problem with netflix after upgrading to firefox 6

Similar Questions

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• Problem with WSUS after upgrade of SQL and SCCM

  A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

  The WSUS administration console failed to connect to the WSUS server database.

  Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

  System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

  WARNING: The join order has been applied because a local join hint is used.
  Source .Net SqlClient data provider
  Stack trace:

  to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

  at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

  I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

  I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

  Hello

  This community is for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  SQL Server TechNet forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Problems with mail after upgrade

  After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.

  Is there any solution for this or am I the only one having this problem?

  Thank you

  Bob

  Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

  You can use the guest user or create a new user to test.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Switch to the new user by logging incoming/outgoing or use the fast user switching.

  You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.

  By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

  You still see the issue?

  If Yes, then the problem is with your core files.

  If not, then the problem is in your user folder.

• Problems with calls after upgrade of VCS 8.22

  I've recently updated one of my devices VCS to 8.2.2, but I am having some problems.

  The Setup is as follows:

  VCS-C-1: X8.2.2
  VCS-E: 7.2
  VCS-C-2: 7.2

  EX90s: 7.2

  EX90 > VCS-C-1 (8.2.2) > neighbor area > VCS-E (7.2) > Traversal area > VCS-C-2 (7.2)

  Call is SIP all the way.

  Calls fail in both directions (connects but no audio or video).  Was working fine before the upgrade of VCS-C-1 of 7.2 to 8.2.2.

  If I change the adjacent area of VCS-C-1 to the VCS-E uses a profile of "Custom" with "Duo Video Filter" in position "On", it works very well, although this way I can't use presentation properly.  Even if I have introduced interoperability in any part of the path of the call (force a leg to H323), it works, but again, interoperability has its own set of questions.  Finally, if I register at each endpoint to the VCS-E, everything works, it works just not when you browse all three hop calls.

  The VCS-E is controlled by me, so can be improved if necessary, however VCS-C-2 is in another organization, the upgrade is likely to be much more difficult.

  I know that there are changes to the way video Duo works in X 8 - I noticed that it's moved from an overall command of SIP for by area, I guess it has something to do with it.

  Any ideas?

  Please try to put "Sip media encryption" on page traversal area setting to 'best effort' and give it a try

• Problems with HTTPS access site after upgrading to FireFox 30.0

  I have problems to access our HTTPS Corporate sites after upgrade to FireFox 30.0 of the Mavericks MAC or receive an error message "user not authorized" or the page does not load. I was able to access Web sites mentioned above when you use 29,0 FF. I have read and tried all the items on support to clear the cache and cookies, remove and reinstall the software, trying to change the SSL level & remove the cert8.db and cookie files in the profile.

  Internal just to validate that it was not a problem with our Web site, I tried and was able to access these sites via Safari for MAC Mavericks. I'm looking for what anyone help possible.

  Thank you
  Jim

  Many issues of the site can be caused by corrupted cookies or cache.

  • Clear the Cache

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > network > content caching Web: clear now

  and

  • Delete Cookies

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then confidentiality.
  Under historical, select Firefox will use the custom settings.
  There is a button on the right side, called View the Cookies.

  If there is still a problem,
  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• RoboForm toolbar shows only not after upgrading to FireFox 42

  RoboForm toolbar disappeared after upgrading to FireFox 42. Page modules shows that RoboForm is enabled.

  Thank you for support to enable me to solve the problem that I had but I re-installed RoboForm and now the toolbar is visible. Just a pain in the ass to stop what I was doing to re - install RoboForm; After all that it was working fine before the upgrade.

• Impossible to update Norton Toolbar after upgrade to Firefox 39.0

  Running Windows 7 and Norton Security with backup. Upgrade to Firefox 39.0. Notice that Norton toolbar would be handicapped because is is not compatible. By announcement of Norton, a patch was released that would update the Norton toolbar to a compatible version. Just need to run Norton LIVE UPDATE and reboot several times. Tried to update by these instructions and still Norton toolbar has not been updated to compatible version. The only other suggestion by other users is to uninstall Norton Security with backup and reinstall. I would like to see if there are other options to fix this problem without having to uninstall antivirus whenever a new version of browser is updated.

  Hi loeracs, if the norton update does not work to install the new version of their toolbar on your system, so that you would probably contact symantec technical support help in getting their product to work or to see if there is no work around.

• Question connection with Blast after upgrade to view 6.1.1 ("your office may have a security certificate not approved")

  Hello guys,.

  We are facing a very strange problem with Blast after the upgrade to view 6.1.1. Let me show you the scenario:

  We have two security servers (paired with two servers connection).

  On both servers security (and on the servers of connection), the default self-signed certificate is used.

  Secure Tunnel, PCoIP Secure Gateway and Secure Gateway Blast are activated.

  Users access it from internet via Netscaler which balance the traffic load and present a trusted signed certificate.

  For now I won't go in deeper into the Netscaler configuration, as it was working fine.

  We were on view Horizon 5.2 and everything worked fine! ...

  After the upgrade to view 6.1.1 we are unable to connect using the web browser! We can open a session and select the desktop, but as soon as the connection to the desktop is launched, we receive the following error message:

  "Your Office has been disconnected.

  Try to reconnect to the office...

  Your office can have an untrusted security certificate. Click here to accept the security certificate, then try to connect to your desktop again. »

  

  If we click on the link, we are redirected to something like https://Blast_External_URL:8443/r/F386565D-D068-4AC1-BFD3-3A903CBEB235/certAccept.html , receiving a blank page with the following text:

  "Could not resolve the route of proxy for the request.

  Just before the upgrade, we have been able to use the HTML Protocol! We have does no change at all, so I really think it's related to some changes introduced by the new version of Horizon view, but may not know what is causing the problem.

  No problem connecting with the customer to view Horizon (PCoIP and RDP).

  If in the external URL Blast Secure Gateway, we insert the hostname of the server security instead of the external URL (Netscaler), we are able to connect but of course only from our local network.

  Someone at - it ideas?

  Thank you.

  Hi Calyps0Craig,

  Yes, I found a solution for this. In our case the issue was resolved by changing the configuration of Netscaler.

  In the past, we use SSL offloading and worked all protocols. It seems that with the new version of view SSL offloading does more work.

  Change the Service and virtual server on ports 443 and 8443 for SSL to SSL_BRIDGE solved our problem.

  Hope this will help you.

  Best regards

  Claudio

• I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I've tried everything.

  I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • Firefox crashes or does not - how to fix

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• After upgrade to Firefox 6.0.1 if I click on a link with the central botton of the mouse or by pressing the command key, nothing is happening (it should open link in a new tab). How to solve this problem?

  Don't know if this can help, but in any case, I have a Mac, OS X 10.6.8 and until that I've upgraded to Firefox 6 everything worked as expected.

  The bug is not in update 6.0.1/2 of Firefox, but the addition of Greasemonkey v0.9.10 (a conflict with Tab Mix Plus, I think).

  Upgrade to 0.9.11:
  https://addons.Mozilla.org/en-us/Firefox/addon/Greasemonkey/versions/