems, releasing the ink. If the lower part of the page is cut off, then it looks like the cartridge's ink.
I mentioned the notebook because it is a very basic application that you can print from. Sometimes printing problems are specific to a particular application and printing from Notepad allows you to isolate the problem. As a dedicated article for printing from the Internet problems, I wanted to narrow the problem to the right Internet printing.
Problems printing from the Internet -
I have a problem with the HP psc 2210 all in one printer.
My printer is an hp psc 2210 all-in-one
All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?
Hello
Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.
http://WWW8.HP.com/us/en/support-drivers.html
Or ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
Maybe you are looking for
-
Hey there I am new to Labview and need help. I want to do an interpolation of surface and to do use "p 3D to adapt." Subsequently, I want to calculate values and show them to see how it is about good. I use a node formula for this because I want to c
-
Dear Sir. I have laptop Acer V5-473PG for over a year now and using W8.1. My problem is now (for a month), whenever I start my laptop, the screen goes to "insydeH20 Setup utility". Then I have to press ESC, press enter for 'Yes' and the screen will c
-
OfficeJet Pro 8600 loses wireless connectivity
After sitting idle for a period ranging from a few minutes to a few hours, my 8600 OfficeJet loses connectivity with my DI-524 router. When this happens, the 8600 shows an IP from 192.168.0.128 (only the IP I never saw him show). I can not print from
-
PrintScreen of Windows 7 doesn't work does not correctly
Not sure if it is in the correct category but... I downloaded Windows 7 Pro 64 - bit from my school DreamSpark account and installed on my computer, which is pretty old about 5-6 years. There should not be anything wrong with the copy of Windows, it
-
Hi all I have a router with IOS advanced ip services 12.3.T3 1760 and it is configured as a hub dmvpn and it works very well and the rays work too. I want to know if it is possible to configure easy vpn server on the same router, and both services ar