Problem with NI DAQ USB 6356

Similar Questions

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• Problem with MX DAQ with USB-6009

  Hey guys, I'd be happy if someone of you can help me!

  I want to measure the tension of a place and it was working fine, but now I want to measure the temperature of the room too... and that's my problem.

  When I put 2 virtual channels DAQ, that it won't work, I get an error when I tried to read the voltage and the temperature.

  Error-50103 occurred at DAQmx Read (analog 1-d Wfm NChan NSamp) .vi:1

  Possible reasons:

  The specified resource is reserved. The operation could not be performed as indicated.

  Task name: _unnamedTask<17C>

  If I click on continue, I get the same error again and again and again...

  Can someone help me on this?

  How can I track more than one thing with DAQ MX?

  Because when the measures only one thing it works, but when I try 2 or more, it's crushing.

  I download the vi and an image with the code!

  Thank you

  You should do something like that. I don't really know if the data is sorted by the column or lines when you return a 2D array. This is for temporary data in the last column. If it is sorted by lines, then wire the '7' in the line of the array Index. Or, move the table to Index at before the transposition table.

  You can use the function remove the table to remove temp data before moving on to the loop for. It is up to you. The for loop you have is built also hurt. Make use of the functionality of an Auto-Index loop and you don't need over to Terminal n of the loop and eliminates the Index table inside the loop function for.

  Spend some time and take the LabVIEW tutorials and look at examples of delivery to get an idea of how do the work of loops and options for indexing tables.

  

• problems with a Toshiba USB external hard drive?

  Hello.

  I have a Toshiba external HD, USB, formatted in FAT 32 connection and I wanted to use it with my MacBook (Mac OS 10.11.3).

  This Toshiba HD just don't climbs on the desk or the show up in disk utility.

  Anyone has the same problem?

  Is there something to do?

  Thank you.

  I have a Toshiba of 3 laptop USB works fine. Typical things to try are:

  1. Restart the computer
  2. Launch disk utility and see if it appears. It cannot be mounted and requires a repair
  3. Reset the SMC reset management system (SCM) controller on your Mac - Apple Support
  4. Connect the drive directly to the computer instead of the hub
  5. Try a different cable

  And if none of these works, try to connect to another computer to see if it works elsewhere.

• Problem with mass storage USB Palm?

  I try to connect to my pre to transfer files and have this in my hardware Manager "a yellow triangle pointing to ( microsoft WPD file system volume driver) the Properties of this so-called" device cannot start. "

  my Pre has 1,103 software web and my computer is Vista Home premium 64 service pack 2.

  I tried all USB ports, and it connects to another computer with XP, all solutions?

  I solved the problem myself, well in fact I created it myself too... I have new security software on my laptop and apparently he can lock all exterior of USB devices unless I agree. Sorry I didn't worry because I love my Palm pre.

  Thanks again and continue to improve I need more things...

• Problem with createinstallmedia bootable USB to install the Mavericks then

  I have tried to make a bootable USB to install the Mavericks on an external partition (so I can continue to use iDVD)

  I downloaded Maverick install app from the App Store and I followed the instructions from Apple by create a bootable OS x - Apple support Installer

  Install OS x player Mavericks appears when I hold down the Option key when starting, but then crashes to a screen of a circle with a line through its Center (the international symbol for 'No!')

  I use OS X El Capitan on a Mac Mini (end of 2012)

  Anyone could advise on what I'm doing wrong?

  I used

  sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction

  in the Terminal

• Problem with traditional DAQ passage to DAQmx using NOR-6534

  I'm moving the traditional following of DAQ code to DAQmx:

  

  This code is used to send data to program a FPGA using a PCI OR-6534 DIO.  This code works like a charm, but when I try to write the equivalent code using DAQmx (in LV 8.6 as well) it does not work.  I don't get any errors, but the FPGA do not program.

  The General procedure is as follows:

  The value of all the lines on the Port exit 0

  Set up the mode of transfer to low Active

  Write the data in the buffer

  Send the data using the internal clock of 10 MHz of the 6534 (6533 is no longer used, but the code was never updated)

  Wait until the output is made

  Disable the task

  In DAQmx I configured as such:

  

  Any ideas on what has changed in DAQmx or what I am doing wrong?

  Looking at your code traditional DAQ once more, he is actually setting up handshaking vs just a straight sample clock.  The Config VI Mode with the "clock polarity" setting is not a sample generated at a certain rate clock, but instead, it's a protocol handshaking attack or the trailing edge.  TDAQ had much more flexibility with what DAQmx and some handshaking protocols are not transferable to DAQmx completely.

  So when you say the configuration of your device in TDAQ bass Active transfer mode, I don't see what is happening in the code TDAQ.  It's really a negotiation protocol of unknown polarity (given that you use a control and I don't see the default value in the public Service).

  You can try to determine which protocol handshake TDAQ you use first, then determine if there is an equivalent for DAQmx.  The three modes that cannot be transferred are level ACK, tip, or long pulse modes.  These have ACK leading REQ, which is not possible for DAQmx to manage.  You can read more in the user guide for the 6534 and starting on page 3 and 4 are the comparison of the different modes of handshake.

