Problem with my Kodak printer

I installed a new black cartridge and the printer tells me that he needs a new.

It may be faulty, or you have not removed all the envelopes of protection or tabs before installing it.

writing in the new message: * e-mail address is removed from the privacy... *

I installed a new black cartridge and the printer tells me that he needs a new.

Tags: Windows

Similar Questions

  • Tecra A8: Problem with the USB printer connected to the Port Replicator III

    Hi all

    I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

    I called the technical support of my country, but her is not recorded similar problems.

    A person with similar problem? Some help would be very appreciated.

    Thanks in advance.

    Hello

    Seems like a strange question... Already done the standard procedure in the event of such errors? :)

    The standard procedure is somehow similar to the following:

    -Update your BIOS
    -Update all the drivers for your machine
    -Update your printer drivers
    -Update your operating system

    If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

    Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

    I'd be happy to hear feedback from you on your situation...

    Welcome them

  • Problem with not to print all pages in a document with a HP Photosmart 7520

    I have a HP Photosmart 7520 networked printer.  If I try to print a document of medium to large sized (25 pages), it prints the first 20 without problem, but the remaining pages are incomprehensible and illegible. Initially, because it appeared that the problem was caused triny to print in the background with the closed document, so I tried to print the entire document with it open along the.  This no longer works.

    Hello CRC8591, I hope you are well

    I understand that you have a problem with printing a 25-page document that the last 5 pages are so do not print correctly and show to be unreadable. I want to help you with this question, the best that I can!

    I have a few questions to familiarize yourself a little more with the question and I have also some suggestions to start with.

    1. what operating system do you use?

    Operating system Windows am I running?
    Mac OS X: how to find which Mac OS X Version is on my computer?

    2. try to print the document of several pages of another program. It prints successfully elsewhere?

    3. the same problem occurs when you copy or scan multipage documents?

    Try:

     

    1. reset of the printer and leave unplugged for at least a minute.

    Plug the printer directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help this situation.

    2. check if the printer needs a firmware update: get the latest Firmware and updates

    Let me know the results!

    Have a great Tuesday

  • HP Officejet Pro 6830: Problem with head of printing and error 0xc19a0020

    Tried on MS 8.1 64-bit and Mac OS.

    Having a problem with the printer.

    Constantly saying problem with printhead 0xc19a0020.

    Tried the troubleshooting suggestions, no results.

    I tried unplugging ink and placed back, even.

    Any suggestions? Should I replace the print head? Possible with warranty?

    Hi @Sergey_Burnos

    You will need to contact HP Support to obtain a replacement. Are you based in the United States? If so, please call 1-800-HP-invent (1-800-474-6836).

    Can you please let us know how you get on?

    Thanks, Ciara

    http://support.HP.com/us-en/document/c04839288

  • I have problems with see a 'Print Preview' a message from Hotmail. Which shows on the screen is print ONLY lines header and footer from the preview. What's wrong?

    What I usually do, it is preview before printing a message and then decide exactly which page (s), I need printing.   I have no problem with e-mail messages that crosses on my another account which is with att.my.yahoo.   So what's the problem with Hotmail via my MSN.com account?   What I am doing wrong?

    Hello

    ·         Are you able to print from other e-mails without any problems?

    I suggest you to take a look at the links below.

    http://windowslivehelp.com/thread.aspx?ThreadId=57b3371c-7721-43A9-8CF0-af58408a4c03

    http://windowslivehelp.com/thread.aspx?ThreadId=a1d6ab33-baeb-4e38-a74f-607a5a971d0a

    Also, take a look at search results

    I also suggest that you send your query in windows live forums for further assistance.

    Windows Live Solution Center

    http://www.windowslivehelp.com/

  • problem with wireless portable printer

    Windows 8

    HP Laserjet 200 color M251

    I had this set up works correctly (I forgot how I did it), until we have had an interruption in the internet service last night.  Today, the display on the printer itself says its connected.  My laptop displays this PCL6 printer class driver.  I can't print anything.  Everytime I try, it is said that my impression is offline.  I checked the printer itself, and it says it is connected and online.

    Can someone please?

    Hey @Bionic1 ,

    Welcome to the HP Forums!

    I understand that you are having printing problem with your printer LaserJet M251.

    Can you tell me what operating system you are using? What version of Windows you are using, click here: Windows operating system am I running?

    You should be able to see the IP address of the printer by pressing the button on the main screen of the printer wireless. This should be at the top of the screen, then left to right. Once you have the IP address (should be something like 192.168.1.2), type it into the web browser address bar (as you would for a Web site) and try to load the page. This should open an information page for your printer, and is called a built-in Web server.

    If this page does not load, there is no wireless communication. If it does, it indicates that the wireless connection is probably fine, but unfortunately this is not always the case.

    Try powercycling your router to update the communication. Do this by unplugging the power cord from the router and leave it unplugged for at least 45 seconds. Plug back in and wait 1-2 minutes so he can come back online. At this point, try to print.

    If this fails, try to add the printer with the full functionality driver instead of the class driver. Open devices and printers, and right-click on the printer. You should have the ability to delete or remove the printer. Once it's done download and run this installation program: color HP LaserJet Pro 200 M251 series full feature software and drivers.

    Let me know if this helps.

  • HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

    PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

    I always get the same message!

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • Problem with my wireless printer and a PC.

    I don't know anything about computers so to speak to me like I'm a fool. Here's my problem I have a C4580 All in one printer and an HP Pavilion Slimline s3700y PC. It was a package deal with the upgrade of the wireless printer. Here's the problem "it seems every time I need to print something to the screen on the printer is black. I can not even put the printer off as the symbol of the power stays on. The only way for me to print something is to unplug the printer wait a few seconds, plug it in the screen lights up and back in and I can print. "It happens all the time. No idea of what the problem is? Please help before I throw this thing out the window. Thank you Richard a. Capano

    It is a common problem with the C4580. HP is working on a patch to fix it, and it should be out in mid-March. Hang in there.

  • Problem with Lightroom and printer Epson

    I suddenly have problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5 and have an Epson Stylus R2400 Photo. I use this combination from the beginning without any problem. Now all of a sudden when I try to print I get an error message that says media is released or not loaded properly. Is the case. I tried to restart my computer, the printer, and all I can think about, but nothing works. I can print from other applications without problem, so I guess it's a problem with Lightroom.

    Someone knows something similar? I was going to uninstall lightroom and do a reinstall, but I can't find my installation disk. Now I am at a loss to figure out what to do.

    Thank you

    Craig

    Try to remove your file and/or print templates.

    Lightroom is unique in many other programs that it saves and restores the settings of the printer. Some bad data may have tried to be passes. Could contribute to a 'new beginning '.

  • snow leopard 10.6 scan problem with HP F4480 printer

    Hi, would appreciate help with this. the printer works fine, but when I try to scan it tells me scanner not found - have tried to download the drivers without success, tried to use press scan on the printer - no luck - looks like I'm not the only one! Suggestions? Thank you very much!

    One more check before we shoot with heavy artillery: Preview or Image Capture, make sure that you click on the small triangle next to devices or shared on the left of the window.

    If you have done this a TI still does not work you probably leftovers from the 10.5 HP software (either because you just upgraded or you have loaded the software from the CD to the printer on 10.6).  To delete this software:

    Go to Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Hold down the Ctrl and Opt, as well as Apple and click on uninstall
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)
    Click on continue
    Let the cleaner it is.

    Now, do a software update to add drivers that the cleaner should not be deleted.

    Then, reset the printing system (System Prefs, Print & Fax, right-click in the list of printers, and then choose "Reset printing system").

    Finally, add the printer by using the sign '+' at the bottom of the printer list.

  • Printer HP5546: problem with Instantink on printer 5546

    I registered for the moment of ink when I bought my printer a few months ago.  Black print cartridge changed successfully last week.  Printer gives message "cartridge cannot be used until the printer registered with Instantink.  Instantink accont shows it is registered but shows a different email address than on the printer.  HP helpline seemed unable to resolve the problem after trying several different ways, most of which I had already tried...  Told he could talk to his manager and ringing me in two hours.  Still no call after 8 hours.  I'm not impressed!

    Hello

    Sorry to hear that you are unable to print with your ink cartridges instant, even though it is registered. If you are unable to receive a call back from support, please use the link below to contact support for assistance with your question again.

    https://instantink.hpconnected.com/us/en/r

  • HP LaserJet 4100: Problem with the universal print driver

    Desktop: HP Envy 700-214

    OS: 10 64-bit Windows

    Printer: HP LaserJet 4100 (with a USB to parallel cable)

    I was able to properly use my LaserJet for Windows 8.1 through my Windows 10 crossing (which I upgraded to about 18 months ago).  Quite recently, I welcomed Windows Installer a upgrade, and at this time there, I lost my ability to print.   It has been on my default printer, but gave an error message when I tried to print.

    I tried to "Add a printer" and selected the HP 4100 connected to the LPT1 port.  It would not print a test page, and the printer does not like in the reception of data.

    I then tried to install the (PCL6 and Postscript) universal print driver with similar lack of results.

    I tried uninstallinDeg and reinstall the drivers, but once again no joy.  Incidentally, although I'm going to Device Manager > printing queues and remove the drivers, when I set up an application like Word and select the Menu printing, many copies of drivers rest yet.  When I go to remove them using the printui/s/T2, it is said that they are currently in use and cannot be deleted.

    Yet once again, I repeat - it is not a hardware problem because everything worked well before Windows upgrade.  I just need to find a way to reinstall a driver who will speak to my printer.  It of frustrating because I was able to do that before, but may not know what I am doing wrong.

    Thanks in advance.

    Hello GaryLynn,

    You saw did a lot of things to try to solve this issue.

    However the USB to parallel isn't anHP officially supported connection type.

    in any case, what suggests I´d, is that you try this:

    • Unplug the hybrid cable that you use
    • Uninstall all copies of the printer and its duplicates.
    • Stop the print spooler by using the services on windows (type on cortana services.msc) locate print spooler and stop it
    • Go to run and coil type, look at the Printers folder and delete all the files that are there (if any)
    • Restart the spooler to print services.
    • Download and install this driver package
      http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=FP-148007-1
    • Turn on your printer and connect the cable.

    After this exercise, check to see if windows 10 has managed to find the best driver to use your printer.
    If widows did not automatically find it, try the manual on add a Printer Wizard.

    If not reading as LPT1, check ports either USB00 ' # ' or a port DOT4, those who should be the ports to use.

    I hope this helps you get your printer going again.

    Thank you

  • Weird problem with incorrect color printing

    Hello

    IM facing a weird problem in software hp deskjet 1050.my printer printer all-in-one j410 has 5 modes i.e. normal quality printing, fast draft, simple better paper, Photo paper mode quality best quality & specialty paper better quality.

    When I put take-away color printed a photo in "quality mode best photo paper or specialty paper best quality mode ' on any type of paper, the output is pinkish or bluish.

    Please note im using black and non-rempli, true hp original cartridge 802 tricolor.

    to make things clear, im attaching a scanned photo of my printed paper that have the same images with original print quality modes.

    as you can see in the scanned picture, that we have the fast draft quality to the best quality of photo paper, the blueishness rose.

    Pls help me :-(

    -----------------------------------------

    My Info

    OS: windows 8 pro

    Printers: Hp deskjet 1050 j410

    Hello

    This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

    http://support.HP.com/us-en/document/c04190374

    Good luck!

  • Problem with the new printer print only some word from the quarterdeck documents

    I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

    Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
    Happy Days!
    Bryan

    Hello
     
    This phenomenon only occurs with word documents?
    Have you checked if this happens with any other application?
     
    As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
    To fix printing on word problems, see the steps mentioned in this link:
    http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
     
    Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
     
    If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
     
    Post back with the results, so that we can help you better.
     
    I hope this helps.
     
    Kind regards
    Syed V
    Answers from Microsoft supports the engineer.

  • Problems with the Epson print e-mail

    When I try to print all I get is numbers and letters l it happens when I try to print from the net, as my email address. I think I just need to change a setting, but I don't have the slightest idea what to do for the changes

    I already got in touch with EPSON, cost the problem has something to do with the HTML text

Maybe you are looking for