  Then move forward options are do not migrate or to download a beta driver TDAQ, if you perform the migration for the purposes of the compatibility of the OS.

  Hope this helps, let me know what other spawn of this.  Thank you.

• Problem with access to USB ports

  Hello. I'm not able to see USB devices when connected to the USB ports. There are four ports on the computer. This means that I can not access the material of any device connected by USB. Can offer you a solution? Thank you. Garfield

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What happens when you connect an external equipment into the system through the USB port, you get an error message?

  I suggest you follow the steps mentioned below.

  Step 1:

  Uninstall and reinstall the drivers for the USB key on the system and check if the problem is resolved.

  a. click on Start menu and click Run.

  b. type devmgmt.msc in the run for the Device Manager dialog box, and then press ENTER.

  c. click USB Universal Serial Bus controllers () and expand the list.

  d. right-click on USB hubs and select uninstall then remove it form the system.

  e. restart the computerand let the drivers for the USB install automatically.

  I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with wireless B USB adapter unable to connect to wireless G router.

  Hi, I had a LInksys Wireless - B 802 adapter. 11B with a computer Win XP and Win 7 Wireless-G Notebook, both to connect to a Linksys Wireless-G Router WRT54G2.

  The Win 7 Wireless - G Notebook no problem to establish the connection to the router. My 802-11b can detect the network Win XP, but cannot establish a connection witht the router. He always acquires IP and then drop out. I re - install the driver and it still the same.

  Originally, I had the WPA-2 personal habit, the 802. 11 b cannot acquire the same IP but you can see the USSID. After that I switched to WPA-Personal, the 802. 11 b try to acquire intellectual property, but fail to connect.

  Pls help. Thank you very much

  If the model number of B-adapter linksys WUSB11 then WPA security does not work as the WUSB11 support only WEP.

• Problem with video playback USB OTP-S185

  Before I bought the S185, I tested my laptop hard drive to an S590.  All formats video my played fine.  Now on the S185, mp4 files created by my Sony EX1R camera cannot be found or read.  I copied the files exactly as they were created. There is a dated folder name, a file BPAV folder CLP, a marked media file, then the media file with other metadata. What is the problem?  Yet once the S590 has no problem finding and reading it.  According to specifications, both players have the same format, reading ability. I tried updating the drive and it did not help.

  Hello USER 965970.
  Welcome to the community of Sony and I thank you for your message.

  Check if the BDPS185 play other video files.
  Try putting only the. MP4 files on the hard drive and check if the Blu - ray player recognizes the files.

  Try to reset the player.
  All personal settings will reset to the default factory settings.

  Using the supplied remote control of the player, press the HOME button.
  Then, select the option settings (brief case icon).
  After that, select the reset option.
  Finally, the option "factory Reset factory settings.

  Thank you.

• scaling problems with the DAQ hardware help

  I am a new user and I'm trying to do a simple scaling of my entries of tension using the DAQ help. For example: a channel entered around 8V on a 0 to 10V input selection. I'm trying to resize it (linear) to show me around 28V using y = mx + b formula. My value of m is 3.2 and b 0. What DAQ Assistant bed is close to 16V instead of 25V (3.2 * 8). I custom make several scales, basically multiplying the entry of 2, 3, 4, 5, & but none exits causes what I expected according to the formula, and even the 5 x the value decrease. If I go to "not to scale", I read 8V, which is what actually happens in the 6255 map. Any thoughts?

  Hello DB66.

  Remember that the scope of the input Signal must be defined scale post. How do you set as your input signal range, you're reading may be scaling themselves within the reach of the input signal. A value of coefficient of 3.2, the stove must be Max = 32 Min =-32, since your device probably has a +/-10V range.

  Hope that helps.

• Problems with devices on USB 2 ports

  When you try to use an external hard drive or USB key, the system recognizes its presence on the G: drive and files on this device are visible in Windows Explorer.  But when you try to read or write from that drive I get an error message saying "Windows could not save all the data for the file G:\$Mft.  The data has been lost.  This error can be caused by a failure of your computer or your network connection.  Please try to save this file elsewhere. "Is this a failure of the driver, and if so where can I get the driver?  Thank you.

  http://www.TomsHardware.com/Forum/245009-32-this

  http://www.FixYa.com/support/t6853453-windows_delayed_write_failed_windows

  You could check these two threads and see if they apply to your question.

  You can open the Device Manager and see if there are any yellow marks and update driver from there.

  What is the make and model of pc, current anti-virus, and operating system and service pack?

• Problem with the transcend USB on Windows 7

  Original title: windows 7.

  I bought 1 new HP probook where Windows 7 Professional pre-installed.

  I have 1 pendrive of transcend.

  This Flash DRIVE works perfectly with all the other PC

  but in this new PC, when I connect this drive icon in "my computer", but weak (as hidden, hidden files display is on)

  When I double click the icon, it opens, but no files are visible (when all files exixting inside is visible in another PC), all trying to paste something, messege to come, "device not available."

  checked in disk management, "disk 1 removable, no media" made its appearance and nothing visible in the area of management of disk to disk.

  anyone, any help?

  Hello

  I would like the season allows you to use different Flash Player on your computer and update the State of the question in order to help you further.

  Thank you!

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye